MTPADP-XPR-2.0 Multi Technology Backlit Keypad and RFID Reader 

MTPADP-XPR-2.0 Multi Technology Backlit Keypad and RFID Reader

Generate encryption file

Cards encryption can be used with Mifare Desfire cards. Encryption provides higher level of security where card is accepted by its encrypted content instead of built in card serial number.

You can skip this step if the encryption of the Mifare Desfire cards will not be used.

Click on Settings/System parameters menu

Open Card encryption tab in System parameters window

Generate encryption file

Open Card encryption tab in System parameters window

Generate encryption file

a. To create new encryption 

  • Click on Setup Encryption tab.
  • Enter required parameters or click on Generate tab to load random values.
  • Click on Save tab

b. To import encryption from other system 

  • Click on Import encryption from file tab.
  • Select the encryption file (*.desencb)
    Generate encryption file
  • Click on Open tab
  • Enter the encryption file password
    Generate encryption file
  • Click on OK tab

c. To export the encryption to file 

After creating the encryption, you can export it to file to be used in other systems.

  • Click on Export Encryption to file tab.
  • Select file location and name the file
    Generate encryption file
  • Click on Save tab
  • Enter password for file
    Generate encryption file
  • Click on OK tab

Reader configuration

  • Make sure the controllers are added in the system
  • Open the reader properties
    Generate encryption file
  • Select the correct reader type
  • Follow the instruction on the right side

Encrypting cards

Readers that are configured with enabled Mifare Desfire encryption will accept only Mifare cards that are encrypted.
Readers that are configured with disabled Mifare Desfire encryption will accept all Mifare cards.

  • Open Users management window
  • Connect desktop reader to PC to enable Encrypt card tab
  • Click on Encrypt card tab to open Card encryption window
    Generate encryption file
  • Click on the help tab (?) to open the manual
    Generate encryption file
  • Follow the manual to manage encrypted cards

Customers Support

All product specifications are subject to change without notice.

www.xprgroup.com

Logo

Documents / Resources

xpr MTPADP-XPR-2.0 Multi Technology Backlit Keypad and RFID Reader [pdf] Instructions
MTPADP-XPR-2.0 Multi Technology Backlit Keypad and RFID Reader, MTPADP-XPR-2.0, Multi Technology Backlit Keypad and RFID Reader, Technology Backlit Keypad and RFID Reader, Backlit Keypad and RFID Reader, Keypad and RFID Reader, RFID Reader, Reader

References

Leave a comment

Your email address will not be published. Required fields are marked *