YABER V2 WiFi Mini Projector with Screen Mirroring
INTRODUCTION
Your projector is already in your hands! Let’s get started! Do you have any questions on how it works? Please read this manual thoroughly before using the projector. Are you satisfied with your projector? If you have any issues, email your order number and description of your issue to: Send your email ASAP, as we want to fix your issues the first time you have them. Customers sometimes can experience some confusion when using the projector. Rather than trying to communicate directly with us, many buyers instead just leave a review on the product page. However, most negative reviews are caused by non-standardized use rather than a defect in the product itself. Actually, many problems can be easily solved by setting, such as no signal, no sound,cannot connect with WiFi etc. We promise all the projectors have been carefully checked and packaged before shipping. Therefore, if you have any questions, please contact us and give us an opportunity to improve. We guarantee that we will provide you a more satisfactory solution.
Product Description
- Power
- Arrow Keys
- OK
- Menu
- Source
- Back
- VGA
- IR
- HDMI 1/2 Input
- Headphone Jack(3.5mm)/AV Input
- USB 1/2 Input
- Power Socket
- Keystone Correction
- Manual Focus
YABER Y60 Projector
| YABER Y60 Projector | |
| Imaging System: LCD | Power: 110-240V~50/60HZ |
| Light Source: LED | Resolution:1280*720 (Support 1920*1080) |
|
Projection Distance: 1.5M-5M |
Interface Input: HDMI*2/USB*2/VGA/AV/
Headphone Jack(3.5mm) |
| Projection Size: 50″-200″ | Keystone Correction: ±15°Manual |
| Aspect Ratio: 16:9/ 4:3 | Projector Weight: 1.92KG |
Remote control
- Power: Press this switch when turning on or off the power
- Mute:Turns the sound on or off
- Fast Forward Button: Move forward at a speed faster than that at which it would usually be played
- Fast Rewind Button: Move rewind at a speed faster than that at which it would usually be played
- Play Button: Play or Pause
- OK Button: Confirm
- Volume Keys: Volume up / volume down
- Arrows Key: Move the pointer up, down, left and right
- Source: Change the signal source
- Menu: Call or exit the projector main menu
- Exit
- Previous
- Next
Replace the remote control battery
- Push to open the battery cover.
- Remove both old batteries and install new ones (AA).
- Make sure that the polarity of the batteries (+/-) is correctly aligned
Included
| Main unit of the projector * 1 | Remote control * 1 |
| Instruction manual * 1 | Power cord * 1 |
| 3 in 1 * 1 AV cable | Lens cleaning * 1 |
| HDMI cable * 1 | Support Base*1 |
Thanks
Thank you very much for purchasing the YABER Y60 projector. Please read this instruction manual carefully before use. Also, please keep it handy so you can check it at any time. If in doubt, do not hesitate to contact YABER_Service@outlook.com. We can provide after-sales service until satisfaction.
Observation
Part of the video in Netflix and the main video formats can not be exported externally due to copyright protection (HDCP protocol). But since Amazon Fire TV is HDCP compatible, you can play Netflix and the first video via Amazon fire.
Important safeguards
These safety instructions are to ensure the long life of the projector and to prevent fires and shocks. Read them carefully and pay attention to all warnings.
Installation
- For best results, use the projector in a dark room.
- Place the projector on a flat, level surface in a dry area away from dust and moisture.
- Exposure to direct sunlight, smoke or steam may damage internal components.
- Handle the projector carefully. Falling or shaking can damage internal components.
- Do not place heavy objects on top of the projector.
Supply
- The projector is designed to operate with a 110-240 V ~ 50/60 Hz AC adapter. Ensure that the power supply meets this requirement before attempting to use the projector.
- Handle the power cord carefully and avoid bending it too much. A damaged cord can cause electric shock or fire.
- If the projector will not be used for a long time, unplug the power cord from the outlet.
Cleaning
- Unplug the projector before cleaning it.
- Periodically clean the cabinet with a damp cloth. If it is very dirty, use a mild detergent. Never use strong detergents or solvents such as alcohol or thinners.
- Use a blower or lens paper to clean the lens and be careful not to scratch or damage the lens.
