I-Unitronics US5-B5-B1 Yakhelwe-Ngaphakathi UniStream Isilawuli seNgcaciso yeNkqubo

Esi sikhokelo sibonelela ngofakelo olusisiseko kunye neenkcukacha zobugcisa kwiimodeli ze-UniStream® ezidweliswe ngasentla.

Iimpawu ngokubanzi

• I-Unitronics 'UniStream® eyakhelwe-ngaphakathi uchungechunge yi-PLC + HMI All-in-One abalawuli abacwangcisekileyo ababandakanya i-CPU eyakhelwe-ngaphakathi, ipaneli ye-HMI, kunye ne-I / Os eyakhelwe ngaphakathi.
• Olu ngcelele lufumaneka kwiinguqulelo ezimbini: I-UniStream eyakhelwe-ngaphakathi kunye ne-UniStream eyakhelwe-ngaphakathi yePro.

Qaphela ukuba inombolo yemodeli ebandakanya:

• I-B5/C5 ibhekisa kwi-UniStream eyakhelwe-ngaphakathi
• I-B10/C10 ibhekisa kwi-UniStream eyakhelwe-ngaphakathi yePro. Ezi modeli zibonelela ngeempawu ezongezelelweyo, ezichazwe ngezantsi.

Iimpawu ngokubanzi
HMI	§ Izikrini zoMbala ezichasayo § Ithala leencwadi lemizobo elityebileyo loyilo lweHMI
Iimpawu zaMandla	§ Iindlela ezakhelwe-ngaphakathi kunye neeGauji, i-PID eguqulelwe ngokuzenzekelayo, iitafile zedatha, idatha yedathaampling, kunye Iiresiphi § Ii-UniApps™: Ukufikelela kwaye uhlele idatha, ukubeka iliso, ukulungisa iingxaki kunye nokulungisa iimpazamo kunye nokunye- nge-HMI okanye ukude ngeVNC § Ukhuseleko: Ukhuseleko lwamanqanaba amaninzi § Iialamu: Inkqubo eyakhelwe-ngaphakathi, imigangatho ye-ANSI / ISA
I/O Iinketho	§ Ukucwangciswa kwe-I / O eyakhelwe ngaphakathi, iyahluka ngokwemodeli § I/O yasekuhlaleni nge-UAG-CX uthotho lweeadaptha zokwandiswa kwe-I/O kunye neemodyuli eziqhelekileyo ze-UniStream Uni-I/O™ § I-I / O ekude usebenzisa i-UniStream Remote I / O okanye nge-EX-RC1 § US15 kuphela - Dibanisa i-I/O kwisixokelelwano sakho ngokusebenzisa i-UAG-BACK-IOADP, cofa kwindawo yolawulo ukuze kuqwalaselwe konke-kwinye
COM Iinketho	§ Izibuko ezakhelwe ngaphakathi: I-1 Ethernet, i-1 USB host, i-1 Mini-B yesixhobo se-USB port (i-USB-C kwi-US15) § Uthotho kunye namazibuko e-CANbus anokongezwa ngeemodyuli ze-UAC-CX
COM Imigaqo-nkqubo	§ Fieldbus: CANopen, CAN Layer2, MODBUS, EtherCAT (iimodeli ze-US15 kuphela), i-EtherNetIP kunye nokunye. Phumeza naluphi na uthotho lwe RS232/485, TCP/IP, okanye CANbus iprothokholi yomntu wesithathu ngoMqambi woMyalezo § I-Advanced: I-SNMP Agent / Trap, i-imeyile, i-SMS, imodem, i-GPRS / GSM, i-VNC Client, i-FTP Server / Client, i-MQTT, i-REST API, iTelegram, njl.
Inkqubo yesoftware	Isoftware ye-All-in-One yoqwalaselo lwehardware, unxibelelwano, kunye nezicelo ze-HMI / PLC, ezifumaneka njengokukhuphela mahala kwi-Unitronics.
Itheyibhile yokuthelekisa	Uphawu	B5/C5	B10/C10 (Pro)
	Imemori yeNkqubo	3GB	6GB
	Jack Audio	Hayi	Ewe
	Ividiyo/Inkxaso ye-RSTP	Hayi	Ewe
	Web Iseva	Hayi	Ewe
	SQL Client	Hayi	Ewe

Ngaphambi kokuba Uqale

Ngaphambi kokufaka isixhobo, umsebenzisi kufuneka:
Funda kwaye uqonde olu xwebhu.

• Qinisekisa imixholo yeKit.
• Iimpawu zesilumkiso kunye nezithintelo ngokubanzi

Xa kukho naziphi na iisimboli zilandelayo zivelayo, funda ulwazi olunxulumeneyo ngononophelo.

Uphawu	Intsingiselo	Inkcazo
	Ingozi	Ingozi echongiweyo ibangela umonakalo emzimbeni kunye nepropathi.
	Isilumkiso	Ingozi echongiweyo inokubangela umonakalo emzimbeni kunye nepropathi.
Isilumkiso	Isilumkiso	Lumka.

• Zonke exampIiles kunye nemizobo ibonelelwe ukunceda ukuqonda kwaye ayiqinisekisi ukusebenza. Unitronics akamkeli uxanduva ukusetyenziswa kanye le mveliso ngokusekelwe kwezi examples.
• Nceda ulahle le mveliso ngokwemigangatho nemimiselo yasekhaya neyesizwe.
• Le mveliso kufuneka ifakwe kuphela ngabasebenzi abaqeqeshiweyo.
• Ukuba isixhobo sisetyenziswe ngendlela engachazwanga ngumenzi, ukhuseleko olunikezelwa sisixhobo lunokonakala.
• Ukungaphumeleli ukuthobela izikhokelo zokhuseleko ezifanelekileyo kunokubangela ukulimala kakhulu okanye umonakalo wepropati.
• Musa ukuzama ukusebenzisa esi sixhobo ngeeparamitha ezidlula imigangatho evumelekileyo.
• Musa ukuqhagamshela/uqhawule uqhagamshelwano xa umbane uvuliwe.

Ukuqwalaselwa kokusingqongileyo 

• Ukungenisa umoya: Isithuba se-10mm siyafuneka phakathi komphetho wesixhobo ongaphezulu/osezantsi kunye neendonga zoluvalo
• Musa ukufaka kwiindawo ezinothuli olugqithisileyo okanye oluqhubekileyo, igesi edlayo okanye enokutsha, ukufuma okanye imvula, ubushushu obugqithisileyo, ukothuka okubangelwa rhoqo okanye ukungcangcazela okugqithisileyo, ngokuhambelana nemigangatho kunye nemida enikwe kwiphepha lenkcazo yobugcisa bemveliso.
• Musa ukuntywilisela iyunithi emanzini okanye uvumele amanzi ukuba avuzele kuyo.
• Musa ukuvumela i-debris iwele ngaphakathi kwiyunithi ngexesha lofakelo.
• Faka iyunithi kangangoko kunokwenzeka ukusuka high-voltagiintambo kunye nezixhobo zombane.

