P8 Neo AI POS Terminal
“
Product Specifications:
- Type: P8 Neo
- Features: Magnetic Stripe Card Reader, USB Type-C, Scanner
& Back Camera, Thermal Printer, Front Camera, IC Card Reader,
NFC Card Reader, Hand Stripe Ring - Display: 6.517″ with NFC antenna at the bottom
- Dimensions: 25.00mm x 12.30mm x 15.00mm
- Card Compatibility: Mini SAM, Nano SIM
Product Usage Instructions:
1. Powering On and Off:
To power on the device, press the Power Button. To power off,
press and hold the Power Button until the device shuts down.
2. Using the Card Readers:
Insert the Magnetic Stripe Card or IC Card into the respective
card reader slots for scanning and processing.
3. Camera Usage:
Utilize the Front and Back Cameras for capturing images or
scanning barcodes. Access the camera functions through the device’s
interface.
4. NFC Functionality:
The device supports NFC technology. Ensure NFC is enabled in
settings for compatible operations such as data transfer or
payments.
5. Thermal Printer:
For printing receipts or documents, load the thermal paper into
the printer and initiate printing from the device’s software.
Frequently Asked Questions (FAQ):
Q: What should I do if I encounter connectivity issues?
A: If you experience connectivity problems, try the following
steps:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver. - Connect the equipment into an outlet on a different
circuit. - Consult the dealer or a professional technician for
assistance.
Q: Can I modify the device without approval?
A: Making changes or modifications without proper approval may
void your authority to operate the equipment. Seek professional
advice before altering the device.
Q: What are the FCC Rules compliance requirements?
A: The device complies with Part 15 of the FCC Rules. It must
not cause harmful interference and should accept any received
interference to maintain proper operation.
Q: How should I ensure RF Exposure compliance?
A: Maintain a minimum distance of 10mm between the device’s
radiator and your body to meet FCC RF Exposure requirements. Do not
operate this transmitter alongside other antennas or
transmitters.
“`
Type-C/POGO PIN
P8 Neo
Magntic Stripe Card Reader
USB Type-C
Scanner&Back Camera 2″ Thermal Printer
Front Camera
Power Button Functional Button
IC Card Reader
6.517″ Display with NFC antenna at bottom
NFC Card Reader POGO Pin
Hand Stripe Ring
25.00mm 12.30mm
15.00mm Mini SAM
8.80mm Nano SIM
Mini SAM Nano SIM
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC RF Exposure requirements: This equipment has been tested for SAR compliance. This equipment should be installed and operated with minimum distance 10 mm between the radiator and your body. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter.
Documents / Resources
 |
XIANGCHENG P8 Neo AI POS Terminal [pdf] User Guide P8 Neo, P8 Neo AI POS Terminal, AI POS Terminal, POS Terminal, Terminal |