INCWADI YOKUFAKA
Z-4RTD2-SI
IZILUMKISO ZOKUQALA
Igama elithi ISILUMKISO elandulelwa luphawu libonisa iimeko okanye izenzo ezibeka ukhuseleko lomsebenzisi emngciphekweni. Igama elithi ATTENTION eyandulelwe isimboli libonisa iimeko okanye izenzo ezinokuthi zonakalise isixhobo okanye isixhobo esixhunyiwe. Iwaranti iya kuba lilize kwaye ingabikho kwimeko yokusetyenziswa ngokungafanelekanga okanye tampering kunye nemodyuli okanye izixhobo ezibonelelwe ngumenzi njengoko kuyimfuneko ekusebenzeni kwayo okuchanekileyo, kwaye ukuba imiyalelo equlethwe kule ncwadana ayilandelwa.
 |
ISILUMKISO: Umxholo opheleleyo wale ncwadana kufuneka ufundwe phambi kokuba kwenziwe nawuphi na umsebenzi. Imodyuli kufuneka isetyenziswe kuphela ngabasebenzi bombane abaqeqeshiweyo. Amaxwebhu athile ayafumaneka nge-QR-CODE eboniswe kwiphepha loku-1. |
 |
Imodyuli kufuneka ilungiswe kwaye iindawo ezonakalisiweyo zitshintshwe nguMenzi. Imveliso inovelwano ngokukhutshwa kwe-electrostatic. Thatha amanyathelo afanelekileyo ngalo naluphi na umsebenzi. |
 |
Ukulahlwa kwenkunkuma yombane neye-elektroniki (esebenzayo kwiManyano yaseYurophu nakwamanye amazwe anokurisayikilishwa). Isimboli kwimveliso okanye ukupakishwa kwayo ibonisa imveliso kufuneka inikezelwe kwiziko lokuqokelela eligunyazisiweyo ukuba liphinde lisetyenziswe inkunkuma yombane neye-elektroniki. |
https://www.seneca.it/products/z-4rtd2-si
UXWEBHU Z-4RTD2-SI
SENECA srl; Nge-Austria, 26 - 35127 - PADOVA - ITALY; Umnxeba. +39.049.8705359 – Ifeksi +39.049.8706287
IINKCUKACHA ZOQHAKAMSHELWANO
| Uxhaso lobuchwepheshe | inkxaso@seneca.it | Ulwazi lwemveliso | sales@seneca.it |
Olu xwebhu luyipropathi ye-SENECA srl. Iikopi kunye nokuveliswa kwakhona akuvumelekanga ngaphandle kokuba kugunyazisiwe.
Umxholo wolu xwebhu uhambelana neemveliso ezichazwe kunye nobuchwepheshe.
Idatha echaziweyo inokuguqulwa okanye yongezwe ngeenjongo zobugcisa kunye / okanye ukuthengisa.
UHLELO LWEMODYULI
Imilinganiselo: 17.5 x 102.5 x 111 mm
Ubunzima: 100 g
Isikhongozeli: PA6, emnyama
IIMPAWU NGE-LED PHAMBILI
| I-LED | IMEKO | Intsingiselo ye-LED |
| Pwr | ON | Isixhobo sinikwe amandla ngokuchanekileyo |
| FAIL | ON | Isixhobo sikwimeko yempazamo |
| RX | Ukudanyaza | Irisithi yedatha kwizibuko #1 RS485 |
| TX | Ukudanyaza | Ugqithiso lwedatha kwizibuko #1 RS485 |
INGCACISO YOBUGCISA
| IZIQINISEKISO |   https://www.seneca.it/products/z-4rtd2-si/doc/CE_declaration |
| UKUNIKEZWA AMANDLA | 10 ÷ 40Vdc; 19 ÷ 28Vac; 50-60Hz; Ubukhulu be-0.8W |
| IMEKO ZOKUSINGQONGILEYO | Ubushushu bokusebenza: -25°C ÷ +70°C Ukufuma: 30% ÷ 90% ukungaxinanisi Ubushushu bokugcina: -30°C ÷ +85°C Ukuphakama: Ukuya kuma-2000 m ngaphezu komphakamo wolwandle Umgangatho wokhuseleko: IP20 |
| INDIBANO | 35mm DIN kaloliwe IEC EN60715 |
| IZIXHOBO | Ukususwa kwe-3.5 mm ibhloko ye-pitch terminal, i-1.5 mm2 icandelo lentambo enkulu |
| IZIXHOBO ZOKUNXIBELELWANO | Ibhlokhi yesikrufu esinendlela ezi-4; max. icandelo 1.5mmTION 2; inyathelo: 3.5 mm IDC10 isidibanisi ngasemva ye-IEC EN 60715 DIN bar, Modbus-RTU, 200÷115200 Baud Micro USB ngaphambili, Modbus protocol, 2400 Baud |
| UKUKHUSELELWA |  |
| ADC | Isigqibo: 24 bit Ukuchaneka kokulinganisa i-0.04% yesikali esipheleleyo Iklasi / Prec. Isiseko: 0.05 Ubushushu bokuqhuba: < 50 ppm/K Umgca: 0,025% yesikali esipheleleyo |
QAPHELA: Ifuse elibazisekileyo enomlinganiselo omkhulu we-2.5 A kufuneka ifakwe kuthotho kunye noqhagamshelo lombane, kufutshane nemodyuli.
