XPG HURRICANE MAG 120 ARGB PWM Magnetic Fan
Product Specifications
| Specification | Details |
|---|---|
| Dimensions | 120 x 120 x 25mm |
| Bearing Type | Rifle Bearing |
| LED Profile | Addressable RGB LED |
| Connector | 4-Pin PWM |
| Lighting Connector | 5V 3-pin ARGB |
| Fan Direction Mode | Standard (Counterclockwise) / Reverse (Clockwise) |
| Speed (RPM) | 2000 RPM |
| Maximum Air Flow | 54.82 ± 10% CFM (Standard) / 49.27 ± 10% CFM (Reverse) |
| Maximum Static Pressure | 2.74mm-H2O (Standard) / 3.29mm-H2O (Reverse) |
| Average Noise Level | 23.36 dBA (Standard) / 31.36 dBA (Reverse) |
| Fan Rated Voltage | DC 12V |
| LED Rated Voltage | DC 5V |
| Operating Voltage | DC 7V~12V ± 5% |
| Fan Starting Voltage | DC 7V |
| Fan Rated Current | 0.2A (Max) |
| LED Rated Current | 0.86A (Max) |
| Fan Protection | Auto-Restart |
| MTTF (Lifespan) | 160,000 Hours @ 40°C |
| Power Dissipation | 1.56-2.4W |
Product Usage Instructions
Fan Installation
- Connect the first fan in the chain to the fan controller. Align the fan’s pin with the connector on the controller, then firmly push the controller up to secure the connection.
- Link the magnetic connectors of the fans together. Make sure the connectors are oriented correctly.
Cable Connection
- Connect the 3-Pin ARGB connector to the motherboard’s ARGB header.
- Connect the 4-Pin PWM connector to the motherboard.
- Connect the case’s Reset Switch to the fan’s Reset Header for easy controller switch (after connection, you can click the reset button to change fan direction).
Controller Operation
Connect the controller to your fans. Change the fan direction by pressing the switch. Wait a few seconds for the LED indicator to change to the next color.
Interlocking Error Prevention Design
With an additional Fan-to-Fan extension cable, you can easily adjust your fan connection to suit any scenario you want.
Switch LED Indicator Description
- Blue: Standard (Counterclockwise)
- Red: Stop
- Green: Reverse (Clockwise)
Package Content
Overview
Controller with Power Cable
Fan-to-Fan Extension Cable
Fan Installation
Magnetic fans
- Connect the first fan in the chain to the fan controller. Align the fan’s pin with the connector on the controller, then firmly push the controller up to secure the connection.
- Link the magnetic connectors of the fans together. Make sure the connectors are oriented correctly.
- With an additional Fan-to-Fan extension cable, you can easily adjust your fan connection to suit any scenarios you want.
Cable Connection
- Connect the 3-Pin ARGB connector to the motherboard’s ARGB header.
- Connect the 4-Pin PWM connector to the motherboard.
- Connect the case’s Reset Switch to the fan’s Reset Header for easy controller switch (after connection, you can click the reset button to change fan direction).
Controller
Connect the controller to your fans. Change the fan direction by pressing the switch. Wait a few seconds for the LED indicator to change to the next color.
| LED Color | Fan Mode |
|---|---|
| Blue | Standard (Counterclockwise) |
| Red | Stop |
| Green | Reverse (Clockwise) |
Learn More
FAQ
Q: What is the purpose of the Reset Header on the fan?
A: The Reset Header allows you to easily change the fan direction by connecting it to the case’s Reset Switch. Pressing the reset button will change the fan direction.
Q: How do I connect multiple fans together?
A: You can connect multiple fans together using the Fan-to-Fan extension cable provided in the package. Ensure that the magnetic connectors are oriented correctly for a secure connection.
Documents / Resources
 |
XPG HURRICANE MAG 120 ARGB PWM Magnetic Fan [pdf] User Guide HURRICANE MAG 120, HURRICANE MAG 120 ARGB PWM Magnetic Fan, ARGB PWM Magnetic Fan, PWM Magnetic Fan, Magnetic Fan, Fan |