victron energy GX IO-Extender 150 Enhanced Input and Output For GX Devices

Intshayelelo
I-GX IO-Extender 150 yimodyuli yokwandisa edityaniswe ne-USB eyandisa izibuko ze-IO ezikhoyo zezixhobo ze-GX ezifana ne-Ekrano GX kunye neCerbo GX.
Ivala umsantsa phakathi kwesixhobo sakho se-GX kunye nehlabathi langaphandle, idala amathuba angapheliyo okubeka iliso, ukulawula kunye nokuzenzekelayo.

Iimbonakalo

• Ii-IO zedijithali ezisi-8, ezilungiselelwa njengeseti ezimbini zezine njengamagalelo okanye iziphumo (ngokutshintsha kweDIP).
• 4 PWM ports, 0 to 5V with 0.04V steps for device regulation.
• I-2 latching relays ezigcina imeko yazo nokuba amandla alahlekile.
• I-1 yokutshintsha okuqinileyo kunye ne-bat-, umthwalo, kunye ne-bat + ukudibanisa kwiimfuno zokutshintsha.

Uqhagamshelo lwe-USB lweplagi kunye nomdlalo lwenza ukuba ufakelo lungasebenzi. I-GX IO-Extender 150 ifakwe nje kwi-port ye-USB ekhoyo kwisixhobo se-GX kunye neegalelo / iziphumo, ii-PWM kunye nee-relays ngokukhawuleza zifumaneka kwisistim.
Nokuba ulawula ufakelo oluntsonkothileyo olungekho kwigrid yofakelo lwelanga, inkqubo yombane waselwandle, okanye isisombululo samandla esigcinwa kwimizi-mveliso, i-GX IO-Extender 150 yandisa isakhono sakho sokunikezela ngeemfuno ezithile:

• Beka iliso kwiinzwa ezongezelelweyo kunye nezixhobo
• Lawula izixhobo zangaphandle ngokuchanekileyo
• Yenza iimpendulo zenkqubo entsonkothileyo
• Sebenzisa ingqiqo yolawulo oluntsonkothileyo

I-GX IO-Extender ayenzelwanga ukuba isetyenziselwe ukutshintshwa komthwalo jikelele, kodwa kunokuba ibonakaliso. I-relays kunye nokutshintsha okuqinileyo kunemilinganiselo ephantsi yangoku eyahluka ngokusekelwe kwi-voltage isetyenziswa. Iimveliso ezihambelanayo ezifana nezo zivela kwi-Energy Solutions (UK), i-Garmin (e-USA) kunye ne-Safiery, kunye nezinye ziya kulungeleka ngakumbi kwizicelo zokutshintsha ngokubanzi.

I-Relay kunye ne-Solid Switch specs

Latching iireyidi
Ukalo loqhagamshelwano (umthwalo oxhathisayo):

• DC: 3 A @ 30 V, 1 A @ 60 V, 0,3 A @ 220 V (max. 90 W)
• AC: 2 A @ 60 V, 1 A @ 125 V, 0,5 A @ 250 V (max. 125 VA)

Ukutshintsha okuqinileyo

• Max. ibhetri voltage: 70 VDC
• Max. umthwalo wangoku: 4 A
• Max. umthwalo onamandla:
  • Vbat ukuya kuthi ga kwi-15 V: 1000 µF
  • 15 V < Vbat < 30 V: 400 µF
  • 30 V < Vbat < 70 V: 50 µF
• Max. umthwalo ongenisayo:
  • Ukuya kuthi ga kwi-1 A: 1000 mH
  • 1 A < I < 2 A: 100 mH
  • Ngaphezulu kwe-2 A: 10 mH

Ukuhlohla

I-GX IO-Extender 150 isebenza nazo zonke izixhobo ze-GX kodwa isetyenziswe kakuhle ngokudibanisa ne-Node-RED. I-Node-RED ayixhaswanga kuzo zonke izixhobo ze-GX. Jonga kuxwebhu lweVenus OS Enkulu ngolwazi oluthe kratya malunga nokuba zeziphi izixhobo ze-GX ezixhasa iNode-RED.
Ukufakela i-GX IO-Extender 150:

1. Sebenzisa iiswitshi ze-DIP kwibhanki nganye ye-4 yedijithali ye-I / Os ukuyibeka njengamagalelo ama-4 okanye iziphumo ezi-4 (ON = imveliso, OFF = igalelo). Qaphela ukuba utshintsho kwiiswitshi ze-DIP zifuna umjikelo wamandla wesixhobo.
2. Qhagamshela intambo ye-USB ye-GX IO-Extender 150 kwizibuko elikhoyo kwisixhobo se-GX. Qaphela ukuba izibuko le-USB elikufutshane kwizibuko le-HDMI kwezinye iimodeli zeCerbo GX zisenokungalungeli le njongo. Nceda ujonge kwimanuwali yesixhobo se-GX ngolwazi oluthe vetshe.
3. Qinisekisa i-GX IO-Extender 150 inikwe amandla ngoqhagamshelo lwe-USB.
4. Sebenzisa i-console ekude kwi-GX ukuze uphindeview iireyidi ezongezelelweyo, iiPWM kunye negalelo ledijithali okanye iziphumo ezifumanekayo kwisistim.

Hardware
Onke amazibuko kwi-GX IO-Extender 150 axhotyiswe ngee-LED eziluhlaza okanye eziorenji ukubonisa imeko yazo yangoku.

Iziphumo zedijithali zenzelwe iinjongo zokubonisa kuphela kwaye kufuneka zingasetyenziselwa ukutshintsha imithwalo ngokuthe ngqo. Iziphumo ze-PWM zifanelekile kwizicelo ezifana nokukhanya kwe-LED, ulawulo lwesantya semoto, kunye nezicelo ezifanayo.

Inqaku lobuGcisa: Ngalo lonke ixesha ujonge awona mlinganiselo aphezulu kudidi lwemveliso nganye kwiphepha ledatha ye-GX IO-Extender 150.

I/O yedijithali
Izibuko zedijithali ze-I/O zahlulwe ngokwamaqela ama-2 eechwephesha ezi-4 ezilungiselelwe umqondiso kunokutshintsha ngokuthe ngqo imithwalo. Iqela ngalinye lingaqwalaselwa njengegalelo okanye imveliso kusetyenziswa iiswitshi zediphu phakathi kwamazibuko.

• Imowudi ON = imveliso
• Imowudi OFF = igalelo

Emva kokutshintsha imo, qalisa kwakhona i-GX okanye ukhuphe iplagi kwaye uphinde uqhagamshele intambo ye-USB kumjikelezo wamandla kwisixhobo ukuze utshintsho lusebenze.
Inqaku lobuGcisa: Iziphumo zedijithali zinokukhupha i-4 mA max. Xa uqhuba i-4 mA, i-voltage ukuwisa ngapha kwe-resistor series yangaphakathi (560 Ω) yi-2,24 V, eshiya kuphela i-2,76 V @ 4 mA yomqondiso wemveliso. Ngoko ke, umqhubi ofana ne-transistor okanye i-FET kufuneka atshintshe i-relay enemveliso yedijithali.

PWM
Amazibuko e-PWM kufuneka aqhagamshelwe phakathi kwe-GND kunye nomqondiso. I-LED yesalathiso se-port ye-PWM iyakhanyiswa xa i-port ivuliwe, kwaye ubukhulu bokukhanya bubonisa isimo sangoku sexabiso lesilayidi se-PWM.

Udluliselo lweBistable (Relay 1 & 2)
I-bistable (i-latching) i-relays kwi-GX IO-Extender 150 isebenza ngokuhlukileyo kwi-monostable (non-latching) i-relays efunyenwe kwizixhobo ezifana neCerbo GX.
I-monostable relay inemeko engagqibekanga egqitywe ngocingo lwayo:

• HAYI (Evulwa Ngokuqhelekileyo): Ukulayisha KUVALIWE ngokungagqibekanga, IVULIWE xa i-relay inikwe amandla.
• I-NC (Eqhele Ukuvalwa): Umthwalo IVULIWE ngokungagqibekanga, IVILE xa udluliselo luqhutywa.