Ukuthotyelwa kwe-UL

• Eli candelo lilandelayo lifanelekile kwiimveliso ze-Unitronics ezidweliswe kunye ne-UL.
• Le mifuziselo ilandelayo zidweliselwe iiNdawo ezinobungozi: US5-B5-B1, US5-B10-B1, US7-B5-B1 kunye ne-US7-B10-B1

Le mifuziselo ilandelayo zidweliswe kwiNdawo eQhelekileyo:

• I-USL ilandelwa ngu-, ilandelwa ngu-050 okanye 070 okanye 101, ilandelwe ngu-B05
• I-US ilandelwa ngu-5 okanye 7 okanye 10, ilandelwa ngu-, ilandelwa ngu-B5 okanye i-B10 okanye i-C5 okanye i-C10, ilandelwa ngu-, ilandelwa ngu-B1 okanye i-TR22 okanye i-T24 okanye i-RA28 okanye i-TA30 okanye i-R38 okanye i-T42

Iimodeli ezivela kuthotho lwe-US5, i-US7 kunye ne-US10 ezibandakanya "i-T10" okanye "i-T5" kwigama lemodeli zifanelekile ukunyuswa kwindawo ethe tyaba yohlobo lwe-4X ebiyelweyo. Umzekeloamples: US7-T10-B1, US7-T5-R38, US5-T10-RA22 and US5-T5-T42.

UL Indawo eqhelekileyo

Ukuze kuhlangatyezwane nemigangatho yendawo yesiqhelo ye-UL, indawo yolawulo nyusa esi sixhobo kumphezulu osicaba woHlobo loku-1 okanye oluvaliweyo lwe-4X.

Imilinganiselo ye-UL, abalawuli abaCwangcisiweyo abaSebenzisa kwiiNdawo ezinobungozi, iKlasi I, iCandelo 2, Amaqela A, B, C kunye no-D
La maNqaku oKhupho anxulumene nazo zonke iimveliso ze-Unitronics ezineempawu ze-UL ezisetyenziselwa ukuphawula iimveliso ezivunyiweyo ukuba zisetyenziswe kwiindawo ezinobungozi, iKlasi yoku-I, iCandelo lesi-2, iQela A, B, C kunye no-D.

Isilumkiso: Esi sixhobo sifanelekile ukusetyenziswa kwiKlasi yoku-I, iCandelo lesi-2, amaQela A, B, C kunye no-D, okanye iindawo ezingezizo ezinobungozi kuphela.

• I-input kunye ne-output wiring kufuneka ihambelane neKlasi I, iCandelo le-2 iindlela zocingo kunye nokuhambelana negunya elinegunya.
• ISILUMKISO—Ingozi yokuqhambuka—ukutshintshwa kwamalungu kunokuphazamisa ukufaneleka koKlasi I, iCandelo lesi-2.
• ISILUMKISO – INGOZI YOKUQHUBEKA – Musa ukudibanisa okanye ukuqhawula isixhobo ngaphandle kokuba umbane ucinyiwe okanye indawo yaziwa ngokuba ayinabungozi.
• ISILUMKISO - Ukuvezwa kwezinye iikhemikhali kunokuthoba iimpawu zokutywina zemathiriyeli esetyenziswa kwiiRelay.
• Esi sixhobo kufuneka sifakwe kusetyenziswa iindlela zocingo njengoko zifuneka kwiKlasi I, iCandelo 2 ngokwe-NEC kunye / okanye i-CEC.

Iphaneli-yokunyuswa
Kubalawuli abacwangciswayo abanokunyuswa nakwindawo yolawulo, ukuze bahlangabezane nomgangatho we-UL Haz Loc, indawo yolawulo-nyusa esi sixhobo kumphezulu osicaba woHlobo loku-1 okanye izivalo zoHlobo lwe-4X.

Unxibelelwano kunye nokugcinwa kweMemori eSukayo
Xa iimveliso ziquka nokuba yi-USB yonxibelelwano port, SD card slot, okanye zombini, hayi i-SD card slot okanye i-USB port ayijoliswanga ukuba iqhagamshelwe ngokusisigxina, ngelixa i-USB port yenzelwe inkqubo kuphela.

Ukususa / Ukutshintsha ibhetri
Xa imveliso ifakelwe ibhetri, musa ukuyisusa okanye uyibuyisele endaweni yebhetri ngaphandle kokuba umbane ucinyiwe, okanye indawo leyo yaziwa ngokuba ayinabungozi. Nceda uqaphele ukuba kucetyiswa ukuba ugcine yonke idatha egcinwe kwi-RAM, ukuze ugweme ukulahlekelwa idatha xa utshintsha ibhetri ngelixa umbane ucinyiwe. Ulwazi lomhla kunye nexesha luya kufuneka lusetwe ngokutsha emva kwenkqubo.

Imixholo yeKit

• 1 PLC + HMI isilawuli
• 4,8,10 izibiyeli zokukhwela (US5/US7, US10, US15)
• 1 ipaneli yokufaka isitywina
• Iiphaneli ezi-2 ezixhasayo (US7/US10/US15 kuphela)
• Ibhloko yeterminal yamandla e-1
• Iibhloko ze-terminal ezi-2 ze-I/O (ezibonelelwe kuphela ngeemodeli ezibandakanya i-I/Os eyakhelweyo)
• 1 Ibhetri

Umzobo weMveliso

Ngaphambili nangasemva View 

1	Ukukhuselwa kweSkrini	Iphepha leplastiki elincanyathiselwe kwiscreen sokukhusela. Yisuse ngexesha lofakelo lwePhaneli yeHMI.
2	Ikhava yebhetri	Ibhetri inikwe kunye neyunithi kodwa kufuneka ifakwe ngumsebenzisi.
3	Igalelo loBonelelo lwaMandla	Indawo yodibaniso yomthombo wamandla omlawuli. Qhagamshela iBhlokhi yeSiteminali enikezelweyo kunye nekhithi ukuya ekupheleni kwentambo yombane.
4	MicroSD slot	Ixhasa amakhadi e-microSD asemgangathweni.
5	Izibuko le-USB	Ibonelela ngojongano lwezixhobo ze-USB zangaphandle.
6	Ethernet Port	Ixhasa unxibelelwano lwe-Ethernet olukhawulezayo.
7	Isixhobo se-USB	Sebenzisa ukhuphelo lwesicelo kunye nonxibelelwano oluthe ngqo lwePC-UniStream.
8	I/O Ukwandiswa Jack	Indawo yoQhagamshelwano lwe-I/O yoKwandiswa kweZibuko. Amazibuko abonelelwa njengenxalenye ye-I/O yeeKhithi zeModeli yoKwandiswa. Iikhithi ziyafumaneka ngeodolo eyahlukileyo. Qaphela ukuba i-UniStream® I-Built-in ihambelana kuphela neeadaptha ezivela kuthotho lwe-UAG-CX.
9	Jack Audio	Iimodeli zePro kuphela. Le 3.5mm Audio Jack yenza ukuba uqhagamshele izixhobo zomsindo zangaphandle.
10	I/O eyakhelweyo	Imodeli-exhomekeke. Nikeza kwiimodeli ezinolungelelwaniso lwe-I/O olwakhelwe ngaphakathi.
11	Uni-COM™ CX yemodyuli kaJack	Indawo yoqhagamshelwano ukuya kuthi ga kwiimodyuli ze-stack-COM ezi-3. Ezi zifumaneka ngeodolo eyahlukileyo.
12	UAG-BACK-IOADP Iadaptha Jack	Indawo yokudibanisa kwi-UAG-BACK-IO-ADP Jack. Iadaptha ifumaneka ngeodolo eyahlukileyo.

