XPR Group XPR Smart Access User Manual

XPR Smart Access
Mobile Application for Android
USER MANUAL

Contents hide

1 Minimum requirements:

2 Documents / Resources

2.1 References

3 Related Posts

Minimum requirements:

Phone with Android version 6.0
Watch with Android Wear version 2.0 and above

App permissions required:

Bluetooth

Location

Fig. 1: • Run the XPR Smart Access APP.
Fig. 2: • Click on the menu at the top left corner and select “My Devices” tab to open the devices window.

Fig. 3: If the reader is in the Bluetooth range (3-5m), it will be listed with his ID and white background.
If the reader is already added and in the Bluetooth range, it will be listed with green background. If the reader is already added and not in range, it will be listed with yellow background.

Fig.4 & 5: Click on the reader to add it as new or edit the login details.
Type device name by your choice, pairing key and password provided from the device administrator. Your entry PIN code is used as password for login. Type friendly names for two relays in the device.

Fig.6: Make sure you are in the Bluetooth range of the device and click on ”Save“ Tab.Fig. 7: Click on the menu tab to return to the main page. If the credentials are correct, the reader will be shown on the screen. Added readers that are in the Bluetooth range will be listed at the top of the screen. Select the reader and use listed tabs to send the command to the reader. If the reader is not listed, but in range, click on the refresh button at the top right corner to scan for available readers.

Fig. 8: You can set your Application protection at section “Settings”.
Fig. 9: You can choose your local area language availability at section “Language”.Fig. 10: App can be also used with Android Wear version 2.0 and above.

Fig.11: Run XPR Smart Access App on your phone and on your watch. Click on the watch icon in the navigation bar to synchronize your watch with your mobile. After synchronization all available readers are visible at your smart watch.