AIN16-C-2 Imodyuli yoNgeniso yeAnalog
Incwadi yokusebenzisa
SmartGen -Yenza ijenereyitha yakho ilumke
I-SmartGen Technology Co., Ltd.
No.28 Xuemei Street, Zhengzhou, Henan, China
Tel: +86-371-67988888/67981888/67992951
+86-371-67981000(phesheya)
Ifeksi: +86-371-67992952
I-imeyile: sales@smartgen.cn
Web: www.smartgen.com.cn
www.smartgen.cn
Onke Amalungelo Agciniwe. Akukho nxalenye yolu papasho inokuphinda iveliswe nangaluphi na uhlobo (kuquka ukufotokopa okanye ukugcinwa ngayo nayiphi na indlela nge-elektroniki okanye ngenye indlela) ngaphandle kwemvume ebhaliweyo yomnini-copyright.
Izicelo zemvume ebhaliweyo yalowo unelungelo lokukhuphela ukuvelisa kwakhona nayiphi na inxalenye yolu papasho kufuneka zithunyelwe kwaSmartgen Technology kule dilesi ingasentla.
Nayiphi na ireferensi yamagama eemveliso ezinophawu lwentengiso asetyenziswe kolu papasho zezenkampani zabo.
I-SmartGen Technology inelungelo lokutshintsha imixholo yolu xwebhu ngaphandle kwesaziso sangaphambili.
Itheyibhile 1 - Uguqulelo lweSoftware
| Umhla | Inguqulelo | Umxholo |
| 2021-09-10 | 1.0 | Ukukhutshwa koqobo. |
| 2022-11-16 | 1. | Hlaziya ilogo yeSmartGen. |
Itheyibhile 2 – Ukucaciswa kophawu
| Uphawu | Umyalelo |
 PHAWULA |
Ugxininisa into ebalulekileyo yenkqubo ukuqinisekisa ukuchaneka. |
 ISILUMKO |
Ibonisa inkqubo okanye uqheliselo, olunokuthi, ukuba alugcinwanga ngokungqongqo, lunokubangela umonakalo okanye ukutshatyalaliswa kwezixhobo. |
 ISILUMKISO |
Ibonisa inkqubo okanye inkqubo, enokubangela ukwenzakala kubasebenzi okanye ekuphulukaneni nobomi ukuba ayilandelwa ngokuchanekileyo. |
PHEZULUVIEW
Imodyuli ye-AIN16-C-2 ye-Analog Input yimodyuli enamashaneli angama-16 e-4mA-20mA igalelo le-sensor kunye ne-3 iziteshi ze-speed sensor input. Idatha ye-4mA-20mA kunye nedatha yesantya ithunyelwa kumlawuli oyintloko ukuze kuqhutywe nge-RS485 port. Amaxabiso ahlukeneyo e-alarm threshold anokumiselwa kwinzwa nganye ngomlawuli oyintloko.
UKUSEBENZA KUNYE NEEMPAWU
- Nge-32-bit ARM esekelwe kwi-SCM, ukuhlanganiswa okuphezulu kwe-hardware kunye nokuthembeka ngakumbi;
- Kufuneka isetyenziswe kunye nomlawuli oyintloko kunye;
- Ireyithi ye-RS485 yonxibelelwano ye-baud inokusetwa njenge-9600bps okanye i-19200bps nge-dial switch;
- Idilesi yemodyuli inokusetwa njenge-1 okanye i-2 ngokucofa ngokucofa;
- Uluhlu olubanzi lonikezelo lwamandla DC (18 ~ 35) V, lufanelekile kwivolthi yebhetri eyahlukileyotagimo engqongileyo;
- 35mm isikhokelo sohlobo lokukhwelisa umzila kaloliwe;
- Uyilo lwemodyuli, i-terminal eplagiweyo, ubume be-compact kunye nokufakwa lula.