Iingqwalasela zeNdawo yokuFakela

Yabela indawo: 

• umlawuli
• naziphi na iimodyuli eziza kufakwa
• ukufikelela kumazibuko, iijacks, kunye ne-slot yekhadi le-microSD

Ngemilinganiselo echanekileyo, nceda ubhekisele kwiMilinganiselo yoomatshini eboniswe ngezantsi.

Imilinganiselo yoomatshini

PHAWULA
Vumela isithuba seemodyuli ukuba zithathwe ngasemva komlawuli, ukuba zifunwa sisicelo sakho. Iimodyuli ziyafumaneka ngeodolo eyahlukileyo.

Ukunyuka kwePaneli

PHAWULA 

• Ubukhulu bephaneli yokuxhoma kufuneka bube ngaphantsi okanye bulingane no-5mm (0.2”).
• Qinisekisa ukuba imiba yeendawo iyahlangatyezwa.

1. Lungiselela i-panel cut-out ngokwemilinganiselo njengoko kubonisiwe kwicandelo langaphambili.
2. Slayida isilawuli kwindawo yokusika, uqinisekise ukuba iPhaneli yokuFaka iTywina isendaweni njengoko kubonisiwe ngezantsi.
3. Tyhila izibiyeli zokuxhoma kwiindawo zokubeka kumacala ephaneli njengoko kubonisiwe ngezantsi.
4. Qinisa izikrufu zesibiyeli kwindawo yolawulo. Bamba izibiyeli ngokukhuselekileyo ngokuchasene neyunithi ngelixa uqinisa izikrufu. I-torque efunekayo yi-0.6 N · m (5 in-lb).

Xa ixhonywe ngokufanelekileyo, indawo yolawulo ime ngokulinganayo kwiqela lenjongo elisikiweyo njengoko kubonisiwe ngezantsi.

Isilumkiso: Musa ukusebenzisa i-torque engaphezu kwe-0.6 N·m (5 in-lb) yetorque ukuqinisa izikrufu zezibiyeli. Ukusebenzisa amandla amaninzi ukuqinisa isikrufu kungonakalisa le mveliso.

Ibhetri: Ugcino, usetyenziso lokuqala, uFakelo, kunye noTshintsho

Back-up
Ukuze kugcinwe amaxabiso okugcina amaxabiso e-RTC kunye nedatha yenkqubo kwimeko yokucima kombane, ibhetri kufuneka iqhagamshelwe.

Ukusetyenziswa kokuqala

• Ibhetri ikhuselwe sisigqubuthelo esisuswayo kwicala lesilawuli.
• Ibhetri iza ifakwe ngaphambili ngaphakathi kwiyunithi kunye nethebhu yeplastiki ethintela uqhagamshelwano. Le thebhu kufuneka isuswe ngumsebenzisi ngaphambi kokusetyenziswa.

Ukufakwa kwebhetri kunye nokuBekwa kwakhona
Sebenzisa izilumkiso ezifanelekileyo ukukhusela i-Electro-Static Discharge (ESD) ngelixa ulungisa ibhetri.

Isilumkiso 

• Ukugcina amaxabiso ogcino lwe-RTC kunye nedatha yenkqubo ngexesha lokutshintshwa kwebhetri, umlawuli kufuneka anikwe amandla.
• Qaphela ukuba ukuqhawula ibhetri kumisa ugcino lwamaxabiso ogcino kwaye kubangele ukuba acinywe.

1. Susa isiciko sebhetri kwisilawuli njengoko kubonisiwe kumfanekiso ohamba neli phepha:
   • Cinezela isithuba kwimodyuli ukuyikhupha.
   • Yislayide phezulu ukuze uyisuse.
2. Ukuba utshintsha ibhetri, susa ibhetri kwindawo yayo ecaleni lomlawuli.
3. Faka ibhetri, uqinisekise ukuba i-polarity ihambelana nokumakishwa kwe-polarity njengoko kubonisiwe kumfanekiso ohamba kunye.
4. Buyisela isigqubuthelo sebhetri.
5. Lahla ibhetri esele isetyenzisiwe ngokwemigangatho nemimiselo yasekhaya neyesizwe.

Iintambo

• Esi sixhobo senzelwe ukusebenza kuphela kwi-SELV/PELV/Class 2/Limited Power environments.
• Zonke izixhobo zombane kwinkqubo kufuneka zibandakanye ukugquma kabini. Iziphumo zonikezelo lwamandla kufuneka zilinganiswe njenge-SELV/PELV/Class 2/Limited Power.
• Sukuqhagamshela nokuba yi-'Neutral' okanye 'Layini' isignali ye-110/220VAC kwindawo ye-0V yesixhobo.
• Musa ukubamba iingcingo eziphilayo.
• Yonke imisebenzi yokufaka iintambo kufuneka yenziwe ngelixa umbane LUVALIWE.
• Sebenzisa ukhuseleko lwangoku, olufana ne-fuse okanye i-breaker circuit, ukunqanda imisinga egqithisileyo kwindawo yokudityaniswa kombane.
• Amanqaku angasetyenziswanga akufanele adityaniswe (ngaphandle kokuba kuchazwe ngenye indlela). Ukungawuhoyi lo myalelo kungonakalisa isixhobo.
• Jonga kwakhona zonke iintambo phambi kokuba uvule unikezelo lombane.

Isilumkiso 

• Musa ukusebenzisa itoti, i-solder, okanye nayiphi na into kucingo olukhutshiweyo olunokubangela ukuba umsonto wocingo uqhawuke.
• Iingcingo kunye nentambo kufuneka zibe neqondo lobushushu elingaphantsi kwama-75°C.
• Faka kumgama ophezulu ukusuka kwivolthi ephezulutagiintambo kunye nezixhobo zombane.

Inkqubo yocingo
Sebenzisa iitheminali zecrimp kwi-wiring; sebenzisa i-26-12 AWG ucingo (0.13 mm2 -3.31 mm2)

1. Hlubula ucingo ukuya kubude be-7±0.5mm (0.250-0.300 intshi).
2. Khulula i-terminal ukuya kwindawo yayo ebanzi phambi kokufaka ucingo.
3. Faka ucingo ngokupheleleyo kwi-terminal ukuqinisekisa uqhagamshelo olufanelekileyo.
4. Qinisa ngokwaneleyo ukugcina ucingo lungatsali lukhululekile.

