Yaber K2s Smart Projector User Guide

Quick Start Guide
Smart Projector K2s

Contents hide

1 Package Contents

2 Product Overview

3 Install the TV Dongle

4 Alexa Smart Voice Control Setup

5 Turn on Yaber Projector

6 Connect Devices

7 NFC Settings

8 Bluetooth Speaker Mode

9 Quiet Mode

10 Image Adjustment

11 Documents / Resources

11.1 References

Package Contents

Product Overview

Install the TV Dongle

Push once to open the lid, and take out the tray.
Mount the TV Dongle and make sure the Micro HDMI port downside and the Micro USB port upside.

Insert the mounted TV Dongle into the slot.
Plug the USB power cable into the Micro USB port, and push to close the lid.

Alexa Smart Voice Control Setup

Connect K2s to the Wi-Fi network and start Alexa Setup from the projector home screen and log in with your Amazon account.

Open Alexa on your phone and log in with your Amazon account.
Go to More—>Skills & Game, and search for Skills—>Find Whale Video and enable it.
In Whale Video Settings—>Advanced Settings page, pair your projector with your smart speakers (built-in Alexa) to ﬁnish your setup.

Now try this“Alexa, open YouTube on the projector.”

Turn on Yaber Projector

Connect Devices

Yaber K2s projector has 5 ports, HDMI port/USB port/USB-C port/AV_in/Audio out.
Please select the correct connecting port to connect your devices. (PC, Phone, DVD Player, Bluetooth Speaker, USB)

NFC Settings

Download and install E-share App by scan QR code or visit http://h.eshare.app

Make sure your phone and projector are connected to same network, and connect the projector on E-share App.
Go to Settings on E-share App, Select “Write NFC Tags” and follow the prompts to activate the NFC area on the projector.

Now you can tap your phone closely on the NFC area to Screencast while the projector is powered on and on the same Wi-Fi network as your phone.

Note ：

FC screencast requires your phone to touch the NFC detection area on the projector, which may not be suitable for ceiling mounts.
NFC reading areas and the range of your smartphone vary from brand and model. Please refer to your smartphone manufacturer for detailed instructions.

Currently the NFC tag does not support cross-OS use. An activated tag can only be read by casting devices with the same operating system as the setting device.

Bluetooth Speaker Mode

Click the Bluetooth Speaker Mode button on the projector.
Pair the mobile device with the projector to play music.

Quiet Mode

Click the Quiet Mode button on the projector to enter the Quiet Mode, and click again to exit.

Image Adjustment

When you turn on the projector, please wait patiently for 2-3 seconds, the projector will auto focus, auto keystone correct.

Focus AdjustmentIf the image is not clear. You can use the manual focus function, and press the focus buttons “F+” and “F-” on the remote control to adjust the focus of the lens, until the image is clear.
Note : If it is still blurry, please try adjusting to the best projection distance. The best projection distance is 2-3 meters.

Scan and download the PDF user manual

https://www.yaber.com/pages/download

The terms HDMI, HDMI High-Deﬁnition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.