IIPARAMETHA ZOBUGCISA
Itheyibhile 3 - IiParameters zobuGcisa
| Into | Umxholo |
| Ukusebenza kweVoltagUluhlu | Inkcazo: DC18.0V-35.0V |
| Ukutya umbane | <0.5W |
| Uhlobo Loluvo Lwezimvo | (4-20)mA Uhlobo lwangoku |
| Ukuchaneka koMlinganiselo | Iklasi yesi-0.5 |
| IParameter yoNxibelelwano lweRS485 | Izinga le-Baud: 9600bps, Stop bit: 2-bit, bit Data: 8-bit, Parity bit: akukho mlinganiso |
| Case Dimension | 161.6mm x 89.7mm x 60.7mm |
| Umlinganiselo kaloliwe | 35mm |
| Ubushushu bokusebenza | (-25—+70) °C |
| Ukufuma okusebenzayo | (20—'93)%RH |
| Ubushushu boGcino | (-30—+80) °C |
| Ubunzima | 0.33kg |
UQHAGAMSHELO
Umzobo we-Fig.1 - AIN16-C-2 uMzobo wePaneli
Itheyibhile 4 – uQhagamshelwano lweTheminali
| Hayi. | Umsebenzi | Ubungakanani beCable | Inkcazo |
| 1 | B- | 1.0mm2 | Unikezelo lwamandla e-DC igalelo elibi. |
| 2 | B+ | 1.0mm2 | Unikezelo lwamandla ombane lwe-DC lunegalelo elihle. |
| 3 | NC | Akukho Nxibelelwano. | |
| 4 | I-1200 ye-Terminal ehambelana noKuchasa | 0.5mm2 | Ukuqhagamshela okufutshane kwiSitenari sesi-4 kunye neSithili sesi-5 ukuba Ukuchasana okuhambelanayo kuyafuneka. |
| 5 | A(+) | 0.5mm2 | Izibuko le-RS485 lonxibelelwano nenkosi umlawuli. |
| 6 | B(-) | ||
| 7 | MP1(-) | 0.5mm2 | Qhagamshela ngesivamvo sesantya (ucingo olukhuselweyo lu kucetyiswa). Igalelo lesivamvo sesantya (-), B- liqhagamshelwe kwisilawuli. |
| 8 | MP1(+) | 0.5mm2 | |
| 9 | MP2(-) | 0.5mm2 | Qhagamshela ngesivamvo sesantya (ucingo olukhuselweyo lu kucetyiswa). Igalelo lesivamvo sesantya (-), B- liqhagamshelwe kwisilawuli. |
| 10 | MP2(+) | 0.5mm2 | |
| 11 | MP3(-) | 0.5mm2 | Qhagamshela ngesivamvo sesantya (ucingo olukhuselweyo lu kucetyiswa). Igalelo lesivamvo sesantya (-), B- liqhagamshelwe kwisilawuli. |
| 12 | MP3(+) | 0.5mm2 | |
| 13 | I-AIN16(mA) | 0.5mm2 | (4-20)mA igalelo le-analog. |
| IIMPAWU | IZIBANGE EZINAKO | IZIMVO |
| • Impompo enengxolo | – Impompo ebanjiwe. – Akukho manzi kuthungelwano. – Uthintelo kunikezelo lwamanzi. |
– Ukuba amanzi anamasuntswana inqunyanyiswe kuyo okanye inzima kakhulu, kufuneka ufakele isihluzo sokuthambisa amanzi. |
| • Ukukhutshwa okucothayo, ikofu etshisiweyo. | – Ulungelelwaniso lwempompo olungachanekanga. Impompo enedrafti encitshisiweyo | – Jonga uxinzelelo lwempompo ngegeyiji. |
| • Ukuhambisa okucothayo. • Ikofu etshileyo nebandayo. • Ukhilimu omnyama othanda ukuba ne-porous. • Ukukhutshwa kwekofu okuqhubekayo kuyema ngequbuliso kwaye isalathisi 'akukho manzi sidanyaze. • Ikofu enye kunye nezibane zekofu ezimbini ezidanyazayo. |
