XMCOSY 2A2QE-XMSCH-15 Smart RGBCW String Lights

Smart RGBCW String Lights User Manual

Download XMcosy APP

Need Help?
Email:support@xmcosy.com

Safety Information

Read and follow all the safety instructions:

• This product is rated as IP65 Waterproof. It can be used outdoors but cannot be immersed in water.
• Risk of Electric Shock. Install the adapter to a covered Class A GFCI receptacle that has an enclosure that is weatherproof with the attachment plug cap inserted or removed.
• Make sure to unplug the smart string lights during installation.
• Do not allow children to assemble and install this product without adult supervision.
• Avoid installing this product near major heat sources.
• Use this product with the provided power adapter only.

Introduction

Thank you for choosing XMcosy Smart String Light. This product requires pairing with XMcosy app via Bluetooth or Wi-Fi for daily use. Through the app, you can adjust its color and brightness, customize lighting effects, sync the lights with the music rhythm, set the timer to turn on or off automatically, etc. (Please note that only 2.4G Wi-Fi pairing/connection supports all the smart features)

Specifications

• LED Color: RGBCWIC
• Input Volts: 110-240V AC
• Output Volts: 24 V DC
• Max Wattage: 36 W
• Waterproof Rate: IP65
• Working Temperature: -4°F-104°F

Installation

1. Hooks and Ties
2. Controlling String Lights in Series
   Connect 2 strings in series as shown in the image.

Note: Only 65 bulbs can be connected in a series.

Pairing Your String Light with XMcosy APP

Adapter Instruction

• Short press to turn the light on or off.
• Long press for 5-10 seconds to enter pairing blinking state or reset.

What You Need:

• A Wi-Fi router supports the 2.4GHz band. 5GHz is not supported.
• A smartphone or tablet running IOS or Android.
• Download the latest XMcosy App from the App Store(IOS devices) or Google Play(Android devices).
• Turn on your phone’s Bluetooth, WLAN, Cellular(Mobile data), Location(while using app) and allow the XMcosy app to use them.
• Near your phone to the adapter while connecting, within Bluetooth or Wi-Fi coverage.

Notes

• After the light is successfully paired to App via 2.4G Wi-Fi, you can control it via the app at anytime, regardless of whether the phone is using 5G Wi-Fi or only Cellular (Mobile data).
• If no 2.4GHz Wi-Fi, you can just use Bluetooth and Cellular (Mobile data) to pair with the App. Please know that the Bluetooth connection range is within 30ft.

Pairing Steps

1. Long press the button on the adapter for 5-10 seconds to enter pairing state (quickly flash).
2. Open the app, tap the “+” icon in the top right corner, and a device icon will pop up automatically. Then click the “Add” and the “+” button.
3. Select a 2.4GHz Wi-Fi and enter the correct password (case-sensitive).Then click “Next”.(If you do not have Wi-Fi in use, you can click “Skip” to pair via Bluetooth. Note that Bluetooth connections CANNOT use some smart features)
4. Wait for the device to finish adding, then click “Done”. The device can now be controlled.

Alexa / Google Assistant Pairing Instruction

1. After the string light is successfully paired with the XMcosy App, click the icon in the upper right corner of the control page to enter the setting page.
2. Select the corresponding device and follow the steps on the screen to bind XMcosy App to the “Alexa” or “Google Home” App.

APP Functions

First, enter the actual number of bulbs connected to a single adapter.

Set each light bulb to your own color.
DIY dynamic lighting with multiple preset scenes for holiday/party/events.
Music sync mode via the smartphone’s mic.
Use “Plan” to set lights to auto-turn on/off at the time you want.
“Share Device” to others and “Create Group” to control multiple string lights.
Voice commands Alexa or Google Assistant to turn on/off, adjust brightness, color, etc.

For more details about different features, please scan the QR code：

Troubleshooting

Problems	Solutions
Network is 5.0GHz Used in a place without 2.4GHz WiFi Do not want to connect 2.4GHz WiFi	2.4GHz Wi-Fi Pairing(support all functions):A typical router will include dual bands of wifi at 5GHz and 2.4GHz. Try to use AP mode to connect the device.(Scan the QR code to view the Pairing video) Suggest to log in to the router’s management page and split the SS lD of 2.4GHz and 5GHz networks to distinguish them. Bluetooth Pairing Only(support partial functions): Turn on smartphone’s Bluetooth, Cellular(Mobile data), Location(while using app). Long press the button on the adapter for 5-10 seconds to enter pairing state(quickly flash). Open the app, click “Add Device”. Skip the Wi-Fi input page and complete the connection.
Some functions don’t work Timer Share Device Create Group	Bluetooth pairing does not support these functions To use more smart features, please check the pairing steps to pair the app using 2.4GHz Wi-Fi.
Failed to pair with XMcosy APP	Make sure your smartphone’s Bluetooth is enabled. Make sure you select a 2.4GHz Wi-Fi and enter the correct password (case-sensitive) when first pairing. Bring your smartphone close to the power adapter.
Some light bulbs do not turn on Some light bulbs are uncontrolled(flashing or wrong color)	Manually adjust the cable wire near the first uncontrolled bulb to make sure they are not twisted or pinched. Gently push on the LED cob in the socket, tighten the bulb cover.

Problems	Solutions
All Light bulbs flashing or on but are uncontrolled Device shows offline at App Lights cannot respond to App	Press the button on the adapter to see if the adapter work properly. If not, the adapter needs to be replaced. If yes, please follow steps below: Make sure the smartphone have a good cellular network signal. Turn on the Bluetooth, Location(while using app). If using Bluetooth pairing, keep your phone close to the power adapter while using it. If using 2.4GHz Wi-Fi pairing, make sure the Wi-Fi signal is good. If problem persists, click the icon  in the upper right corner of the device control page and tap “Remove Device”→”Disconnect and wipe data”. Unplug and re-plug the power supply. Long press the button on the adapter to reset and re-pair the device. Check if too many smart devices are connected to a single network. If so, change to another network.
All Lights cannot turn on even press the adapter’s button	Make sure the power supply is working. Make sure the connection of adapter cord is tight.
More operation guide is needed	Open XMcosy App, tap Me → FAQ & Feedback, to find more instructions in Help Center.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

CAUTION: Suitable for outdoor/indoor use.

• DO NOT IMMERSE IN WATER.
• DO NOT EXCEED RATED CAPACITY.

For any product or usage issues, please email support@xmcosy.com or scan the QR code

Warranty: 1-year with proof of purchase
For more info, new releases, user events etc., pls follow XMcosy+ social media: Official Website:
www.xmcosy.com

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The digital apparatus complies with Canadian CAN ICES‐3 (B)/NMB‐3(B).

Documents / Resources

XMCOSY 2A2QE-XMSCH-15 Smart RGBCW String Lights [pdf] User Manual XMSCH-15, 2A2QE-XMSCH-15, 2A2QEXMSCH15, 2A2QE-XMSCH-15 Smart RGBCW String Lights, 2A2QE-XMSCH-15, Smart RGBCW String Lights, RGBCW String Lights, String Lights

References

• User Manual