Unable to play video
Is the video format correct? The file is corrupted? The device is damaged
Connection device
Connecting a PC
- Use the supplied VGA cable to connect the PC to the projector.
- Turn on the projector and the computer.
Connecting a smartphone
Connect a phone with Android system:
(Note: check if your Android phone supports MHL function.) MHL-HDMI cable not included)
- Connect the projector and the Android smartphone with the MHL-HDMI cable.
- Choose the signal source: “HDMI”
Connect a phone with IOS system:
- Connect the projector and iPhone with Lightning-to-HDMI cable (not included)
- Choose the signal source: “HDMI”
Connect with an Anycast:
- Plug in Anycast with the micro usb port and another usb port to your power adapter.
- Connect Anycast to your Projector’s HDMI port and switch the Projector source to HDMI.
- You will see the Anycast main menu on the Projector screen.
Connecting a DVD player
- Use the supplied AV cable to connect the DVD player to the projector.
- Turn on the projector and DVD player.
If your player has an HDMI output, it is best to use it over the analog (AV) option. Audio output must be configured from the DVD player menu if external speakers are installed.
Connect the soundbar
- Use the supplied AV cable to connect the soundbar to the projector.
- Turn on the projector and the sound bar.
Adjust the Tilt Base and Hang Ceiling
Adjust the tilt base:
Install the screws (included in the package) to place ①, lift the front edge of the projector to the desired height, turn the presser foot and release the button to lock the tilt base to the appropriate position.
Hang ceiling:
Please purchase the projector stand and 1/4 inch screw additionally. Install the projector stand to place ②, and hang the projector on the ceiling. ( Note: You can install the Tripod Stand to the place ② )
Starting the projector
Turn on the projector by connecting the supplied power cord to the outlet, and then pressing the main power switch. The projector will go into standby mode and the power indicator will light red. Only after pressing the “POWER” button on the projector or remote control will the power indicator turn green and the projector will become ready to use.
Select the signal source:
- Press the “source” button on the remote control or the projector and choose between: “AV”, “PC-RGB”, “HDMI 1”, “HDMI 2”, “USB”.
- Adjust the image size to get the best image size by moving the projector back and forth, then use the focus ring to get the best focus.
Select the language menu
Language menu you have to select it when you turn on the projector for the first time, you will see the interface in English. You can select one of the menu languages: German, French, Italian, Spanish, Japanese and so on.
Please follow these steps:
- Press the “meun” button and find the “OPTION” interface, then find the “OSD Language English”.
- Press the ENTER button to execute the selection
Keystone and Focus
If the projected image is in a trapezoidal shape, it can be resolved by Keystone correction. ( Do Manual Keystone Correction )
Note: If the Keystone correction fail to resolve image shape, please reduce the vertical height of the projector in relation to the center of the screen.
The projected image may be blurry or difficult to see, this is due to lack of Focus adjustment with the lens, please follow the processes below to adjust the Focus. ( Do Manual Focus, find the most sharpness picture on the screen )
Multimedia File Specification
Image Format
| Support | File Extension |
| JEPG, PNG, BMP, MPO | .jpg / .png / .bmp |
Audio Format
| Support | File Extension |
| MPEG1, MPEG2, LPCM, MP3 | .avi / .ts / .dat / .vob / .wav / .mkv /
.mp3 / .mp4 / .m4a |
Video Format ( Bit Rate up to 30~40 Mbs )
| Support | File Extension |
| MPEG1, MPEG2, H.263, H.264, AVS, VC1, MJPEG, RV30, RV40, HEVC | .dat / .ts / .mp4 / .mpg / .mpeg /
.avi / .mkv / .mov / .wmv / .asf / .flv / .3gp. / .3gpp / .tp / .trp |
Press the “MENU” button on the projector or remote control, there are 4 menu options: “Movie”, “Music”, “Photo”, “Text”.