Izikhokelo zocingo
Ukuqinisekisa ukuba isixhobo siya kusebenza ngokufanelekileyo kwaye sithintele ukuphazamiseka kwe-electromagnetic:

• Sebenzisa ikhabhinethi yentsimbi. Qinisekisa ukuba ikhabhinethi kunye neengcango zayo zinomhlaba ngokufanelekileyo.
• Sebenzisa iingcingo ezinobungakanani obufanelekileyo bomthwalo.
• Sebenzisa iintambo ezijijekileyo ezikhuselekileyo zocingo oluPhezulu kunye neempawu ze-Analog I/O.
• Kuyo nayiphi na imeko, musa ukusebenzisa ikhaka lentambo njengophawu oluqhelekileyo / indlela yokubuya.
• Hambisa umqondiso we-I/O nganye ngocingo oluzinikeleyo oluqhelekileyo. Xhuma iingcingo eziqhelekileyo kwiindawo zazo eziqhelekileyo (CM) kumlawuli.
• Ngokukodwa qhagamshela indawo nganye ye-0V kunye nendawo nganye eqhelekileyo (CM) kwisistim ukuya kumbane we-terminal ye-0V, ngaphandle kokuba kuchazwe ngenye indlela.
• Ngomntu ngamnye udibanise indawo esebenzayo yomhlaba () kumhlaba wenkqubo (ngokukhethekileyo kwi-chassis yekhabhinethi yesinyithi). Sebenzisa ezona ngcingo zimfutshane nezingqindilili kangangoko kunokwenzeka: ngaphantsi kwe-1m (3.3') ngobude, ubukhulu obuncinane yi-14 AWG (2 mm2).
• Qhagamshela unikezelo lwamandla 0V kumhlaba wenkqubo.
• Ukwenza ikhuselo leentambo:
  • Xhuma i-cable shield kumhlaba wenkqubo (ngokukhethekileyo kwi-chassis yekhabhinethi yensimbi). Qaphela ukuba isikhuselo kufuneka sidibaniswe kuphela ekupheleni kwentambo; kucetyiswa emhlabeni ikhaka kwicala le-PLC.
  • Gcina uqhagamshelo lwekhaka lufutshane kangangoko.
  • Qinisekisa ukuqhubekeka kwekhaka xa usandisa iintambo ezikhuselekileyo.

Ukufakela iNgcaciso yoMbane
Umlawuli ufuna unikezelo lwangaphandle lwamandla.

Kwimeko yomqulutage ukuguquguquka okanye ukungahambelani nomqulutage iinkcukacha zonikezelo lwamandla, qhagamshela isixhobo kunikezelo lwamandla olulawulwayo. Qhagamshela iitheminali ze-+V kunye ne-0V njengoko kubonisiwe kumzobo ohamba nalo.

Ukuqhagamshela amazibuko 

• I-Ethernet
  Intambo ye-CAT-5e ekhuselekileyo ene-RJ45 isinxibelelanisi
• Isixhobo se-USB
  Intambo ye-USB eqhelekileyo ene-Mini-B yeplagi ye-USB (iplagi ye-USC-C kwi-US15)
• Umamkeli we-USB
  Isixhobo se-USB esisemgangathweni esinoHlobo lweplagi
• Ukuqhagamshela iAudio
  • Ukuphuma ngaphandle kweaudio
    Sebenzisa iplagi ye-audio ye-stereo eyi-3.5mm enentambo yomsindo ekhuselweyo.Qaphela ukuba ziimodeli zePro kuphela ezixhasa olu phawu.
  • I-Audio Pinout
    1. I-headphone ishiywe ngaphandle (Ingcebiso)
    2. I-Headphone ekunene ngaphandle (Ring
    3. Umhlaba (Ring
    4. Musa ukudibanisa (Imikhono)

Qaphela ukuba oonobumba "xx" kwiinombolo zemodeli babonisa ukuba icandelo lisebenza kuzo zombini iimodeli ze-B5/C5 kunye ne-B10/C10.

• US5 -xx-TR22, US5-xx-T24 US7-xx-TR22, US7-xx-T24
• US10 -xx-TR22, US10-xx-T24 I/O Amanqaku oQhagamshelwano

Ii-IO zale mizekelo zicwangciswe ngamaqela amabini aneshumi elinesihlanu ngalinye, njengoko kuboniswe kumanani asekunene.

• Iqela eliphezulu
  Amanqaku oqhagamshelwano
• Iqela elisezantsi

Amanqaku oqhagamshelwano lwemveliso
Umsebenzi wee-I/O ezithile unokulungiswa ngokusetyenziswa kweengcingo kunye nezicwangciso zesoftware.

Ukufakela ii-Inputs zeDijithali
Onke amagalelo edijithali ali-10 abelana ngenqaku elifanayo CM0. Amagalelo edijithali asenokudityaniswa njenge-sink okanye umthombo.

PHAWULA
Sebenzisa i-sink input wiring ukudibanisa isixhobo sokukhangela (pnp). Sebenzisa umthombo wokufakwa kweengcingo ukuqhagamshela isixhobo esizikayo (npn).

Ukufakela ii-Inputs ze-Analog
Omabini amagalelo abelana ngenqaku elifanayo CM1.

PHAWULA

• Amagalelo awawodwa.
• Igalelo ngalinye linika iindlela ezimbini: voltage okanye okwangoku. Unokuseta igalelo ngalinye ngokuzimeleyo.
• Imowudi igqitywe lubumbeko lwehardware ngaphakathi kwenkqubo yesoftware.
• Qaphela ukuba, umzekeloampLe, ufaka igalelo kwimiba yangoku, kufuneka uphinde uyibeke ibe yangoku kwisicelo sesoftware.

Ukufakwa kweeNcingo kwiZiphumo zoRelay (US5 -xx-TR22, US7-xx-TR22, US10-xx-TR22)
Ukunqanda umngcipheko womlilo okanye umonakalo wepropathi, soloko usebenzisa umthombo wangoku oqingqiweyo okanye uqhagamshele isixhobo sangoku sokunciphisa uthotho kunye nabafowunelwa belayidi.

Iziphumo zokudluliselwa zicwangciswe ngokwamaqela amabini awodwa:

• O0-O3 ukwabelana imbuyekezo eqhelekileyo CM2.
• O4-O7 ukwabelana imbuyekezo eqhelekileyo CM3.