– Indawo yokugalela ilungile kakhulu. – Uxinzelelo lwempompo ephantsi. -Isihluzo sesitofu simdaka, sithintelwe kancinci. – Umgangatho ophantsi wamanzi kwidama – Umthamo counter ayisebenzi ngokuchanekileyo. – Ikofu ilungile kakhulu okanye akukho manzi. |
– Ukuba bayaqhwanyaza kwaye bazi nokuba kungenxa yekhofi, okanye ngenxa yokungabikho kwamanzi okanye ngenxa ye-volume counter, khupha isibambi sokucoca kwaye ucinezele iqhosha. Ukuba ukuqhwanyaza kuyaqhubeka kwaye amanzi aphumile, mhlawumbi ngenxa ye-volume counter. |
| • Oomatshini bombane: Ikofu enye, izitshixo zekofu ezimbini kunye nesalathisi senqanaba le-LED eliqhwanyazayo. • Oomatshini abazisebenzelayo: Inqanaba laManzi eBoiler liyadanyaza. |
-I-alamu yeNqanaba laManzi eBoiler ivuliwe. | – Khangela isivalo samanzi esingundoqo ivuliwe okanye kukho amanzi kwitanki yangaphakathi (ngokwenguqulelo). Isilumkiso siya kunyamalala kube kanye umatshini ucinyiwe kwaye uvuliwe kwakhona. |
| Hayi. | Umsebenzi | Ubungakanani beCable | Inkcazo |
| 41 | I-AIN11(Com(B+)) | 0.5mm2 | B+ voltagi-e output (ukubonelela ngombane wokuhambisa uxinzelelo). |
| 42 | I-AIN11(mA) | (4-20)mA igalelo le-analog. | |
| 43 | I-AIN12(Com(B+)) | 0.5mm2 | B+ voltagi-e output (ukubonelela ngombane wokuhambisa uxinzelelo). |
| 44 | I-AIN12(mA) | (4-20)mA igalelo le-analog. | |
| TSHINTSHA | Ukukhetha idilesi: Yimodyuli 1 xa iswitshi 1 iqhagamshelwe kwi-terminal 12 ngelixa imodyuli yesi-2 xa idibanisa kwi-terminal. Ukukhetha izinga le-Baud: Kuyi-9600bps xa i-switch 2 ixhunyiwe kwi-terminal 12 ngelixa i-19200bps xa idibanisa kwi-terminal ON. |
||
| AMANDLA | Ubonelelo lwamandla kunye nesalathisi esiqhelekileyo sonxibelelwano; Kuyadanyaza xa unxibelelwano lungaqhelekanga, luhlala lukhanya xa unxibelelwano luqhelekile. |
||
| LINK | izibuko lokuphucula inkqubo; lungisa iiparameters ezingagqibekanga. | ||
ISICELO ESIQHELEKILEYO
IMILINGANISELO YECALA
UKULUNGISA INGXAKI
| Ingxaki | Isisombululo Esinokubakho |
| Umlawuli akukho mpendulo amandla |
Jonga iibhetri zokuqalisa; Jonga iintambo zoqhagamshelwano zomlawuli; |
| Ukusilela konxibelelwano lwe-RS485 | Khangela ukuba iingcingo zeRS485 ziqhagamshelwe ngokuchanekileyo; Khangela ukuba ukuxhathisa kwe-1200 kuxhunyiwe; Khangela ukuba izinga le-baud kunye ne-stop-bit ye-master controller ichanekile. |
Amaxwebhu / Izibonelelo
 |
I-SmartGen AIN16-C-2 Imodyuli yoNgeniso yeAnalog [pdf] Incwadi yokusebenzisa I-AIN16-C-2, iModyuli yoNgeniso ye-Analog, i-AIN16-C-2 imodyuli yoNgeniso ye-Analog, imodyuli yoNgeniso, imodyuli |
