SelectBlinds 15 Channel Remote Control Programming

Iinkcukacha

Umqulutage	I-3V (CR2450)
Rhoqo kwiRadiyo	433.92 MHz Bi-directional
Amandla oThutho	10 yeemilitha
Ubushushu bokusebenza	14°F ukuya ku-122°F (-10°C ukuya ku-50°C)
Uhlengahlengiso lweRF	FSK
Umsebenzi weLock	Ewe
IP Rating	IP20
Umgama woThutho	ukuya kuthi ga kwi-200m (ngaphandle)

IMIYALELO YOKHUSELEKO

1. Musa ukuveza iimoto kwindawo efumileyo, damp, okanye iimeko zobushushu obugqithisileyo.
2. Musa ukuqhuba kwimoto.
3. Musa ukusika i-eriyali. Yigcine icacile kwizinto zetsimbi.
4. Musa ukuvumela abantwana badlale ngesi sixhobo.
5. Ukuba intambo yamandla okanye isidibanisi sonakalisiwe, musa ukusebenzisa
6. Qinisekisa ukuba intambo yombane kunye ne-eriyali zicacile kwaye zikhuselwe kwiindawo ezihambayo.
7. Ikheyibhile etyhutyha iindonga kufuneka ibekwe yodwa ngokufanelekileyo.
8. Imoto kufuneka ixhonywe kwindawo ethe tye kuphela.
9. Ngaphambi kokufakela, susa iintambo ezingafunekiyo kwaye ukhubaze izixhobo ezingafunekiyo ekusebenzeni okunamandla.

INQEQESHO ISILUMKISO SEBHETRI

1. Susa kwaye uyisebenzise ngokukhawuleza okanye ulahle iibhetri ezisetyenzisiweyo ngokwemigaqo yendawo kwaye uzigcine kude nabantwana. Sukulahla iibhetri kwinkunkuma yasekhaya okanye utshise.
2. Kwaneebhetri ezisetyenzisiweyo zisenokubangela ukwenzakala kakhulu okanye ukufa.
3. Tsalela iziko lolawulo lwetyhefu lendawo ukuze ufumane ulwazi ngonyango.
4. I-CR2450 luhlobo lwebhetri oluhambelanayo.
5. Ibhetri yesiqhelo voltage yi 3.0V.
6. Iibhetri ezingaphinde zitshajwe akufunekanga ziphinde zitshajwe.
7. Musa ukunyanzelisa ukukhupha, ukutshaja kwakhona, ukuqhawula, ubushushu obungaphezulu kwe-50 ° C / 122 ° F okanye utshise. Ukwenza oko kunokubangela ukwenzakala ngenxa yokukhupha umoya, ukuvuza okanye ugqabhuko-dubulo olukhokelela ekutshisweni kwemichiza.
8. Qinisekisa ukuba iibhetri zifakwe ngokuchanekileyo ngokwe polarity (+ kunye -). Musa ukuxuba iibhetri ezindala kunye ezintsha, iintlobo ezahlukeneyo okanye iintlobo zeebhetri, ezifana ne-alkaline, i-carbon-zinc, okanye iibhetri ezinokutshajwa kwakhona.
9. Susa kwaye ngokukhawuleza usetyenziswe ngokutsha okanye ulahle iibhetri kwisixhobo esingasetyenziswanga ixesha elide ngokwemigaqo yendawo.
10. Soloko ukhusela ngokupheleleyo indawo yebhetri. Ukuba indawo yebhetri ayivaleki ngokukhuselekileyo, yeka ukusebenzisa imveliso, susa iibhetri, kwaye uzigcine kude nabantwana.

