Yale-logo

Yale YRMZ Series Smart Module

Yale-YRMZ-Series-Smart-Module

Assure Lock® 2 Installation

  1. If your lock is already installed, remove the batteries.Yale-YRMZ-Series-Smart-Module-fig-1
  2. Insert the Smart Module into the battery compartment slot.Yale-YRMZ-Series-Smart-Module-fig-2
    Reinsert the batteries.Yale-YRMZ-Series-Smart-Module-fig-3
  3. Open the Yale Access App and navigate to your lock model.Yale-YRMZ-Series-Smart-Module-fig-4
    1. Select ‘Lock Settings’.
    2. Select ‘Yale Smart Module’.
    3. Follow steps in the app to complete set-up.
  4. To remove the Smart Module from your system, unenroll the smart module through the module settings under lock settings in the Yale Access App.Yale-YRMZ-Series-Smart-Module-fig-4

Warning: Anytime you add or remove a Smart Module from your lock, the batteries must be removed.

Assure Lock® Installation

  1. If your lock is already installed, remove the batteriesYale-YRMZ-Series-Smart-Module-fig-5
  2. Insert the Smart Module into the battery compartment slot.Yale-YRMZ-Series-Smart-Module-fig-6
    Reinsert the batteries.Yale-YRMZ-Series-Smart-Module-fig-7
  3. Enter your locks master entry code, followed by the Yale-YRMZ-Series-Smart-Module-fig-8
    1. Press the 7 key followed by the Yale-YRMZ-Series-Smart-Module-fig-8
    2. Press the 1 key followed by the Yale-YRMZ-Series-Smart-Module-fig-8
      If you have SmartStart enabled with your Z-Wave® system, follow in-app prompts to add a new device. If you do not have SmartStart or are not sure, follow the steps below.
  4. To remove the Smart Module from your system, open the smart home or alarm app and follow the instructions for removing a device.
    1. Enter your locks master entry code, followed by the Yale-YRMZ-Series-Smart-Module-fig-8
    2. Press the 7 key followed by the Yale-YRMZ-Series-Smart-Module-fig-8
    3. Press the 1 key followed by the Yale-YRMZ-Series-Smart-Module-fig-8

Warning: Anytime you add or remove a Smart Module from your lock, the batteries must be removed

Changes or modifications to this device, not expressly approved by MASTER LOCK Group could void the user’s authority to operate the equipment. This device is a security enabled Z-Wave Plus™ v2 product that is able to use encrypted Z-Wave Plus™ v2 messages to communicate to other security enabled Z-Wave Plus ™ v2 products. This device must be used in conjunction with a Security Enabled Z-Wave® Controller in order to fully utilize all implemented functions. This product can be operated in any Z-Wave® network with other Z-Wave® certified devices from other manufacturers. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network.

FCC STATEMENT

FCC: U4A-YRHCPZW0FM, U4A-YRHCPZW1FW, MZR-YRHCPZW4FM, U4A-YRHCPZB0FM, MZR-YRHCPZB3FM.
Model: YRMZW2-US, YRMZB2-US, YRMZB3-US AYR-MOD-ZW3-USA, AYR-MOD-ZW4-USA.

Class B Equipment
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful Interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS.

  1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
  2. THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

This equipment complies with the FCC radiation limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Industry Canada: YRMZW2-US, YRMZB2-US, YRMZB3-US AYR-MOD-ZW3-USA, AYR-MOD-ZW4-USA.
IC: 6982A-YRHCPZW0FM, 6982A-YRHCPZB0FM, 2676A-YRHCPZB3FM, 2676A-YRHCPZW4FM, 6982Z-YRHCPZW1FW.

Under Industry Canada regulations,this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. License exempt RSS standards following two conditions: 1) this device may not cause interference, ). Operation is subject to the and 2) this device must accept any interference, including interference that may cause undesired operation of the device.

This radio transmitter has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Any changes or modifications not expressly approved by manufacturer could void the user’s authority to operate the equipment.

IMPORTANT! Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

We’re here to help, 24/7
1-855-213-5841
support@yalelocks.com
support.shopyalehome.com

Yale® is a registered trademarks of Master Lock Company LLC and its affiliates. Other products’ brand names may be trademarks or registered trademarks of their respective owners and are mentioned for reference purposes only. © Copyright 2024. All rights reserved. Reproduction in whole or part without the express written permission of Master Lock Company LLC and its affiliates is prohibited.

Documents / Resources

Yale YRMZ Series Smart Module [pdf] Installation Guide
MZR-YRHCPZB3FM, YRMZW2-US, YRMZB2-US, YRMZB3-US, YRMZ Series Smart Module, YRMZ Series, Smart Module, Module

References

Leave a comment

Your email address will not be published. Required fields are marked *