I-bistable relay ineendawo ezimbini ezizinzileyo - A kunye no-B - ezihlala zizinzileyo nangona amandla elahlekile. I-relay itshintsha phakathi kwabo nge-pulse emfutshane, ingasebenzisi mandla ukugcina nayiphi na imeko. Indawo esebenzayo iboniswa yi-LED:

• I-LED eluhlaza okwesibhakabhaka: Indawo A esebenzayo
• I-Orenji LED: Isikhundla B siyasebenza

Ex eqhelekileyoampLes

1. Ukulinganisa i-NO monostable relay
   Ukuphindaphinda impatho yesilayidi esiqhele ukuvuleka:
   • Qhagamshela umthombo wakho wamandla kwiCOM.
   • Qhagamshela umthwalo wakho kwiTheminali A.
   • Shiya iTheminali B iqhawukile.
   • Qwalasela i-relay kwimodi yokuguqula.
     Kwisikhundla A (i-LED eluhlaza okwesibhakabhaka), umthwalo unikwe amandla. Kwisikhundla B (i-orange LED), umthwalo unqanyuliwe.
     Ukuba umthwalo kufuneka UVALE emva komjikelo wamandla, seta isilayidi kwindawo B phambi kokuvalwa.
2. Ukutshintsha phakathi kwe "GREEN" kunye nezibane zesalathisi "RED" I-relay inokutshintsha amandla phakathi kweesekethe ezimbini, kwi-ex.ample:
   • I-COM iqhagamshelwe kumthombo wakho wamandla.
   • Terminal A wired to an “GREEN” indicator light.
   • Terminal B wired to an “RED” indicator light.
   • Qwalasela i-relay kwimodi yokuguqula.
     Xa ukwindawo A (blue LED), ukukhanya OKULUHLAZA kuyasebenza. Xa utshintshelwe kwindawo B (i-orange LED), ukukhanya OKUBOMVU kuyasebenza.
3. Ukusebenza okwethutyana: I-Siren kunye nokukhanya "Konke KULUNGILE" Ukusebenza okwethutyana kunye nempendulo engagqibekanga:
   • I-COM iqhagamshelwe kumthombo wakho wamandla.
   • Itheminali A enentambo kwisiren.
   • Itheminali B efakwe kwintambo kwisibane esithi “Konke KULUNGILE”.
   • Qwalasela i-relay kwimo yomzuzwana.

In its resting state (position B, orange LED), the “All OK” light is illuminated. When the momentary switch is activated, it briefly switches the relay to position A, sounding the siren. Once the momentary pulse ends, the relay returns to position B, and the “All OK” light comes back on.

Ukutshintsha okuqinileyo
Ukutshintsha okuqinileyo kwi-GX IO-Extender 150 yenzelwe ukutshintshela nge-elektroniki icala elilungileyo lesekethe ye-DC, ngaphandle koqhagamshelwano ngoomatshini.

• Bat+ → Qhagamshela kwitheminali elungileyo yebhetri yakho okanye unikezelo lwamandla lweDC.
• Layisha → Qhagamshela kwicala elilungileyo lesixhobo sakho okanye umthwalo.
• Bat- → Qhagamshela kwitheminali engalunganga yebhetri yakho okanye unikezelo lwamandla lweDC.
• Icala elibi lomthwalo wakho liqhagamshela ngqo kwiBat- (okanye umhlaba owabelwana ngawo).
• Qwalasela i-relay kwimodi yokuguqula.

Olu cwangciso luvumela i-slid-state relay ukutshintshela kunye nokuvala umthwalo wakho ngokwenza okanye ukwaphula icala elilungileyo lesekethe nge-elektroniki.
Ukuba iswitshi eqinileyo iqwalaselwe njengomzuzwana, iya kutshintsha umthwalo kuphela ixesha elide njengoko isignali yokulawula ihlala isebenza.

Isoftware
Node-RED is a low-code programming environment for event-driven applications (https://nodered.org). See the installation manual for more information on the Node-RED and GX device combination: https://www.victronenergy.com/live/venus-os:large.

La manyathelo ama-4 alandelayo ayafuneka ukufumana iNode-RED inyuke kwaye isebenze kwinkqubo yakho:

1. Seta uhlobo lomfanekiso we-firmware kuMkhulu kwaye uhlaziye i-firmware
2. Nje ukuba uqalise kwakhona kumfanekiso omkhulu, yenza i-Node-RED
3. Open the Node-RED dashboard via either VRM under the Venus OS Large menu option or locally via https://venus.local:1881/
4. Tsala i-node yolawulo yoTshintsho kunye noTshintsho kwaye ulawule i-GX IO-Extender 150. Ezi nodi ziyingxenye yephakheji ye-node-red-contrib-vitron efika ifakwe ngaphambili kunye nomfanekiso weVenus OS Omkhulu.