ISILUMKISO

• INGOZI YOKUMELA: Le mveliso iqulethe iseli yeqhosha okanye ibhetri yemali.
• UKUFA okanye ukwenzakala okumandundu kunokwenzeka ukuba kutyiwe.
• Iseli yeqhosha eliginyiweyo okanye ingqekembe yebhetri yeseli inokubangela i-Internal Chemical Burns kwisithuba nje seeyure ezi-2.
• GCINA iibhetri ezintsha nezisele zisetyenzisiwe AKUFIKELE KWABANTWANA.
• Funa unyango ngoko nangoko ukuba ibhetri irhanelwa ukuba iginywe okanye ifakwe kulo naliphi na ilungu lomzimba.
• I-CR 2450, 3V

ULAWULO OLUKUDEVIEW

Nceda ufunde ngaphambi kokufaka kunye nokusetyenziswa. Gcina le miyalelo ukuze uyisebenzise kwixesha elizayo.

IQHOSHA IMIYALELO

P1 IQHOSHA LENDAWO

UKUTSHINTSHA IBHATHARI

• a. Faka ngobunono isixhobo se-ejector esibandakanyiweyo kwindawo yokuvula umngxuma kwaye usebenzise inani elincinci loxinzelelo kwikhava kwaye utyibilikise isiciko.
• b. Faka ibhetri (CR2450) ngecala elihle (+) lijonge phezulu.
• c. Slayida ngobunono isigqubuthelo ngasemva de kuvakala isandi esithi “cofa”.

UBUNGO ABANGAPHAMBILI – KHUBAZA UKUSETYENZISWA KOMDA

• a. Susa isiciko kwicala elingasemva lendawo ekude, iswitshi yokutshixa ikwikona yasekunene.
• b. Hambisa iswitshi kwindawo ethi “Tshixa” ukuvala le miyalelo ilandelayo, kude kuya kubonisa “L” (tshixa):
  • Guqula iMotor Direction
  • Ukuseta uMda oPhezulu kunye noPhantsi
  • Lungisa umda
  • Imowudi yokuqengqeleka okanye iMowudi eyiSheer
• c. Hambisa iswitshi kwindawo ethi "Vula" ukuvavanya yonke imisebenzi ekude, kude kuya kubonisa "U" (vula).

*Olu phawu luphambili lujongwe ukuba lusetyenziswe emva kokuba yonke inkqubo yomthunzi igqityiwe. Imowudi yomsebenzisi iya kuthintela ukutshintsha kwemida ngengozi okanye ebingalindelekanga.

IINKETHO ZENKETHO

KHETHA IJESHI

• a. Cinezela “<” iqhosha kwirimowuthi ukukhetha isitishi esisezantsi.
• b. Cofa iqhosha elithi ">" kwirimothi ukukhetha isitishi esiphezulu.

Fihla iitshaneli ezingasetyenziswanga

• a. Press and Hold (about 3 sec) “<” and “>” buttons simultaneously until re-mote control displays “C” (channel).
• b. Cofa iqhosha elithi "<" okanye ">" ukukhetha ubungakanani obufunekayo betshaneli (phakathi kwe-1 ukuya kwi-15).
• c. Cofa iqhosha elithi “Yeka” ukuqinisekisa ukhetho (umzekeloample ibonisa ukhetho lwamatshaneli ama-5). I-LED iya kubonisa "O" (Kulungile) kanye ukuqinisekisa ukhetho.

NDIYAQALISA

Kubalulekile ukuqinisekisa ukuba imoto ivukile kwaye ikulungele ukufumana inkqubo. Ukwenza oku, cofa iqhosha elithi "P1" kwi-motor ngaphantsi kwe-1 sec, ukuvula i-motor kwi-Sleep Mode.

IQINISEKISO / ULAWULO OLUNGAMALI

PHAWULA: I-Honeycomb kunye neeMotor eziyimfama eziHolizonti UNGAZIBHEKI.

• a. Cinezela iqhosha elithi “P1” (malunga nemizuzwana emi-2) kwintloko yemoto de i-motor jogs x1 kunye ne-beep x1*.
• b. Kwimizuzwana eyi-10 elandelayo, cofa kwaye ubambe iqhosha elithi “Yeka” kwisilawuli kude kude kube yi-motor jogs x2 kunye ne-beep x3*.

