YESWELDER Welding Table Instruction Manual

YESWELDER logoWELDING TABLE

YESWELDER Welding TableOPERATOR’S MANUAL

Copyright© YesWelder
YESWELDER Welding Table - icon 1 To help us serve you better, go to www.yeswelder.com

PRECAUTIONS — READ BEFORE USING

warning 2 SAVE THIS MANUAL

Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference. When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please contact customer service on time.

warning 2 WARNING
Read this material before using this product. Failure to do so can result in serious injury.

Important Safety Information
Assembly Precautions

  1. Assemble only according to these instructions. Improper assembly can create hazards.
  2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
  3. Keep the assembly area clean and well lit.
  4. Keep bystanders out of the area during assembly.
  5. Do not assemble when tired or when under the influence of drugs or medication.
  6. Weight capacity and other product capabilities apply to properly and completely assembled product only.

Use Precautions

  1. This product is not a toy. Do not allow children to play with or near this item.
  2. Use as intended only.
  3. Inspect before every use; do not use if parts are loose or damaged.
  4. Do not exceed listed weight capacity, evenly distributed and balanced.
    Be aware of dynamic loading! Sudden load movement may briefly create excess load causing product failure.
  5. Maintain product labels and nameplates. These carry important safety information.
  6. Operate and store the table on a flat, dry, level surface.
  7. Read welding equipment manual before use.
  8. If using gas cylinders, be especially careful to prevent tipping or damage to the cylinders. Follow gas cylinder suppliers and gas supplier’s safety instructions at all times.

SPECIFICATIONS

Material Steel
Color Black
Item Weight 25.5Kg/56.2Ibs
Item Dimensions 885×915×460mm/34.8X36×18.1inch

PACKAGE CONTENTS

YESWELDER Welding Table - Package Contents

ASSEMBLY STEPS

YESWELDER Welding Table - Assembly 1

YESWELDER Welding Table - Symbol 1 ● Attention: During the installation of the welding table, it is recommended to use the provided wrench to tighten the screws.

YESWELDER Welding Table - Assembly 2

Step 1: Install the welding table handle by securing it to the side of the top plate using nuts and bolts.

YESWELDER Welding Table - Assembly 3

Step 2: Install the table legs by fastening four legs to the bottom of the top plate using nuts and bolts.

YESWELDER Welding Table - Assembly 4

Step 3: Install the tool palette by securing it inside the legs with nuts and bolts, choosing a suitable height.

YESWELDER Welding Table - Assembly 5

Step 4: Install the hook side panel by securing it between two table legs using nuts and bolts.

YESWELDER Welding Table - Assembly 6

Step 5: Install the casters by using the nuts provided with the casters to secure them to the bottom of the table legs. Attach the two brake casters on the same side as the handle and fix the swivel caster on the opposite side.

YESWELDER Welding Table - Assembly 7

LIMITED WARRANTY

LIMITED WARRANTY – Subject to the terms and conditions below.
YESWELDER guarantees its equipment to be free from material and workmanship defects at the time of shipment within a limited warranty period. However, the warranty does not cover damage caused by misuse, abuse, negligence, accidents, unauthorized repairs or modifications outside company facilities, criminal activities, improper installation, normal wear and tear, or damage due to lack of maintenance. Additionally, the company is not responsible for death, personal injury, or property damage caused by the use of its products, as well as incidental, consequential, special, or indirect damages arising from product use. Certain state laws may not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty expressly replaces all other express or implied warranties, including warranties of merchantability and fitness for a particular purpose. Warranty claims require presentation of the purchase receipt, so be sure to retain the original invoice or sales receipt.
For warranty service, please contact your YESWELDER distributor.
Effective November 7, 2023

YESWELDER logowww.yeswelder.com

Documents / Resources

PDF thumbnailWelding Table
Instruction Manual · Welding Table, Table

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.