YHDC SCT016T 16mm Aperture Split Core Current Transformer
Product Information
SCT016T – 16mm Aperture Split core current transformer
The SCT016T is a split core current transformer with a 16mm aperture. It is designed for accurate measurement of electrical currents in various applications.
Characteristic:
- Installation diagram
- Primary threading method: Firing line
Product Application:
The SCT016T can be used in various electrical installations and systems.
Product Advantage:
- Easy to install with a buckle fastening system
- Comes with lead wire for convenient connection
Typical Technical Index:
Output/Outer shell AC: 3.5KV/1min 5mA 50Hz
Electrical Parameters:
The following parameters are typical values and actual values will be subject to product testing.
| Model | Max. Continuous Input Current | Input Current | Output | Turns Ratio | Load Resistance | Accuracy | Linearity | Weight |
|---|---|---|---|---|---|---|---|---|
| SCT016T | 10A | 10mA | 11000 | 10 | – | 0.5%/1% | 1% | 70g |
| SCT016T | 50A | 50mA | 11000 | 10 | – | 0.5%/1% | 1% | 70g |
| SCT016T | 50A | 25mA | 12000 | 10 | – | 0.5%/1% | 1% | 70g |
| SCT016T | 100A | 100mA | 11000 | 10 | – | 0.5%/1% | 1% | 70g |
| SCT016T | 100A | 50mA | 12000 | 10 | – | 0.5%/1% | 1% | 70g |
| SCT016T | 100A | 33mA | 13000 | 10 | – | 0.5%/1% | 1% | 70g |
| SCT016T | 100A | 20mA | 15000 | 10 | – | 0.5%/1% | 1% | 70g |
| SCT016T | 120A | 60mA | 12000 | 10 | – | 0.5%/1% | 1% | 70g |
| SCT016T | 120A | 40mA | 13000 | 10 | – | 0.5%/1% | 1% | 70g |
*Can be customized parameters/lead length/lead specifications according to user requirements.
Wiring Schematic Diagram:
Outline Size:
16mm x 33.5mm x 6mm
For more information, please visit www.poweruc.pl
Front View:
Bottom View:
For output crimp terminal and side view, please refer to the product documentation.
Product Usage Instructions
- Open the buckle on the SCT016T.
- Lift the SCT016T upward to expose the opening.
- Insert the lead wire into the opening.
- Fasten the buckle to secure the lead wire.
Please follow the provided wiring schematic diagram for proper installation.
Note: Ensure that the secondary does not allow short circuit (for voltage output type) or open circuit (for current output type).
Ф16mmAperture Split core current transformer
Characteristic
- Safety lock buckle, easy to install
- Built-in over-voltage protection device (TVS tube)
- Crimping terminal output
- Suspended type
Product application
- Portable instrument
- Household metering
- Monitor motor load
Product advantage
- Small volume Light weight
- Low cost
- High turns High precision
Installation diagram
Primary threading method（Firing line）
Typical technical index
- Material of core——Ferrite
- Working voltage——Phase voltage≤720V
- Working temperature——-25℃～+60℃
- Storage temperature——-30℃～+90℃
- Frequency range——50Hz～1KHz
- Dielectric strength——Input（bare conductor）/output AC 800V/1min 5mA 50Hz
Output/Outer shell AC 3.5KV/1min 5mA 50Hz
Electrical parameters:（The following parameters are typical values and actual values will be subject to product testing）
Max. continuous input current: 120% of rated input
Can be customized parameters/lead length/lead specifications according to user requirements.
Wiring schematic diagram
- Built-in sampling resistance Voltage output type Secondary doesn’t allow short circuit
- TVS: Transient voltage suppressor Current output type Secondary doesn’t allow open circuit
Outline size： (in:mm)：
Documents / Resources
 |
YHDC SCT016T 16mm Aperture Split Core Current Transformer [pdf] Owner's Manual SCT016T, SCT016T 16mm Aperture Split Core Current Transformer, 16mm Aperture Split Core Current Transformer, Aperture Split Core Current Transformer, Split Core Current Transformer, Core Current Transformer, Current Transformer, Transformer |