Ukwandiswa koQhagamshelwano lweSithuba soBomi
Ukwandisa ubude bobomi babafowunelwa bokudluliselwa kunye nokukhusela umlawuli kumonakalo onokuthi ubekho nge-EMF ebuyela umva, qhagamshela:

• a clampukudibanisa idiode ngokunxuseneyo nomthwalo ngamnye we-DC osebenzayo,
• isekethe ye-RC snubber ngokunxuseneyo nomthwalo ngamnye we-AC inductive

Ukufakwa kweeNcingo kwiSink Transistor Outputs (US5-xx-TR22, US7-xx-TR22, US10-xx-TR22)

• Qhagamshela isixhobo sangoku sokukhawulela kuthotho kunye neziphumo ze-O8 kunye ne-O9. Ezi ziphumo azikhuselwanga ngokukhawuleza.
• Iziphumo ze-O8 kunye ne-O9 zinokucwangciswa ngokuzimeleyo njengeziphumo eziqhelekileyo zedijithali okanye njengeziphumo ze-PWM ezinesantya esiphezulu.
• Iziphumo ze-O8 kunye ne-O9 zabelana ngenqaku elifanayo CM4.

Ukufakwa kweeNcingo zoMthombo weZiphumo zeTransistor (US5-xx-T24, US7-xx-T24, US10-xx-T24)

• Unikezelo lwamandla ophumayo
  Ukusetyenziswa kwazo naziphi na iziphumo kufuna unikezelo lwamandla lwangaphandle lwe-24VDC njengoko kubonisiwe kumzobo ohamba kunye.
• Iziphumo
  Qhagamshela iitheminali ze-+VO kunye ne-0VO njengoko kubonisiwe kumzobo ohamba kunye. O0-O11 isabelo imbuyekezo eqhelekileyo 0VO.

Kuhlohlwa iimodyuli ze-Uni-I/O™ kunye ne-Uni-COM™
Jonga kwiziKhokelo zokuFakelo ezibonelelwe ngezi modyuli.

• Cima amandla enkqubo phambi kokudibanisa okanye ukuqhawula nayiphi na iminqongo okanye izixhobo.
• Sebenzisa izilumkiso ezifanelekileyo ukukhusela i-Electro-Static Discharge (ESD).

Ukukhupha isiLawuli

1. Susa unikezelo lombane.
2. Susa zonke iintambo kwaye uqhawule naziphi na izixhobo ezifakiweyo ngokwesikhokelo sofakelo sesixhobo.
3. Khulula kwaye ususe izibiyeli zokukhwela, unakekele ukuxhasa isixhobo ukusithintela ukuba singawi ngexesha lale nkqubo.

• Ulwazi olukolu xwebhu lubonisa iimveliso ngomhla wokushicilela. I-Unitronics inelungelo, ngokuxhomekeke kuyo yonke imithetho esebenzayo, nangaliphi na ixesha, ngokubona kwayo, kwaye ngaphandle kwesaziso, ukuyeka okanye ukutshintsha iimpawu, ukuyila, izixhobo kunye nezinye iinkcukacha zeemveliso zayo, kwaye mhlawumbi ngokusisigxina okanye okwethutyana Ukushiya kwimarike.
• Lonke ulwazi kolu xwebhu lunikelwe “njengoko lunjalo” ngaphandle kwewaranti yalo naluphi na uhlobo, nokuba ichaziwe okanye ichaziwe, kuquka kodwa ingaphelelanga kuzo naziphi na iziqinisekiso ezichaziweyo zokurhwebelana, ukufaneleka kwenjongo ethile, okanye ukungophulwa komthetho. I-Unitronics ayithathi xanduva ngeempazamo okanye ukushiyeka kulwazi olunikwe kolu xwebhu. Akukho siganeko siya kuba noxanduva lwawo nawuphi na umonakalo okhethekileyo, ongalindelekanga, ongathanga ngqo okanye olandelelweyo walo naluphi na uhlobo, okanye nawuphina umonakalo onokuthi uvele ngenxa okanye ngokunxulumene nokusetyenziswa okanye ukwenziwa kolu lwazi.
• Amagama orhwebo, iimpawu zentengiso, iilogo kunye neempawu zenkonzo ezithiwe thaca kolu xwebhu, kubandakanywa noyilo lwazo, ziyipropathi ye-Unitronics (1989) (R”G) Ltd. okanye amanye amaqela esithathu kwaye akuvumelekanga ukuzisebenzisa ngaphandle kwemvume ebhaliweyo kwangaphambili. yeUnitronics okanye umntu wesithathu onokuba ngabanini bazo

IiNgcaciso zobuGcisa

• I-Unitronics 'UniStream® eyakhelwe-ngaphakathi uthotho PLC+HMI All-in-One abalawuli programmable.
• I-UniStream iqhagamshela ngqo kwi-UniCloud, iqonga lelifu le-Unitronics 'IIoT isebenzisa uqhagamshelo lwe-UniCloud eyakhelweyo. Ulwazi oluninzi malunga ne-UniCloud luyafumaneka www.unitronics.cloud.

Amanani omzekelo kolu xwebhu 

• Akukho I/Os eyakhelweyo
• I-10 x amagalelo eDijithali, i-24VDC, isinki / umthombo
• 2 x amagalelo eAnalog, 0÷10V / 0÷20mA, 12 bits
• I-2 x Iziphumo zeTransistor, i-npn, kuquka i-2 Isantya esiphezulu se-PWM iziteshi zokuphuma
• 8 x iziphumo zokudluliselwa
• I-10 x amagalelo eDijithali, i-24VDC, isinki / umthombo
• 2 x amagalelo eAnalog, 0÷10V / 0÷20mA, 12 bits
• I-12 x Iziphumo ze-Transistor, i-pnp, kuquka i-2 ye-PWM yokukhupha iziteshi

Umgangatho
I-Pro, inikezela ngeempawu ezongezelelweyo, ezichazwe ngezantsi

Ngokusebenza okunikwe amandla kwe-UniCloud
Ngokwakhelwa-ngaphakathi kweminyaka emi-5 yokubhalisa kwe-UniCloud ngaphandle kwentlawulo eyongezelelweyo efunekayo ngeli xesha.

• 5” 800×480 (WVGA) bonisa
• 7” 800×480 (WVGA) bonisa
• 10.1” 1024×600 (WSVGA) bonisa
• 15.6” 1366 x 768 (HD).

Izikhokelo zoFakelo ziyafumaneka kwiThala leencwadi lobuGcisa le-Unitronics www.unitronicsplc.com.