UKUBEKA I-DIP-SWITISHI
Isikhundla se-DIP-iiswitshi sichaza iiparameters zonxibelelwano lwe-Modbus kwimodyuli: Idilesi kunye ne-Baud Rate
Le theyibhile ilandelayo ibonisa amaxabiso e-Baud Rate kunye neDilesi ngokwesicwangciso seeswitshi ze-DIP:
| DIP-Tshintsha isimo | |||||
| SW1 POSITION | I-BAUD | SW1 POSITION | Idilesi | POSITION | ISIQINISEKISO |
| 1 2 3 4 5 6 7 8 | 3 4 5 6 7 8 | 10 | |||
 ---------- |
9600 |  |
#1 | |
Kukhubazekile |
| ---------- |
19200 | |
#2 | |
Ivuliwe |
| ---------- |
38400 | • • • • • • • • • | # ... | ||
| ---------- |
57600 | |
#63 | ||
|
Ukusuka kwi-EEPROM | |
Ukusuka kwi-EEPROM | ||
Phawula: Xa i-DIP – icinyiwe u-1 ukuya ku-8, useto lonxibelelwano luthathwa kwiprogramming (EEPROM).
Phawula I-2: Umgca we-RS485 kufuneka upheliswe kuphela ekupheleni komgca wonxibelelwano.
| IISETHINGI ZEFACTORY | |||||||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
|
|
|
|
|
|
|
|
| ILEGENDI | |
|
ON |
|
CIMA |
Indawo yedip-switshi ichaza iiparamitha zonxibelelwano zemodyuli.
Uqwalaselo olungagqibekanga lulolu hlobo lulandelayo: Idilesi 1, 38400, akukho mlinganiso, 1 stop bit.
| CH1 | CH2 | CH3 | CH4 | |
| Uhlobo Lwenzwa | PT100 | PT100 | PT100 | PT100 |
| Uhlobo lwedatha ebuyisiweyo, lulinganiswa nge: | °C | °C | °C | °C |
| Uqhagamshelwano | 2/4 IINGCWANO | 2/4 IINGCWANO | 2/4 IINGCWANO | 2/4 IINGCWANO |
| Ireyithi yokufumana | 100ms | 100ms | 100ms | 100ms |
| Umqondiso we-LED wokungaphumeleli kwetshaneli | EWE | EWE | EWE | EWE |
| Ixabiso elilayishiweyo kwimeko yempazamo | 850 °C | 850 °C | 850 °C | 850 °C |
UHLAZIYO LWEFIRMWARE
Inkqubo yohlaziyo lweFirmware:
- Nqamula isixhobo kunikezelo lwamandla;
- Ukubamba iqhosha lokuhlaziya i-firmware (ebekwe njengoko kuboniswe kumzobo kwicala), phinda uqhagamshele isixhobo kunikezelo lwamandla;
- Ngoku isixhobo sikwimo yokuhlaziya, qhagamshela intambo ye-USB kwiPC;
- Isixhobo siya kuboniswa njengeyunithi yangaphandle "RP1-RP2";
- Khuphela i-firmware entsha kwiyunithi "ye-RP1-RP2";
- Kanye firmware file Ikhutshiwe, isixhobo siya kuqalisa ngokuzenzekelayo.
IMIGAQO YOKUFAKA
Imodyuli yenzelwe ukufakwa ngokuthe nkqo kwi-DIN 46277 kaloliwe. Ukuze usebenze ngokugqibeleleyo kunye nobomi obude, kufuneka kubonelelwe umoya owaneleyo. Kuphephe ukubeka i-ducting okanye ezinye izinto ezithintela iindawo zokungena komoya. Gwema ukunyuswa kweemodyuli phezu kwezixhobo ezivelisa ukushisa. Kunconywa ukufakwa kwindawo engezantsi yepaneli yombane.