* Phinda inkqubo efanayo ukukhulula ulawulo olukude.

TSHINTSHA INKQUBO YEMOTO (UKUBA KUFUNEKA)
Lo msebenzi usebenza kuphela xa kungekho mida ibekiweyo. Ukuba i-motor inemida ephezulu kunye nesezantsi ebekiweyo, ungatshintsha kuphela icala ngokucofa iqhosha "P1" (malunga ne-10 sec) kwintloko yemoto kude kube yi-motor jog x3 kunye ne-beep x3.

Cofa iqhosha elithi "Phezulu" okanye "Phantsi" ukujonga ukuba umthunzi uhamba kwicala elifunekayo.
Ukuba ufuna ukubuyisela umva indlela, cofa kwaye ubambe (malunga nemizuzwana emi-2) amaqhosha “Phezulu” kunye “Phantsi” ngaxeshanye de imotor jogs x1 kunye neebeep x1.

 

UKUBEKA UMDA PHEZULU NAPHANTSI

SET UPPER LIMIT

• a. Cofa iqhosha elithi "Phezulu" ukuphakamisa umthunzi, emva koko ucofe iqhosha elithi "Yeka" xa likumda ophezulu ofunekayo.
• b. Cofa kwaye ubambe (malunga nemizuzwana emi-5) “Phezulu” kunye “Yeka” amaqhosha ngaxeshanye de imotor jogs x2 kunye neebeep x3.

WEKA UMDA ANGAPHANSI

• a. Cofa iqhosha elithi “Phantsi” ukuthoba umthunzi, emva koko ucofe iqhosha elithi “Yeka” xa likumda osezantsi ofunekayo.
• b. Cinezela kwaye ubambe (malunga nemizuzwana emi-5) “Phantsi” kunye “Yeka” amaqhosha ngaxeshanye de imotor jogs x2 kunye neebeep x3.

*Ukuba uphuma kwimeko yokumisela umda phambi kokuba ugqibe useto lomda, imoto iya kuthatha imida esele ikhona.

LUNGISA IMIDA

LUNGISA UMDA OPHEZULU

• a. Cofa kwaye ubambe (malunga nemizuzwana emi-5) “Phezulu” kunye “Yeka” amaqhosha ngaxeshanye de imotor jogs x1 kunye neebeep x1.
• b. Sebenzisa iqhosha elithi "Phezulu" ukuphakamisa umthunzi kwindawo ephezulu oyifunayo, kwaye usebenzise iqhosha elithi "Phezulu" okanye "Phantsi" ukwenza uhlengahlengiso lokugqibela ukuba kukho imfuneko.
• c. Cofa kwaye ubambe (malunga nemizuzwana emi-5) “Phezulu” kunye “Yeka” amaqhosha ngaxeshanye de imotor jogs x2 kunye neebeep x3.

LUNGISELELA UMDA OPHANTSI

• a. Cofa kwaye ubambe (malunga nemizuzwana emi-5) “Phantsi” kunye “Yeka” amaqhosha ngaxeshanye de imotor jogs x1 kunye neebeps x1.
• b. Use “Down” buttonto lower the shade to the desired lowest position, and use “Up” or “Down” button to do the final adjustment if necessary.
• c. Cinezela kwaye ubambe (malunga nemizuzwana emi-5) “Phantsi” kunye “Yeka” amaqhosha ngaxeshanye de imotor jogs x2 kunye neebeep x3.

INDAWO EYAYITHANDAYO

BEKELA INDAWO OYITHANDAYO

• a. Sebenzisa iqhosha elithi "Phezulu" okanye "Phantsi" ukuhambisa umthunzi kwindawo oyifunayo.
• b. Press and hold one “P2” button on the back of remote control until motor jogs x1 and beeps x1.
• c. Cinezela kwaye ubambe iqhosha elithi "Yeka" de imotor jogs x1 kunye neebhips x1.
• d. Kwakhona, cofa iqhosha elithi “Yeka” de imotor jogs x2 kunye neebeps x3.