Ukunikezwa Amandla		I-USx-xx-B1	USx-xx-TR22	USx-xx-T24
Igalelo voltage		12VDC okanye 24VDC	24VDC	24VDC
Uluhlu oluvumelekileyo		I-10.2VDC ukuya kwi-28.8VDC	I-20.4VDC ukuya kwi-28.8VDC	I-20.4VDC ukuya kwi-28.8VDC
Max. yangoku ukusetyenziswa	US5	0.7A @ 12VDC 0.4A @ 24VDC	0.44A @ 24VDC	0.4A @ 24VDC
	US7	0.79A @ 12VDC 0.49A @ 24VDC	0.53A @ 24VDC	0.49A @ 24VDC
	US10	0.85A @ 12VDC 0.52A @ 24VDC	0.56A @ 24VDC	0.52A @ 24VDC
	US15	2.2A @ 12VDC 1.1A @ 24VDC	Akukho nanye	Akukho nanye
Ukubekwa wedwa		Akukho nanye

Bonisa	UniStream 5″	UniStream 7″	UniStream 10.1″	UniStream 15.6″
Uhlobo lwe-LCD	TFT
Uhlobo lwasemva	I-LED emhlophe
Ukuqina okukhanyayo (ukukhanya)	Ngokuqhelekileyo i-350 nits (cd/m2), kuma-25°C	Ngokuqhelekileyo i-400 nits (cd/m2), kuma-25°C	Ngokuqhelekileyo i-300 nits (cd/m2), kuma-25°C	Ngokuqhelekileyo i-400 nits (cd/m2), kuma-25°C
Ubomi obude be-backlight	30k iiyure
Isisombululo (pixels)	800 x 480 (WVGA)		1024 x 600 (WSVGA)	1366 x 768 (HD)
Ubungakanani	5”	7″	10.1″	15.6”
Viewindawo	Ububanzi x Ubude (mm) 108 x 64.8	Ububanzi x Ubude (mm) 154.08 x 85.92	Ububanzi x Ubude (mm) 222.72 x 125.28	Ububanzi x Ubude (mm) 344.23 x 193.53
Inkxaso yombala	65,536 (16bit)			16M (24bit)
Unyango lomphezulu	Engathi rheshe
Isikrini esibanjwayo	I-analog exhathisayo
Amandla okusebenza (min)	> 80 g (0.176 lb)

Ngokubanzi
I/O inkxaso	Ukuya kuthi ga kwi-2,048 amanqaku e-I / O
I/O eyakhelweyo	Ngokutsho imodeli
Ukwandiswa kwe-I/O yendawo	Ukongeza ii-I/Os zendawo, sebenzisa i-UAG-CX I/O I-Adapter yoKwandiswa. Ezi adaptha zibonelela ngenqaku loqhagamshelo kwiimodyuli eziqhelekileyo ze-UniStream Uni-I/O™. Unokudibanisa ukuya kwiimodyuli ze-80 ze-I / O kumlawuli omnye usebenzisa ezi ziadaptha. I-US15 kuphela - Dibanisa i-I/O kwisixokelelwano sakho ngokusebenzisa i-adapter ye-UAG-BACK-IOADP, cofa kwiphaneli yoqwalaselo lwe-in-one.
I/O ekude	Ukuya kuthi ga kwi-8 UniStream Remote I/O Adapter (URB)

Amazibuko oNxibelelwano
Izibuko ze-COM ezakhelwe ngaphakathi	Iinkcukacha zinikwe ngezantsi kwicandelo loNxibelelwano
Add-on Ports	Yongeza ukuya kuthi ga kwizibuko ezi-3 kwisilawuli esinye usebenzisa iimodyuli ze-Uni-COM™ UAC-CX

Inkumbulo yangaphakathi	Umgangatho (B5/C5)	I-Pro (B10/C10)
	RAM: 512MB I-ROM: Imemori ye-3GB yenkqubo ye-1GB yememori yomsebenzisi	RAM: 1GB I-ROM: Imemori ye-6GB yenkqubo ye-2GB yememori yomsebenzisi
Inkumbulo yeleli	1 MB
Inkumbulo yangaphandle	microSD okanye microSDHC ikhadi Ubungakanani: ukuya kuthi ga kwi-32GB, isantya seDatha: ukuya kuthi ga kwi-200Mbps
Ukusebenza kancinci	0.13µs
Ibhetri	Umzekelo: 3V CR2032 Lithium ibhetri Ubomi bebhetri: iminyaka emi-4 eqhelekileyo, kwi-25°C Ibhetri Ukubonwa okuphantsi kunye nesalathiso (nge-HMI kunye neNkqubo Tag).

Isandi (iimodeli zePro B10/C10 kuphela)
Ixabiso elincinci	192kbps
Ukuhambelana komsindo	I-stereo MP3 files
Ujongano	I-3.5mm Ijekhi yokuphuma yomsindo – sebenzisa intambo yomsindo ekhuselweyo ukuya kuthi ga kwi-3 m (9.84 ft)
Impedance	16Ω, 32Ω
Ukubekwa wedwa	Akukho nanye

Ividiyo (iimodeli zePro B10/C10 kuphela)
Iifomathi ezixhaswayo	MPEG-4 Visual, AVC/H.264

Unxibelelwano (Izibuko ezakhelwe ngaphakathi)	US5, US7, US10	US15
Ethernet port
Inani lamazibuko	1	2
Uhlobo lwezibuko	10/100 Isiseko-T (RJ45)
Auto crossover	Ewe
Uthethathethwano oluzenzekelayo	Ewe
Ukuzahlula voltage	500VAC ngomzuzu omnye
Intambo	Intambo ekhuselweyo ye-CAT5e, ukuya kuthi ga kwi-100 m (328 ft)
Isixhobo se-USB
Uhlobo lwezibuko	Mini-B	USB-C
Ireyithi yedatha	I-USB 2.0 (480Mbps)
Ukubekwa wedwa	Akukho nanye
Intambo	I-USB 2.0 iyahambelana; < 3 m (9.84 ft)
Umamkeli we-USB
Ukhuseleko lwangoku	Ewe

Ungeniso lweDijithali (T24, TR22 imifuziselo)
Inani lamagalelo	10
Uhlobo	Isinki okanye uMthombo
Ukuzahlula voltage
Igalelo kwibhasi	500VAC ngomzuzu omnye
Igalelo kwigalelo	Akukho nanye
Umthamo wegamatage	24VDC @ 6mA
Igalelo voltage
Isinki/Umthombo	Kwimeko: 15-30VDC, 4mA min. Imeko evaliweyo: 0-5VDC, 1mA max.
I-impedance yegama	4kΩ
Hluza	6ms eqhelekileyo

Ukufakwa kwe-Analog (T24, TR22 imifuziselo)
Inani lamagalelo	2
Uluhlu lwegalelo (6) (Impazamo! Umthombo wereferensi awufunyenwanga.)	Uhlobo Longeniso		Iinqobo ezisemgangathweni			Amaxabiso angaphaya koluhlu *
	0 ÷ 10VDC		0 ≤ Vin ≤ 10VDC			10 < Vin ≤ 10.15VDC
	0 ÷ 20mA		0 ≤ Iin ≤ 20mA			20 < Iin ≤ 20.3mA
	* Ukuphuphuma (7) ibhengezwa xa ixabiso legalelo lingaphezulu komda woluhlu olungaphezulu.
Ukulinganiswa okupheleleyo	±30V (Umqulutage), ±30mA (Okwangoku)
Ukubekwa wedwa	Akukho nanye
Indlela yokuguqula	Uqikelelo olulandelelanayo
Isigqibo	12 amasuntswana
Ukuchaneka (25°C / -20°C ukuya kuma-55°C)	±0.3% / ±0.9% yesikali esipheleleyo
I-impedance yokufaka	541kΩ (Umqulutage), 248Ω (Okwangoku)
Ukwala ingxolo	10Hz, 50Hz, 60Hz, 400Hz
Impendulo yenyathelo (8) (0 ukuya kwi-100% yexabiso lokugqibela)	Ukugudisa	Ukwala Ingxolo Frequency
		400Hz		60Hz	50Hz		10Hz
	Akukho nanye	2.7ms		16.86ms	20.2ms		100.2ms
	Ubuthathaka	10.2ms		66.86ms	80.2ms		400.2ms
	Phakathi	20.2ms		133.53ms	160.2ms		800.2ms
	Yomelele	40.2ms		266.86ms	320.2ms		1600.2ms

