XIGMATEK Cubi-M-Nano RGB CPU Case
Specifications
-
- Motherboard Screw & 2.5 Drive Screw: x10
- 3.5 Drive Screw: x4
- Power Supply Screw: x5
- Motherboard Stand-off: x3
- Cable Tie: x5
- Case Features:
- Front Side Panel A
- Left Tempered Glass Panel B
- Corner Tempered Glass Panel C
- Right Side Panel D
- Power Button E
- HD Audio, USB 3.0 x2, Type C x1, Reset Button, LED Switch F
- LED G, Dust Filters H
Product Usage Instructions
Remove Side Panels:
Remove the screws holding the side panels in place and gently slide them off to access the internal components of the case.
Motherboard Installation:
Install the motherboard by aligning it with the stand-offs on the case and securing it with the provided screws.
Graphics Card Installation:
Insert the graphics card into the appropriate PCIe slot on the motherboard and secure it with screws if necessary.
Power Supply Installation:
Secure the power supply unit in the designated area of the case using the provided screws.
3.5 & 2.5 Drive Installation:
Mount the 3.5 or 2.5 drives onto the drive bays inside the case using the respective screws.
Fan Installation:
Install fans of different sizes (120mm or 140mm) in various locations as per your cooling requirements.
Liquid Cooling Installation:
If using liquid cooling, follow the specific instructions for installing the liquid cooling system, ensuring proper fit and connections.
FAQ
- Q: What size fans can be installed in this case?
- A: The case supports fan sizes ranging from 120mm to 140mm in various locations for optimal cooling.
- Q: How many drive bays are available for 3.5 and 2.5 drives?
- A: The case provides bays for both 3.5 and 2.5 drives, allowing for flexible storage options.
- Q: Is liquid cooling supported in this case?
- A: Yes, the case is designed to accommodate liquid cooling systems for efficient CPU cooling.
Accessory Pack Contents
Case Features
- A Front Side Panel
- B Left Tempered Glass Panel
- C Corner Tempered Glass Panel
- D Right Side Panel
- E Power Button
- F HD Audio, USB 3.0 x2, Type C x1
- G Reset Button, LED Switch
- H Dust Filters
Remove Side Panels
Motherboard Installation
Graphics Card Installation
Power Supply Installation
3.5” & 2.5” Drive Installation
Fan Installation
Top: 120mm x2 or 140mmx2- MB Panel: 120mm x2
- Bottom: 120mm x2 or 140mmx2
- Rear: 120mm x1
Liquid Cooling Installation
Documents / Resources
 |
XIGMATEK Cubi-M-Nano RGB CPU Case [pdf] User Manual Cubi-M-Nano, Cubi-M-Nano RGB CPU Case, RGB CPU Case, CPU Case, Case |