UKUSEBENZISA INDAWO OYITHANDAYO
Cinezela kwaye ubambe (malunga nemizuzwana emi-2)
“Stop” button, motor will move to Favorite position.

SUSA INDAWO OYITHANDAYO

• a. Cinezela iqhosha elinye elithi "P2" de i-motor jogs kunye ne-beep x1.
• b. Cinezela (malunga nemizuzwana emi-2) iqhosha elithi “Yima” de i-motor jogs kunye ne-beep x1.
• c. Kwakhona, cofa iqhosha elithi “Yeka” de imotor jogs x1 kunye nebeep ende x1.

UZIQHUBEKA NJANI UKUSUKA KWIMODILE YEROLLER / INDLELA YOKUQHUBA
IMODI YOMTHUNZI WE-ROLLER-Imowudi ehlala ikho, ivumela ukunyusa ngokuqhubekayo / ukuthotywa komthunzi emva kokushicilela okufutshane.

• a. Press and hold (about 5 sec)“Up” and “Down” buttons simultaneously until motor jogs x1.
• b. Press and hold (about 2 sec)“Stop” button until motor jogs x2 and beeps x3.

Ngolawulo oluchanekileyo kunye nohlengahlengiso, sebenzisa iMowudi ye-Sheer Shade.

SHEER SHADE MODE – Allows for slight adjustment after a short press and raising/ lowering of shade after a longer press

• a. Cinezela kwaye ubambe (malunga nemizuzwana emi-5) amaqhosha “Phezulu” kunye “Phantsi” ngaxeshanye de imotor jog x1.
• b. Press and hold (about 2 sec)“Stop” button until motor jog x1 and beep x1.

UKUSEBENZISA ULAWULO OLUKHOYO

• a. On the current remote control, press one “P2” button until motor jogs x1 and beeps x1.
• b. Once more, on the current remote control, press one “P2” button until motor jogs x1 and beeps x1.
• c. On the New remote control, press one “P2” button until motor jogs x2 and beeps x3.

*Phinda inkqubo efanayo ukongeza/ukususa ulawulo olukude olongezelelweyo.

UKWENZA INKQUBO OLAWULO OLUTSHA

Landela imiyalelo phantsi kwecandelo 1. Iperi / Suipair Control Remote

UKULUNGISA Isantya semoto

YONYUSA Isantya semoto

• a. Cinezela iqhosha elinye "P2" de motor jog x1 kunye beep x1.
• b. Cofa iqhosha elithi “Phezulu” kude kube yi-motor jog x1 kunye ne-beep x1.
• c. Kwakhona, cofa iqhosha elithi “Phezulu” kude kube yi-motor jog x2 kunye ne-beep x1.

*Ukuba i-motor ayinampendulo, sele inesantya esiphezulu okanye esisezantsi.

YEHLISA Isantya semoto

• a. Cinezela iqhosha elinye "P2" de motor ibaleka x1 kwaye beeps x1.
• b. Cofa iqhosha elithi “Phantsi” de imotor jogs x1 kunye neebeps x1.
• c. Kwakhona, cofa iqhosha elithi “Phantsi” de i-motor jogs x2 kunye ne-beep x1.

*Ukuba i-motor ayinampendulo, sele inesantya esiphezulu okanye esisezantsi.