Ezi, kunye nezinye, umzample flows inokungeniswa ngaphandle ngeKhetho lokungeniswa ngaphakathi kweNode-RED.

Ulawulo olulula lwedijithali
Okokuqala, igalelo ledijithali kufuneka lilungiswe kuhlobo kusetyenziswa Useto > Udibaniso > Digital IO kwisixhobo se-GX, emva koko ukhethe igalelo ledijithali kwi-GX IO-Extender 150 kwaye usete uhlobo.

Iindidi zongeniso ezixhaswayo zezi:

• Imitha yokubetha akukho N/A
• Isivusi socango sivuliwe/ sivaliwe
• Impompo yeBilge Vula/Valiwe
• I-alam yeBilge Ok/Alarm
• Isivusi somqhekezo Ok/Ialam
• Ialam yomsi Ok/Alarm
• Isivusi somlilo Ok/Alarm
• CO2 alarm Kulungile/Alarm
• Ijenereyitha yokubaleka/Yeka
• Ulawulo lwegalelo lokuchukumisa

Nje ukuba kukhethwe uhlobo lwegalelo, i-Digital input node ingasetyenziselwa ukufunda ubume belo galelo ukuze isetyenziswe ngakumbi ekuhambeni.

Le example ibonisa iipulses ezifundwe kwigalelo ledijithali usebenzisa igeyiji kwideshibhodi yeNode-RED

Yandisa iPWM

Inxalenye ephezulu yale flow yeyokuvula okanye ukuvala izibuko le-PWM usebenzisa iparameter ye-PWM. Nje ukuba izibuko livulwe, liyakusebenzisa naliphi na ixabiso le-PWM elisekiweyo kusetyenziswa iparamitha yokufiphala kwe-PWM. Indawo yokufaka ifunda ixabiso langoku lezibuko le-PWM kwaye ligcina oko kumxholo we-Node-RED jikelele.
I-node yokutofa itofa amaxeshaamp umzuzwana ngamnye, ofumana indawo yexabiso langoku lePWM lezibuko, linyuswe ngo 25.

Qaphela ukuba unokufuna ukunyenyisa iSwitch esetyenzisiweyo kunye nezibuko ze-PWM kwindawo yokusebenza ukuze isebenze kuwe.

Iinkcukacha zobugcisa

I-GX IO-Extender 150
Ukubonelela ngevoltage	Ixhaswe yi-USB
Ukutya umbane	< 100 mW xa ungasebenzi, max, 1 W (< 200 mA @ 5 V)
Ukunyuka	Udonga okanye iDIN-umzila (ngokusebenzisa isincedisi-adaptha)
Uqhagamshelo lwegalelo kunye neZiphumo
I-Digital I/Os (ikwanti kwi-USB)	8 I/Os kunye LEDs ebonisa isimo, uqwalaselo njengoko 8 amagalelo, 8 iziphumo okanye 4 amagalelo + 4 iziphumo
	Izinto ezifakwayo: 3,8 – 5,5 V, Iziphumo: 5 V, 4 mA max Ii-I/Os zedijithali ziyakwazi ukuphatha umthamotages ukuya kuthi ga kwi-5,5 V. Nakuphi na ukugqithiswatage kunokubangela umonakalo osisigxina
Imveliso ye-PWM (yodwa kwi-USB)	Iitshaneli ezi-4 ezine-LED ezibonisa urhulumente Umqulutage inqanaba: 5 V, Ukuchaneka: 8 bits @ 1,5625 kHz
I-Latching relays (inokwenzeka simahla)	I-2x latching relays (i-bi-stable) ene-LEDs ebonisa urhulumente
	Ukalo loqhagamshelwano (umthwalo oxhathisayo): DC: 3 A @ 30 V, 1 A @ 60 V, 0,3 A @ 220 V (90 W max) AC: 2 A @ 60 V, 1 A @ 125 V, 0,5 A @ 250 V (125VA max)
Ukutshintshela okuqinileyo (kwakwanti kwi-USB)	Ubuninzi bebhetri voltage:	70 VDC
	Ubungakanani bomthwalo wangoku:	4 A
	Umthamo omkhulu womthwalo:	Vbat ukuya kuthi ga kwi-15 V: 1000 µF 15 V < Vbat < 30 V: 400 µF 30 V < Vbat < 70 V: 50 µF
	Ubungakanani bomthwalo owenziweyo:	Ukuya kuthi ga kwi-1 A: 1000 mH 1 A < | < 2 A: 100 mH Ngaphezulu kwe-2 A: 10 mH
Imilinganiselo
Imilinganiselo yangaphandle (hxwxd)	123 x 67 x 23 mm
Ubunzima	0,170 kg
Uluhlu lobushushu obusebenzayo	-20 °C ukuya +50 °C