Ixesha lokuhlaziya (8)	Ukwala Ingxolo Frequency	Ixesha lokuhlaziya
	400Hz	5ms
	60Hz	4.17ms
	50Hz	5ms
	10Hz	10ms
Uluhlu lwesignali yokusebenza (umqondiso + indlela eqhelekileyo)	Umqulutagimowudi ye-e – AIx: -1V ÷ 10.5V ; CM1: -1V ÷ 0.5V Imo yangoku – AIx: -1V ÷ 5.5V ; I-CM1: -1V ÷ 0.5V (x=0 okanye 1)
Intambo	Isibini esijijekileyo esikhuselekileyo
Uxilongo (7)	Ukuphuphuma kwegalelo leAnalog

I-Relay Outputs (USx-xx-TR22)
Inani leziphumo	8 (O0 ukuya kwi-O7)
Uhlobo lwemveliso	Udluliselo, SPST-NO (iFom A)
Amaqela okuzahlula	Amaqela amabini aneziphumo ezisi-4 ngalinye
Ukuzahlula voltage
Iqela ukuya ebhasini	1,500VAC ngomzuzu omnye
Iqela kwiqela	1,500VAC ngomzuzu omnye
Imveliso kwimveliso phakathi kweqela	Akukho nanye
Okwangoku	2A ubuninzi bemveliso nganye (umthwalo oxhathisayo)
Umqulutage	250VAC / 30VDC ubuninzi
Ubuncinci bomthwalo	1mA, 5VDC
Ukutshintsha ixesha	10ms ubuninzi
Ukukhuselwa kwexesha elifutshane	Akukho nanye
Ubomi obulindelekileyo (9)	100k imisebenzi kumthwalo ophezulu

I-Sink Transistor Outputs (USx-xx-TR22)
Inani leziphumo	2 (O8 kunye ne-O9)
Uhlobo lwemveliso	Transistor, iSink
Ukubekwa wedwa
Imveliso kwibhasi	1,500VAC ngomzuzu omnye
Imveliso kwimveliso	Akukho nanye
Okwangoku	50mA ubuninzi. ngemveliso nganye
Umqulutage	Igama: 24VDC Uluhlu: 3.5V ukuba 28.8VDC
Kwimeko voltage yehle	1V ubuninzi
Ngaphandle kobume bokuvuza kwangoku	10µA max
Ukutshintsha amaxesha	Ukuvula: 1.6ms max. )4kΩ umthwalo, 24V) Ukucima: 13.4ms max. )4kΩ umthwalo, 24V)
Iziphumo zesantya esiphezulu
Ubuninzi bePWM	0.3Hz min. 30kHz ubuninzi. )4kΩ umthwalo(
Intambo	Isibini esijijekileyo esikhuselekileyo

Umthombo weZiphumo zeTransistor (USx-xx-T24)
Inani leziphumo	12
Uhlobo lwemveliso	Transistor, Umthombo (pnp)
Ukuzahlula voltage
Imveliso kwibhasi	500VAC ngomzuzu omnye
Imveliso kwimveliso	Akukho nanye
Iziphumo zonikezelo lwamandla ebhasini	500VAC ngomzuzu omnye
Iziphumo zonikezelo lwamandla kwimveliso	Akukho nanye
Okwangoku	0.5Ubuninzi bemveliso nganye
Umqulutage	Jonga iMthombo yeTransistor Outputs Power Supply specification ngezantsi
ON karhulumente voltage yehle	0.5V ubuninzi
OFF ukuvuza kombuso ngoku	10µUbuninzi
Ukutshintsha amaxesha	Ukuvula: 80ms ubuninzi, Ukucinywa: 155ms ubuninzi (Ukumelana nomthwalo <4kΩ(
PWM Frequency (10)	O0, O1: 3kHz ubukhulu. (Ukumelana nomthwalo < 4kΩ)
Ukukhuselwa kwexesha elifutshane	Ewe

Umthombo weZiphumo zeTransistor Ubonelelo lwaMandla (USx-xx-T24)
Umthamo wokusebenza ngegamatage	24VDC
Ukusebenza ivoltage	20.4 – 28.8VDC
Ubuninzi bokusetyenziswa kwangoku	30mA@24VDC Usetyenziso lwangoku alubandakanyi umthwalo wangoku

Okusingqongileyo	US5, US7, US10	US15
Ukhuseleko	Ubuso bangaphambili: IP66, NEMA 4X Ngasemva kwicala: IP20, NEMA1
Ubushushu bokusebenza	-20°C ukuya ku-55°C (-4°F ukuya ku-131°F)	0°C ukuya ku-50°C (32°F ukuya ku-122°F)
Ubushushu bokugcina	-30°C ukuya ku-70°C (-22°F ukuya ku-158°F)	-20°C ukuya ku-60°C (-4°F ukuya ku-140°F)
Ukufuma okuzalanayo (RH)	5% ukuya kwi-95% (engacondensing)
Umphakamo wokuSebenza	2,000 m (6,562 ft)
Umothuko	IEC 60068-2-27, 15G, 11ms ubude bexesha
Ukungcangcazela	IEC 60068-2-6, 5Hz ukuya 8.4Hz, 3.5mm rhoqo amplitude, 8.4Hz ukuya 150Hz, 1G isantya

Imilinganiselo	Ubunzima	Ubungakanani
I-US5-xx-B1	0.31 kg (0.68 lb)	Jonga kwimifanekiso ekwiphepha lesi-7
I-US5-xx-TR22	0.37 kg (0.81 lb)
I-US5-xx-T24	0.35 kg (0.77 lb)
I-US7-xx-B1	0.62 kg (1.36 lb)	Jonga kwimifanekiso ekwiphepha lesi-8
I-US7-xx-TR22	0.68 kg (1.5 lb)
I-US7-xx-T24	0.68 kg (1.5 lb)
I-US10-xx-B1	1.02 kg (2.25 lb)	Jonga kwimifanekiso ekwiphepha lesi-8
I-US10-xx-TR22	1.08 kg (2.38 lb)
I-US10-xx-T24	1.08 kg (2.38 lb)
I-US15-xx-B1	2.68Kg (5.9 lb)	Jonga kwimifanekiso ekwiphepha lesi-9