ISIKHOKELO ESIKHAWULEZAYO

UKULUNGISA INGXAKI

INGXAKI – I-MOtor IBHIPHA IXESHA LE-10 XA ISEBENZA

Unobangela
Ibhetri ivoltage isezantsi/ Umba wePaneli yeSolar

Isisombululo
Recharge with AC adapter or check connection and positioning of solar panel

PROBLEM – THE MOTOR WILL NOT PR Solution OGRAM OR CONNECT

Unobangela

• Jonga ukuba injini kwiMowudi yokuLala
  Press the P1 button on the motor for 2 seconds to activate Pairing Mode.
• IiMotor ezininzi zidityaniswe ngokufanayo
  Soloko ugcina isitishi ukwenzela inkqubo. Ukusebenza kwinjini enye ngexesha, beka zonke ezinye iinjini kwimowudi yokulala. Cinezela iqhosha elithi "P1" (malunga nemizuzwana emi-6) kwintloko yemoto de i-motor jogs x2 kunye ne-beep x2.

IZIBHENGEZO

Ukuthotyelwa kweFCC yeRadio yase-US
Esi sixhobo sithobela iCandelo le-15 leMithetho yeFCC. Umsebenzi uxhomekeke kwezi meko zimbini zilandelayo:

1. Esi sixhobo asinakubanga uphazamiseko oluyingozi, kunye
2. Esi sixhobo kufuneka samkele naluphi na uphazamiseko olufunyenweyo, kubandakanywa uphazamiseko olunokubangela ukusebenza okungafunekiyo.

Esi sixhobo sivavanyiwe kwaye safunyanwa sithobela imida
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Jongisa kwakhona okanye uhambise i-eriyali efumanayo.
• Yandisa ukwahlukana phakathi kwesixhobo kunye nomamkeli.
• Qhagamshela izixhobo kwindawo yokuphuma kwisekethe eyahlukileyo kuleyo apho umamkeli aqhagamshelwe khona.
• Dibana nomthengisi okanye igcisa likanomathotholo/kumabonakude ukuze ufumane uncedo.

Naluphi na uTshintsho okanye uhlengahlengiso olungavunywanga ngokucacileyo liqela elinoxanduva lokuthotyelwa lunokuphelisa igunya lomsebenzisi lokusebenzisa isixhobo.

ISED RSS Isilumkiso
Esi sixhobo sithobela i-Innovation, iNzululwazi kunye noPhuhliso loQoqosho lwaseKhanada-ilayisensi yomgangatho we-RSS. Umsebenzi uxhomekeke kwezi meko zimbini zilandelayo:

1. Esi sixhobo asinakubanga ukuphazamiseka, kwaye
2. Esi sixhobo kufuneka samkele naluphi na uphazamiseko, kuquka uphazamiseko olunokubangela ukusebenza okungafunekiyo kwesixhobo.

UKUTSHAJA KUNYE NEZIBONISO ZEBHETRI

IBHETRI YANGANGAPHAKATHI EHLAWUZWAYO
Ngexesha lokusebenza, ukuba i-motor iqala ukubethelwa, esi sisalathisi sokwazisa abasebenzisi ukuba amandla emoto aphantsi kwaye kufuneka ahlawulwe. Ukutshaja, qhaga i-micro-USB port kwi-motor kwi-5V/2A tshaja.

IPEKI YEBHATHA ENOKUTSHAZWA NGAPHANDLE
Ngexesha lokusebenza, ukuba voltagI-e ifunyenwe iphantsi kakhulu, ibhetri iyayeka ukusebenza kwaye ifuna ukutshajwa kwakhona. Ukutshaja, qhagamshela i-micro-USB port ekupheleni kwebhetri pack kwitshaja ye-5V/2A.

Ukulahlwa

• Musa ukulahla inkunkuma ngokubanzi.
• Nceda uhlaziye iibhetri kunye neemveliso zombane ezonakeleyo ngokufanelekileyo.

Amaxwebhu / Izibonelelo

SelectBlinds 15 Channel Remote Control Programming [pdf] Isikhokelo somsebenzisi 15 Channel Remote Control Programming, Remote Control Programming, Control Programming, Programming

Iimbekiselo

• Incwadi yokusebenzisa