Option Menu
| OPTION | Menu included | Function |
| OSD Language | 20 kinds of languages:English, France, Italian, Spanish, Japanese etc | Choose a language |
| Restore Factory Default | Reset | Reset the device to original
manufacturer settings |
| Blending | Off, Low, Middle, High | Adjust the sound quality |
| OSD Duration | Off, 5Sec, 10Sec, 15Sec | Adjust the on-screen display time |
| Blue Screen | On, Off | Adjust the background color of the screen |
| Software Update (USB) | Update software | Update software |
PICTURE MENU
| PICTURE MENU | Mode | Function |
| Picture Mode | Standard, Soft, User, Vivid | 4 image modes |
| Color Temperature | Medium, Warm, User, Cool | Adjusts the color temperature |
| Aspect Ratio | Auto/ 4:3/ 16:9 | Aspect Ratio lets you configure how images are displayed |
| Noise Reduction | Off, Low, Middle, High, Default | Adjust the Noise reduction mode |
| Projection Direction | Front/Rear on Desk, Front/ Rear on Ceiling | Adjust the projection direction |
| HDMI Mode | AV/PC | |
|
Reduce Display |
75%-100% |
Reduce the projection size |
Sound Menu
| Sound Menu | Mode | Function |
| Sound Mode | Standard, Music, Movie, Sports, User | Adjust the sound mode |
| Balance | -50~50 | Adjust the balance degree |
| Auto Volume | On, Off | Automatic volume adjustment |
Time Menu
Projection Distance and Size
Please follow the data in chart below, to adjust the image size and the distance. (Aspect Ratio: 16 : 9, Default)
| Distance | Screen size |
| 1.52m | 50” |
| 2.15m | 72” |
| 2.93m | 100” |
| 3.48m | 120” |
| 5m | 200” |
Thank you very much for purchasing the YABER Y60 projector.
Please read this instruction manual carefully before use. Also, please keep it handy so you can check it at any time. If you have any problem, please feel free to contact us (Email: service@yabertech.com.), we will always try to offer you a satisfactory solution.
FAQ
At the time of switching on, the indicative light does not work
The power supply may not be well connected Check the overheating protection system
Pressing the power button on the remote control does not turn on the projector
The remote control batteries are empty The signal between the remote control and the IR sensor is obstructed Strong direct light on the IR sensor?
No image on the screen
Is the channel setting correct? Is there an input signal? Is the input cable inserted correctly or is it in the wrong position? In PC mode the refresh rate is> 75KHz?
The image works but there is no sound
Are the input cables connected correctly? Volume at minimum or silent Check that the audio format of the video is in the supported list
Turns off automatically after being turned on for a while
Is there a barrier around the fan? Small or large voltage fluctuations Check the overheating protection system
I can not find devices connected with hard drives or flash drives
Re-insert the device Check if the device is working
How do I connect my phone to my mini projector?
If your phone supports MHL, HDMI alt mode, or DP alt mode, you can connect it to a mini projector using a corresponding cable. Just connect one end of the cable to your phone and the other end to your projector, and the phone will output HDMI to the projector just like a laptop
How do I connect my phone to my LED projector wirelessly?
On your Android, tap [Settings]-[Wi-Fi]. Turn [Wi-Fi] ON. Available networks are shown. Select [Network Display] [Network Display****], and connect to wireless LAN.
Does screen mirroring work with projector?
Most projectors still use HDMI as their standard input port, but a simple adapter such as this one from Monoprice can enable you to connect to your projector with a simple cable.
Do projectors have screen mirroring?
You can select Screen Mirroring settings for your projector and then project images from your mobile device. Press the Menu button
How do I mirror my iPhone to my projector?
Connect your iPhone or iPad and the Projector to the same network. The network can be WiFi or your phone’s hotspot
Can I connect my phone directly to projector?
Nearly every Android device has a USB-C video output port. Most projectors still use HDMI as their standard input port, but a simple adapter such as this one from Monoprice can enable you to connect to your projector with a simple cable.
Does Netflix work on screen mirroring to projector?
You’ll need a Type-C USB cable and Display Port function to stream Netflix from your mobile Android device to the projector.
What devices are compatible with screen mirroring?
You can screen mirror from iPhones, iPads,Android phones and tablets, Chromebooks, Windows PCs, Macs and more. Screen-receiving device:
Is AirPlay the same as screen mirroring?
AirPlay is an Apple system for screen mirroring that enables all Apple devices to wirelessly share the media, such as videos, images, music, to other devices like TVs, etc. This inbuilt feature is available in iOS devices 4.2 or the latest coming devices