Amanqaku: 

1. Ubomi obuqhelekileyo bokukhanya ngasemva kwephaneli ye-HMI lixesha apho ukukhanya kwayo kuncipha ukuya kwi-50% yenqanaba layo lokuqala.
2. Iikhithi ze-Adapter yoKwandiswa kwe-UAG-CX ziquka iyunithi yeSiseko, iyunithi yokuPhelisa, kunye nentambo yokudibanisa. IYunithi yeSiseko iqhagamshela kumlawuli we-I/O Expansion Jack kwaye ivumela udibaniso lweemodyuli eziqhelekileyo ze-UniStream Uni-I/O™. Ukufumana iinkcukacha ezithe vetshe, jonga kwisikhokelo sokufakela imveliso kunye neenkcukacha zobugcisa.
3. Iimodyuli ze-Uni-COM™ CX ziplagwe ngqo kwi-Uni-COM™ CX yeModyuli yeJack ngasemva kwisilawuli. Iimodyuli ze-UAC-CX zinokufakelwa kolu lungelelwaniso lulandelayo:
   1. Ukuba imodyuli ye-serial port idityaniswe ngokuthe ngqo ngasemva kwe-UniStream, inokulandelwa kuphela yenye imodyuli yothotho, kwiimodyuli ezimbini zizonke.
   2. Ukuba uqwalaselo lubandakanya imodyuli ye-CANbus, kufuneka iqhagamshelwe ngokuthe ngqo ngasemva kwe-UniStream kwaye inokulandelwa ukuya kuthi ga kwiimodyuli ze-serial ezimbini, kwiimodyuli ezintathu zizonke. Ngolwazi olongezelelweyo, jonga kwisikhokelo sokufakela imveliso kunye neenkcukacha zobugcisa.
4. Xa utshintsha ibhetri yeyunithi, qinisekisa ukuba ibhetri entsha iyadibana okanye igqithise kwiinkcukacha zokusingqongileyo ezichazwe kolu xwebhu.
5. Isixhobo se-USB sisetyenziselwa ukuqhagamshela isixhobo kwiPC.
6. I-4-20mA inketho yokufaka iphunyezwa ngokusebenzisa i-0-20mA igalelo loluhlu. Amagalelo e-analog alinganisa amaxabiso angaphezulu kancinane kuluhlu lwegalelo legama (Igalelo Ngaphezulu koluhlu). Xa kuphuphuma igalelo, iSimo se-I/O esihambelanayo tag ibonisa oku, ngelixa ixabiso legalelo lirekhodwa njengelona xabiso likhulu elivumelekileyo. Umzekeloample, ukuba uluhlu lwegalelo yi-0 ukuya ku-10V, amaxabiso angaphezulu koluhlu anokufikelela kwi-10.15V, kunye naliphi na igalelotage ngasentla isaya kubhaliswa njenge-10.15V, kunye nenkqubo yokuPhuma tag yenziwe yasebenza.
7. Iziphumo zoxilongo ziboniswa kwisistim tags kwaye ingaba viewibhalwe nge-UniApps™ okanye imo ye-intanethi ye-UniLogic™.
8. Inyathelo lokuphendula kunye nexesha lokuhlaziya lizimeleyo kwinani leziteshi ezisetyenziswayo.
9. Ubomi obulindelekileyo bonxibelelwano lwe-relay iyahluka ngokuxhomekeke kwisicelo. Isikhokelo sokufakela imveliso sibonelela ngezikhokelo zokusebenzisa abafowunelwa kunye neentambo ezinde okanye imithwalo ye-inductive.
10. Iziphumo ze-O0 kunye ne-O1 zinokuqwalaselwa njengeziphumo eziqhelekileyo zedijithali okanye njengeziphumo ze-PWM. Iimpawu zeziphumo zePWM zisebenza kuphela xa iziphumo ziqwalaselwe njengeziphumo zePWM.

• Ulwazi olukolu xwebhu lubonisa iimveliso ngomhla wokushicilela. I-Unitronics inelungelo, ngokuxhomekeke kuyo yonke imithetho esebenzayo, nangaliphi na ixesha, ngokubona kwayo, kwaye ngaphandle kwesaziso, ukuyeka okanye ukutshintsha iimpawu, ukuyila, izixhobo kunye nezinye iinkcukacha zeemveliso zayo, kwaye mhlawumbi ngokusisigxina okanye okwethutyana Ukushiya kwimarike.
• Lonke ulwazi kolu xwebhu lunikelwe “njengoko lunjalo” ngaphandle kwewaranti yalo naluphi na uhlobo, nokuba ichaziwe okanye ichaziwe, kuquka kodwa ingaphelelanga kuzo naziphi na iziqinisekiso ezichaziweyo zokurhwebelana, ukufaneleka kwenjongo ethile, okanye ukungonaki. I-Unitronics ayithathi xanduva lweempazamo okanye ukushiya ulwazi oluchazwe kuyo
  olu xwebhu. Akukho siganeko siya kuba noxanduva lwawo nawuphi na umonakalo okhethekileyo, ongalindelekanga, ongathanga ngqo okanye olandelelweyo walo naluphi na uhlobo, okanye nawuphina umonakalo onokuthi uvele ngenxa okanye ngokunxulumene nokusetyenziswa okanye ukwenziwa kolu lwazi.
• Amagama orhwebo, iimpawu zentengiso, iilogo kunye neempawu zenkonzo ezithiwe thaca kolu xwebhu, kubandakanywa noyilo lwazo, ziyipropathi ye-Unitronics (1989) (R”G) Ltd. okanye amanye amaqela esithathu kwaye awuvumelekanga ukuzisebenzisa ngaphandle kwemvume ebhaliweyo yangaphambili yeUnitronics okanye umntu wesithathu onokuba ngabanini bazo.

FAQ

Umbuzo: Ngaba ndingayifaka iyunithi kwindawo enomswakama ophezulu?
A: Akukhuthazwa ukufaka iyunithi kwiindawo ezinomswakama ogqithiseleyo. Qinisekisa ukulandela imiba echaziweyo yokusingqongileyo.

Q: Yeyiphi isoftware yenkqubo ehambelana nesixhobo?
A: Isixhobo siyahambelana nesoftware yonke-kwinye ekhoyo njengokukhuphela mahala kwi-Unitronics yoqwalaselo lwehardware, unxibelelwano, kunye nezicelo ze-HMI/PLC.

Amaxwebhu / Izibonelelo

I-Unitronics US5-B5-B1 Yakhelwe kwi-UniStream Programmable Logic Controller [pdf] Isikhokelo somsebenzisi I-US5-B5-B1, i-US5-B5-B1 Yakhelwe kwi-UniStream Programmable Logic Controller, eyakhelwe kwi-UniStream Programmable Logic Controller, i-UniStream Programmable Logic Controller, i-Programmable Logic Controller, i-Logic Controller

Iimbekiselo

• Incwadi yokusebenzisa