QAPHELA Ezi zixhobo zodidi oluvulekileyo kwaye zenzelwe ukufakela kwindawo ebiyelweyo/iphaneli enika ukhuseleko lomatshini kunye nokhuseleko ekusasazeka komlilo.
UKUQHAGAMSHELWA KOMbane
ISILUMKO
Ukuhlangabezana neemfuno zokhuselo lwe-electromagnetic:
– sebenzisa iintambo zomqondiso ezikhuselekileyo;
– qhagamshela ikhaka kwisixokelelwano somhlaba esisisixhobo esikhethekileyo;
- iintambo ezikhuselekileyo ezikhuselekileyo kwezinye iintambo ezisetyenziselwa ukufakela umbane (i-transformers, inverters, motors, njl ...).
QAPHELA
Sebenzisa kuphela i-aluminiyam yobhedu okanye i-copper-clad okanye i-AL-CU okanye ii-conductor ze-CU-AL
Ukunikezelwa kwamandla kunye ne-interface ye-Modbus ifumaneka ngokusebenzisa i-Seneca DIN ibhasi kaloliwe, nge-IDC10 isiqhagamshelo esingasemva, okanye i-Z-PC-DINAL2-17.5 i-accessory.
isiqhagamshelo ngasemva (IDC 10)
Umzobo ubonisa iintsingiselo ze-IDC10 zezikhonkwane zokudibanisa ukuba iisignali ziza kuthunyelwa ngazo ngokuthe ngqo.
IINGOZI:
imodyuli yamkela iprobes yobushushu kunye ne-2, 3, kunye ne-4 yoqhagamshelwano lwecingo.
Kuqhagamshelo lombane: iintambo ezikhuselweyo ziyacetyiswa.
| 2 IINGCWANO | Olu xhulumaniso lunokusetyenziswa kumgama omfutshane (< 10 m) phakathi kwemodyuli kunye neprobe. Olu xhulumaniso luzisa impazamo yokulinganisa elingana nokuchasana kweentambo zoqhagamshelwano. |
| 3 IINGCWANO | Uqhagamshelwano oluza kusetyenziswa kumgama ophakathi (> 10 m) phakathi kwemodyuli kunye neprobe. Isixhobo senza imbuyekezo kwixabiso eliphakathi lokuchaswa kweentambo zokudibanisa. Ukuqinisekisa imbuyekezo echanekileyo, iintambo kufuneka zibe nokuchasana okufanayo. |
| 4 IINGCWANO | Uqhagamshelwano oluza kusetyenziselwa imigama emide (> 10 m) phakathi kwemodyuli kunye neprobe. Inika ukuchaneka okuphezulu, kwi view into yokuba isixhobo sifunda ukuchasana kwenzwa ngokuzimeleyo ekuchaseni iintambo. |
| IINPUT PT100EN 607511A2 (ITS-90) | IINPUT PT500 EN 607511A2 (ITS-90) | ||
| UDIDI LOMLINGANISO | I -200 = +650°C | UDIDI LOMLINGANISO | I -200 + +750°C |
| IINPUT PT1000 EN 60751/A2 (ITS-90) | Igalelo NI100 DIN 43760 | ||
| UDIDI LOMLINGANISO | -200 + +210°C | UDIDI LOMLINGANISO | -60 + +250°C |
| Igalelo CU50 GOST 6651-2009 | Igalelo CU100 GOST 6651-2009 | ||
| UDIDI LOMLINGANISO | I -180 + +200°C | UDIDI LOMLINGANISO | I -180 + +200°C |
| Igalelo Ni120 DIN 43760 | Igalelo NI1000 DIN 43760 | ||
| UDIDI LOMLINGANISO | I -60 + +250°C | UDIDI LOMLINGANISO | I -60 + +250°C |
MI00581-0-EN
INCWADI YOKUFAKA
Amaxwebhu / Izibonelelo
 |
SENECA Z-4RTD2-SI Igalelo leAnalog okanye iModyuli yokuPhuma [pdf] Incwadi Yomyalelo Z-4RTD2-SI, i-Analog Input okanye iModyuli yePhulo, Z-4RTD2-SI Igalelo leAnalog okanye iModyuli yePhulo |
