xylem Kor Software

Product Information

Specifications

• Product Name: Kor Software
• Version: 1.4.1.10
• Compatibility: EXO and Pro Series instruments
• Features: Sensor calibration, long-term deployment setup, peak performance monitoring

Product Usage Instructions

Installation

To install Kor Software, follow these steps:

1. Download the software from the official website.
2. Run the installer and follow the on-screen instructions.
3. Launch the software after installation is complete.

Calibrating Sensors

To calibrate sensors using Kor Software:

1. Connect the sensor to the software interface.
2. Access the calibration settings within the software.
3. Follow the on-screen prompts to calibrate the sensor accurately.

Data Management

To manage water quality data:

1. Import data into Kor Software.
2. Utilize the Table Configuration tool to customize parameter order.
3. Export data to a CSV file for further analysis.

Peak Performance Monitoring

To ensure equipment is operating at peak performance:

1. Regularly check for firmware updates.
2. Monitor data imports for any issues.
3. Handle parameters effectively to optimize equipment performance.

Frequently Asked Questions

• Q: What instruments are compatible with Kor Software?
  • A: Kor Software is compatible with EXO and Pro Series instruments.
• Q: How can I rearrange parameters in Recorded Data using Kor Software?
  • A: You can use the Table Configuration tool to rearrange parameters and export data to a CSV file, allowing customization of parameter order.

INTRODUCTION

Kor Software

VERSION 1.4.1.10

Kor Software is an accessible, feature-rich platform for managing YSI instrumentation and water quality data. Easily calibrate sensors, setup long-term deployments, and ensure equipment is operating at peak performance.

Compatible Instruments:
Kor Software replaces both KorEXO and KorDSS as the primary user interface for managing EXO and Pro Series instruments and data.

• EXO Sondes
• EXO Handheld
• ProSwap Logger
• ProDSS Handheld
• ProSwap Handheld
• ProSolo Handheld

Kor Software — v1.4.1.10

October 2024

What’s New

Resolved multiple bugs and timing issues related to firmware updates, data imports, and parameter handling.
Change Notes:

• Fixed bug where Kor was failing to update the firmware on attached sensors via Bluetooth
• Fixed bug where NaNs were displayed after a firmware update
• Corrected a timing issue for Kor requesting the post calibration value from NitraLED sensors earlier than it was being saved by the sensor
• Fixed bug when importing .bin files from an EXO Handheld where not all of the files were importing
• Added capability to filter out received parameters with certain parameter IDs to stop the ProSwap Cable Assembly (No Depth) from incorrectly throwing an exception on connection

Kor Software — v1.4.0

February 2024

What’s New:

Among various improvements and bug fixes, the primary feature added is the Table Configuration tool to rearrange parameters in Recorded Data and export that data to a CSV file. This allows users to customize the order (columns) of their parameters in their data export file to match the parameter order of their preferred data management software.
Change Notes:

• Automatic time sync of all connected instruments on connection
• Manual time sync of all connected instruments
• Fixed bug where QC Score did not include battery level
• Fixed bug where DO sensor cap KC value was not showing on Instruments and Sensors page when DO was selected first
• Added full support for ODO-T and ODO-CT sensors
• Fixed bug where optical sensors were not turning off properly during calibration
• Added the Table Configuration tool in which allows users to reorganize the order in which parameters are displayed in table view in Live and Recorded Data; this custom order is applied to the CSV export file.
• Improved NOM coefficient calculation for NitraLED site correction and removed NOM slider
• Corrected display of wiper calibration record

Kor Software — v1.3.5.0

November 2023

What’s New:

Bug fixes and added export functionality.
Change Notes:

• Bug fixes for database imports
• Bug fixes for handheld downloads
• Improvements to Modbus enable/disable interface for ProSwap Logger
• Added export function for Pro Series instrument configuration
• Added print and export function for EXO NitraLED site correction and calibration
• User Interface corrections

Kor Software — v1.1.8.0
September 2021

What’s New:

This release corrects an issue with the ProDSS database import that previously resulted in a crash.
Change Notes:

• Fixed issue in DSS database import process
• Added routine to existing databases

YSI, a Xylem brand 1725 Brannum Lane Yellow Springs, OH 45387
© 2024 Xylem, Inc. XA00189-04 1024

• +1.937.767.7241
• info@ysi.com
• YSI.com

Who’s Minding the Planet?®

a xylem brand

Documents / Resources

xylem Kor Software [pdf] Instruction Manual EXO, Pro Series, Kor, Kor Software, Software

References

• User Manual