Yale 7100V Vertical Rod Exit Device Reversible Installation Guide
Product Overview
- A : Top strike
- B : Top latch
- C : Head assembly
- D : Bottom latch
- E : Bottom strike
- F : End plate
- G : Push bar
- H : Dogging
Dogging : Depress push bar , insert dogging wrench and turn 90° The push bar will remain depressed and the latch will remain retracted
Head assembly and end plate Install
- Step 1: Install the head assembly to the door with 4 screws as shown
- Step 2: Install the end plate to the door with 2 screws as shown
Top latch Install
- Step 1: Fix the top latch mounting plate on the door with screws
- Step 2:
- Adapt the top latch to the top latch mounting plate
- Fix the top latch on the door with screws.
- Step 3: Make the latch pin through the latch bolt.
Top strike Install
- Install the top strike to the frame with 3 screws as shown.
Bottom latch Install
- Step 1: Attach the bottom latch set to the fixing set.
- Step 2 : Install the bottom latch set to door with 2 screws as shown.
Bottom strike Install
- Step 1: Drill 0 25/32″ (20mm), depth 4/5″ (20mm) on floor.
- Step 2: Install the bottom strike into floor as shown.
Rod Install
- Step 1: Attach the top rod (long rod) to the top latch.
- Step 2: Attach the top rod to the tube adapter on the head assembly.
- Step 3: The bottom rod should be engaged with the bottom latch sleeve.
- Step 4: Attach the bottom rod (long rod) to the tube adapter on the head assembly.
Product Dimension
Documents / Resources
 |
Yale 7100V Vertical Rod Exit Device Reversible [pdf] Installation Guide 7100V Vertical Rod Exit Device Reversible, 7100V, Vertical Rod Exit Device Reversible, Exit Device Reversible, Exit Device |