Isihlomelo

Iindlela zokulawula ezifumanekayo
The device announces itself under the dbus service com.victronenergy.switch.<serial> and exposes the paths as described in this appendix. Check https://github.com/victronenergy/venus/wiki/dbus#switch for the meaning and usage of any additional paths.

Iingeniso zeDijithali
Amagalelo edijithali kufuneka adityaniswe nomsebenzi kuqala, phambi kokuba ukwazi ukuwasebenzisa. Oku kufuneka kwenziwe kwi-console njengoko kuchaziwe ngasentla.

Seta uhlobo lwegalelo ledijithali nge

• 0 = Kukhubazekile
• 1 = Ukubetha kwemitha
• 2 = Umnyango
• 3 = Impompo yamanzi
• 4 = I-Alarm yeBilge
• 5 = IAlarm yeBurglar
• 6 = IAlam yomsi
• 7 = IAlam yomlilo
• I-8 = I-Alam ye-CO2
• 9 = Ijenereyitha

Iindlela zePulsemeter
/Bala: inani lemiphunga ebaliwe

Iindlela zongeniso zedijithali
/Ilizwe: Imeko yegalelo

Iziphumo zeDijithali
Qaphela ukuba ezi ndlela ziya kubakho kuphela xa i-IO ehambelanayo imiselwe kwimveliso (kunye neeswitshi ze-DIP).

• /SwitchableOutput/output_1/State (0=Cima, 1=Vuliwe)
• /SwitchableOutput/output_2/State (0=Cima, 1=Vuliwe)
• /SwitchableOutput/output_3/State (0=Cima, 1=Vuliwe)
• /SwitchableOutput/output_4/State (0=Cima, 1=Vuliwe)
• /SwitchableOutput/output_5/State (0=Cima, 1=Vuliwe)
• /SwitchableOutput/output_6/State (0=Cima, 1=Vuliwe)
• /SwitchableOutput/output_7/State (0=Cima, 1=Vuliwe)
• /SwitchableOutput/output_8/State (0=Cima, 1=Vuliwe)

Iziphumo zePWM

• /SwitchableOutput/pwm_1/State (0=Cima, 1=Vuliwe)
• /SwitchableOutput/pwm_1/Dimming (ixabiso elipheleleyo ukusuka ku-0-100, elimele ipesentitage)
• /SwitchableOutput/pwm_2/State (0=Cima, 1=Vuliwe)
• /SwitchableOutput/pwm_2/Dimming (ixabiso elipheleleyo ukusuka ku-0-100, elimele ipesentitage)
• /SwitchableOutput/pwm_3/State (0=Cima, 1=Vuliwe)
• /SwitchableOutput/pwm_3/Dimming (ixabiso elipheleleyo ukusuka ku-0-100, elimele ipesentitage)
• /SwitchableOutput/pwm_4/State (0=Cima, 1=Vuliwe)
• /SwitchableOutput/pwm_4/Dimming (ixabiso elipheleleyo ukusuka ku-0-100, elimele ipesentitage)

Ukudlulisa Iziphumo

• /SwitchableOutput/relay_1/State (0=Cima, 1=Vuliwe) – Udluliselo oluzinzile kabini 0 = A, 1 = B
• /SwitchableOutput/relay_2/State (0=Cima, 1=Vuliwe) – Udluliselo oluzinzile kabini 0 = A, 1 = B
• /SwitchableOutput/relay_3/State (0=Valiwe, 1=Vuliwe) – Imo yokutshintsha okuqinileyo

Ubungakanani bendawo ebiyelweyo

Amaxwebhu / Izibonelelo

victron energy GX IO-Extender 150 Enhanced Input and Output For GX Devices [pdf] Isikhokelo somsebenzisi GX IO-Extender 150, GX IO-Extender 150 Enhanced Input and Output For GX Devices, Enhanced Input and Output For GX Devices, Input and Output For GX Devices, Output For GX Devices, GX Devices

Iimbekiselo

• Incwadi yokusebenzisa