YHDC SCT013-RJ45 Split Core Current Transformer 

YHDC SCT013-RJ45 Split Core Current Transformer

Introduction

Product picture printing is for reference only, subject to the actual product

Characteristic

Safety lock buckle, easy installation, cable output

Technical index

Mounting type: Free hanging (In-Line)
Material of core: Ferrite
Applicable standards: GB20840-2014
Operating temperature: -25℃ ~ +70℃
Storage temperature: -30℃ ~ +90℃
Frequency range: 50Hz-1KHz
Waterproof grade: IP00
Dielectric strength: Input (bare conductor)/Output AC 800V/1min 50Hz Output/Housing AC 3.5KV/1min 50Hz

Electrical parameters: The following parameters are typical values. The actual values shall be subject to the actual measurement of the product

Rated input 5A 10A 15A 20A 25A 30A 50A 60A 100A A Technical Index

TVS: Transient Voltage Suppressor (7.5V) Voltage output type The secondary is not allowed to short circuit

Rated output

0.333/1

V
Accuracy

1

%
Weight

50g

g
Rated input 100A A Technical Index

TVS: Transient Voltage Suppressor (7.5V) Current output type The secondary is not allowed to open circuit

Rated output 5 0 m A
Turns ratio 1:2000
Sampling resistance 1 0 Ω
Accuracy 1 %
Weight 50g g

Dimensions(in mm±0.5)

Dimensions(in mm±0.5)

Dimensions(in mm±0.5)

Dimensions(in mm±0.5)

Digram

Digram

Digram

Digram

Digram

Digram

Customer Support

www.poweruc.plLogo

Documents / Resources

YHDC SCT013-RJ45 Split Core Current Transformer [pdf] Owner's Manual
SCT013-RJ45 Split Core Current Transformer, SCT013-RJ45, Split Core Current Transformer, Core Current Transformer, Current Transformer, Transformer

References

Leave a comment

Your email address will not be published. Required fields are marked *