1. הקדמה
This manual provides essential information for the safe and effective use of your DEWALT DW2218IR Impact Ready Magnetic Nut Driver. The DW2218IR is a 1/4-inch magnetic nut driver designed for use with impact drivers, offering durability and ease of use for various fastening applications. Please read these instructions carefully before operation and retain them for future reference.
Figure 1: DEWALT DW2218IR Impact Ready Magnetic Nut Driver. This image shows the black nut driver with "DEWALT 1/4" printed on its magnetic head, and a hexagonal shank for impact driver compatibility.
2. זיכערקייַט אינפֿאָרמאַציע
Always observe basic safety precautions when using power tools and accessories to reduce the risk of personal injury. This nut driver is an accessory for power tools and should be used in conjunction with the safety guidelines provided with your power tool.
- טראָגן אויג שוץ: Always wear appropriate eye protection, such as safety glasses or goggles, to protect against flying debris.
- טראָגט האַנט שוץ: Use work gloves to protect hands from sharp edges or pinch points.
- זיכערער ארבעטסשטיק: Ensure the material you are working on is securely clampגעהאַלטן אָדער געהאַלטן צו פאַרהיטן באַוועגונג בעת אָפּעראַציע.
- דורכקוקן געצייַג: Before each use, inspect the nut driver for any signs of damage, wear, or cracks. Do not use damaged accessories.
- געהעריק אַטאַטשמאַנט: Ensure the nut driver is correctly and securely inserted into the power tool's chuck or quick-change mechanism.
- ויסמיידן איבער-טייטנינג: Do not over-tighten fasteners, as this can damage the fastener, the workpiece, or the nut driver.
- האַלטן קלאָר: Keep hands, hair, and loose clothing away from rotating parts.
- פאָרלייג 65 ווארענונג: דאס פּראָדוקט קען אייך אויסשטעלן צו כעמיקאַלן באַקאַנט צום שטאַט קאַליפאָרניע צו פאַראורזאַכן ראַק און געבורט-דעפעקטן אָדער אַנדערע רעפּראָדוקטיווע שאָדן. פֿאַר מער אינפֿאָרמאַציע, גייט צו www.P65Warnings.ca.gov.
3. סעטאַפּ
The DEWALT DW2218IR nut driver features a standard 1/4-inch hex shank, making it compatible with most impact drivers and drills equipped with a 1/4-inch quick-change chuck or standard drill chuck.
- אויסקלייבן די ריכטיקע גרייס: Ensure the nut driver size (1/4-inch) matches the fastener you intend to drive.
- אַרײַנשטעלן אין געצייַג:
- For quick-change chucks: Pull back the collar on your impact driver, insert the hex shank of the nut driver fully, and release the collar. Tug lightly on the nut driver to ensure it is securely locked in place.
- For standard drill chucks: Open the chuck jaws, insert the hex shank of the nut driver, and tighten the chuck securely using the chuck key (if applicable) or by hand until the nut driver is firmly gripped.
- באַשטעטיקן זיכערהייט: Always double-check that the nut driver is firmly seated and locked in the power tool before beginning any work.
4. אַפּערייטינג ינסטרוקטיאָנס
Follow these steps for effective and safe operation of the DEWALT DW2218IR nut driver:
- צוגרייטן אַרבעט שטח: Clear your work area of any obstructions and ensure adequate lighting.
- Position Fastener: Place the nut driver onto the head of the fastener (nut or bolt). The magnetic tip will help hold the fastener in place.
- צולייגן דרוק: Apply firm, steady pressure directly in line with the fastener to prevent cam-out or stripping.
- Engage Power Tool: Start your impact driver or drill at a low speed and gradually increase as needed. Maintain control of the tool at all times.
- Monitor Fastening: Continue driving until the fastener is seated to the desired tightness. Avoid over-tightening.
- באַזייַטיקונג: To remove a fastener, reverse the direction of your power tool and apply steady pressure until the fastener is loose.
5. וישאַלט
Proper maintenance ensures the longevity and performance of your nut driver.
- רייניקונג: After each use, wipe the nut driver clean with a dry cloth to remove dirt, dust, and debris. Do not use harsh chemicals or solvents.
- דורכקוק: Regularly inspect the nut driver for signs of wear, such as rounded edges on the hex opening, cracks, or deformation. Replace the nut driver if it shows significant wear or damage.
- סטאָרידזש: Store the nut driver in a dry place, away from moisture and corrosive materials. Keep it in a tool box or organizer to prevent loss and damage.
- מאַגנעט קער: Keep the magnetic tip free of metal shavings, which can reduce its effectiveness. Use a brush or compressed air to clean if necessary.
6. טראָובלעשאָאָטינג
If you encounter issues while using your nut driver, consider the following:
| פּראָבלעם | מעגלעך סיבה | לייזונג |
|---|---|---|
| Nut driver slips on fastener. | Incorrect size, worn nut driver, insufficient pressure, or stripped fastener. | Ensure correct nut driver size. Replace worn nut driver. Apply firm, direct pressure. Replace stripped fastener. |
| Nut driver not holding fastener magnetically. | Magnetic tip is dirty with metal shavings. | Clean the magnetic tip thoroughly to remove any accumulated metal debris. |
| Nut driver wobbles in power tool. | Not fully inserted or chuck not tightened. | Ensure the nut driver is fully inserted and the chuck is securely tightened. |
7. ספּעסאַפאַקיישאַנז
| שטריך | דעטאַל |
|---|---|
| מאָדעל נומער | DW2218IR |
| סאָרט | דעוואַלט |
| טיפּ | Impact Ready Magnetic Nut Driver |
| גרייס | 1/4 אינטש |
| מאַטעריאַל | מעטאַל |
| פּונקט וואָג | 0.96 אונסעס (אומגעפער 0.06 פונט) |
| פּראָדוקט דימענשאַנז | 4.75 X 1.87 X 0.38 אינטשעס |
| שאַנק טיפּ | העקס (1/4 אינטש) |
| UPC | 885911026413 |
8. וואָראַנטי און שטיצן
For detailed warranty information and customer support regarding your DEWALT DW2218IR Impact Ready Magnetic Nut Driver, please refer to the official DEWALT website or contact DEWALT customer service directly. Warranty terms and conditions may vary by region and product type.
You can find more information and contact details on the official DEWALT brand store:
