ROGA Instruments MF710 Hemispherical Array for Sound Power
Guqula iMbali
| Inguqulelo | Umhla | Iinguqu | Phatha nge |
|
1.0 |
2016.09.01 |
Inguqulelo yokuqala |
Zhang Baojian,
UJason Qiao |
LE NKQUBO, KUBANDAKANYA AMAXWEBHU KUNYE NAYE NAYIPHI NA IINKQUBO EZINXULUMENE NEKHOMPYUTHA, ZIKHUSELEKILE NGELUNGELO LOKUKHUPHELA LULAWULO YI-BSWA. ONKE AMALUNGELO AGEDIWE. UKUKOPISHA, UKUBANDAKANYA UKUVELA KWAKHONA, UKUGCINWA, UKUHLANGANISA OKANYE UKUGUQULWA, NAYIPHI NA OKANYE ZONKE ZALE MBONISELO KUFUNA IMVUME EBHALWE NGAPHAMBILI YE-BSWA. LE NKCAZELO IKUFUMANA ULWAZI OLUYIMFIHLO, ENGANOKUCHAZWA KWABANYE NGAPHANDLE KWEMVUME EBHALWEYO NGAPHAMBILI YE-BSWA.
Intshayelelo
Inkcazo ngokubanzi
I-MF710 / MF720 yi-hemispherical array eyilwe yi-BSWA yokulinganisa amandla esandi. I-MF710 ihlangabezana nemfuneko ye-10 indlela yemakrofoni ngokwe-GB 6882-1986, ISO 3745:1977, GB/T 18313-2001 kunye ne-ISO 7779:2010. I-MF720 ihlangabezana nemfuneko ye-microphone ye-20 indlela ngokwe-GB/T 6882-2008, ISO 3745:2012.
I-MF710 / MF720 yayiyilwe njengencinci, ilula kwaye kulula ukuyidibanisa. Imakrofoni inokunyuka kumphezulu we-hemispherical ngokukhawuleza nangokuchanekileyo, ukuze ngokuhambelana neemfuno ezisemgangathweni zokulinganisa amandla esandi kuba lula kakhulu. I-BSWA ikwabonelela ngesixhobo sokufunyanwa kwedatha yamajelo amaninzi kunye nesoftware yokusebenza kunye nesixhobo sokulinganisa amandla esandi.
Iimbonakalo
- Ukuhlangabezana neemfuno ze-GB/T 6882, ISO 3745, GB/T 18313, ISO 7779
- Imakrofoni inokuhamba ecaleni kwendlela ukuhlangabezana ne-10 kunye ne-20 indlela yemakrofoni
- Iimakrofoni zodidi olwahlukeneyo ezine-1/2 intshi ngaphambiliampI-lifier inokuba yintaba
- Inokulungiswa phantsi okanye ixhonywe ukufakela
- Kulula ukucingelwa, ubunzima obulula kunye nesakhiwo esihlangeneyo, esibonelelwa ngebhokisi yokupakisha yobuchwephesha
- Ifanelekile ukulinganisa amandla esandi kwibhubhoratri nangaphandle
Inkcazo
| Inkcazo | ||
| Uhlobo | MF710-XX1 | MF720-XX1 |
|
Umgangatho |
GB 6882-1986, ISO 3745:1977
GB/T 18313-2001, ISO 7779:2010 |
GB/T 6882-2008, ISO 3745:2012 |
| Isicelo | Imakrofoni eyi-10 yaMandla oSandi | Imakrofoni eyi-20 yaMandla oSandi |
| Imakrofoni | Imakrofoni 1/2” | |
| Irediyasi | Ngokuzikhethela: 1m / 1.5m / 2m | |
| Ubunzima (kuphela
uluhlu lwe-hemispherical) |
-10: 6.8kg / -15: 10.9kg / -20: 17.7kg | -10: 6.8kg / -15: 10.9kg / -20: 17.7kg |
| Ubungakanani beBhokisi yokuPakisha (mm) | -10: W1565 X H165 X D417
-15: W 2266X H165 X D566 -20: W1416 X H225 X D417 |
|
Qaphela 1: -XX yiradiyasi yokulungiswa. -10 = radius 1m, -15 = radius 1.5m, -20 = radius 2m
Uluhlu lokupakisha
| Hayi. | Uhlobo | Inkcazo | |||
| Umgangatho | |||||
|
1 |
MF710 / MF720 I-Hemispherical Array yaMandla oSandi |
Iyunithi yokuxhoma | Iipcs ezingama-1. | ||
| Icwecwe eliphakathi | Iipcs ezingama-1. | ||||
| Umkhondo | Iipcs ezingama-6. | ||||
| Ukulungisa Ring | Iipcs ezingama-6. | ||||
|
2 |
Izincedisi1 |
Zonke zibandakanyiwe | Screw M10*12 | iipcs ezi-10 | |
|
Irediyasi 1m |
Screw M5*20 | iipcs ezi-20 | |||
| Screw M6*10 | iipcs ezi-4 | ||||
| I-radius 1.5m/2m |
Screw M6*20 |
iipcs ezi-20 |
|||
|
Irediyasi 2m |
Screw M5 * 25 Spring gasket M5
I-Nut M5 |
Iseti e-50 |
|||
| Zonke zibandakanyiwe | Isitshini | Iseti e-1 | |||
| 3 | Incwadi yokusebenzisa | Umyalelo wokusebenza | |||
| 4 | Ibhokisi yokuPakisha | Ifanelekile isithuthi | |||
| Ukhetho | |||||
|
5 |
IMPA201
1/2“Imakrofoni |
MF710 | Iipcs ezingama-10. | ||
| MF720 | Iipcs ezingama-20. | ||||
|
6 |
FC002-X2
Isidibanisi sokulungisa imakrofoni |
MF710 | 10 iipcs. Lungisa imakrofoni kwindlela. | ||
| MF720 | 20 iipcs. Lungisa imakrofoni kwindlela. | ||||
|
7 |
CBB0203 20m iCable ye-BNC |
MF710 |
10 iipcs. Qhagamshela imakrofoni ekufumaneni idatha | ||
|
MF720 |
20 iipcs. Qhagamshela imakrofoni kwidatha
ukufumana |
||||
| Qaphela 1: Izixhobo ziquka i-socket wrench kunye ne-screw. Inikezelwe ngezinye izikrufu ezininzi ukukhusela ilahleko okanye umonakalo. I-Screw M5 * 25, i-spring gasket M5 kunye ne-nut M5 isetyenziselwa ukudibanisa umkhondo we-array kunye ne-radius 2m.
Qaphela 2: FC002-A esetyenziselwa uluhlu lweradius 1m, FC002-B esetyenziselwa iradius 1.5m uluhlu, FC002-C esetyenziselwa iradius 2m uluhlu. Isidibanisi sokulungisa imakrofoni ayinakuba yendalo yonke. Qaphela 3: Ubude obuqhelekileyo buzimitha ezingama-20. UmThengi unokuchaza ubude xa uyala. |
|||||
I-MF710 ecetyisiweyo nge-10-channel yokufunyanwa kwedatha: MC38102
I-MF720 ecetyisiweyo nge-20-channel yokufunyanwa kwedatha: MC38200
Isoftware: VA-Lab BASIC + VA-Lab Power
Indibano yeFixture
ICandelo lilonke
| 1 | Iyunithi yokuxhoma |
| 2 | Icwecwe eliphakathi |
| 3 | Umkhondo |
| 4 | Ukulungisa Ring |
|
5 |
Imakrofoni yeFC002
Ukulungisa iConnector |
| 6 | Imakrofoni |
Track Pre-Assembly
Umzobo.3 MF710-20 / MF720-20 Track Assembly
I-MF710-20 kunye ne-MF720-20, i-radius eyi-2 m, kufuneka ihlanganise umzila ogobileyo ngenxa yokuba yayiyilwe ukuba yenziwe ngamacandelo amabini. Umkhondo weradiyasi 1m kunye ne-1.5m awukwazi ukwahlula ngoko akukho mfuneko yokuba udityaniswe kwangaphambili.
Indlela yokudibanisa kukufumana umzila ophawulwe ngonobumba ofanayo kwaye udibanisa kunye ne-splints kunye nezikrufu.
Umkhondo kunye neNdibano yePlati ePhakathi
Xhuma umkhondo kwipleyiti ephakathi njengoko kubonisiwe kwi-Fig.4 kunye neFig.5. Faka ingoma kwipleyiti esembindini kwaye usebenzise isikrufu sokuqhobosha (izikrufu ezithathu kwingoma nganye). Iyunithi yokuxhoma kufuneka ixhonywe ngokuqinileyo njengoko kubonisiwe kumfanekiso.
Phawula: Ingoma mayifakwe ngokulandelelana kwealfabhethi ngonobumba ophawulwe entloko nasekupheleni kwengoma.
Phawula: Iyunithi yokuxhoma kufuneka ixhonywe ngokuqinileyo ngokwaneleyo ukuze kuthintelwe ukonakala uluhlu ngelixa uphakamisa.
Lungisa i-Microphone kunye ne-FC002 Microphone Fixing Connector
Ufakelo lwe-Microphone yokulungisa ikhonkco libhekisela kwi-Fig.6 (konke ukuya kwicala elifanayo).
Imiphetho yangaphakathi nangaphandle yengoma iphawulwe ngeendawo zokubeka ukubonisa indawo yemakrofoni. Imiphetho yangaphakathi ifakwe njengendlela ye-microphone ye-10, kwaye imiphetho yangaphandle ifakwe njengendlela ye-microphone ye-20. Indawo nganye yokubeka imayikrofoni inophawu lwenombolo, kwaye isinxibelelanisi seFC002 sisekwanefestile yekliphu ehambelanayo.
- Ukulungelelanisa ifestile yekliphu yangaphakathi kunye ne-slot yangaphakathi, xa usebenzisa indlela ye-microphone ye-10;
- Ukulungelelanisa ifestile yekliphu yangaphandle kunye ne-slot yangaphandle, xa usebenzisa indlela ye-microphone ye-20.
Emva kokumisela indawo yeFC002, qinisa i-nut yokulungisa.
Faka i-microphone kwi-FC002 kwaye uqinise i-lock nut, uze udibanise ngeentambo.
Ukulungisa Ring
Hlanganisa indandatho yokulungisa ngokweFig.8 kwaye ubeke phantsi. Emva koko faka isiphelo ngasinye somzila kwi-slot ye-ring yokulungisa, kunye ne-fastening nut ukulungisa njengoko kuboniswe kwi-Fig.9.
Phawula: Xa uphakamisa uluhlu kunye neyunithi yokuxhoma, ukudibanisa phakathi komkhondo kunye neringi yokulungisa kufuneka kususwe. MUSA ukuphakamisa uluhlu kunye neringi yokulungisa kunye.
Indawo yeMakrofoni
Inkxaso ye-Hemispherical array i-10 kunye ne-20 indlela yokuvavanya imakrofoni, indawo ye-microphone ibonisa kwi-Fig.10 kunye ne-Fig.11. Indawo yemakrofoni ephawulwe njenge-slot kwincam yangaphakathi nangaphandle yengoma enophawu lwenombolo.
Umzobo we-11 Isikhundla se-Microphone ye-20 ye-Microphone Method
● Ukubeka imayikrofoni kwicala elijongene nalo
〇Indawo zemakrofoni kwicala elikude
I-Microphone Axial Position Adjustment
Isikhundla se-axial ye-microphone kufuneka silungelelanise ngononophelo, ukuqinisekisa ukuba umgama phakathi kwe-microphone nganye kunye nesixhobo esiphantsi kovavanyo sinokuhlangabezana nemfuneko yomgangatho.
Indawo ye-axial yeemfuno zemakrofoni ibonisa ngolu hlobo lungezantsi:
| Uhlobo | A | B1 | C1 | Phawula |
| MF710-10 / MF720-10 | 1000mm | 35mm | 22mm | Ireyidi yemitha eyi-1 |
| MF710-15 / MF720-15 | 1500mm | 25mm | 12mm | Ireyidi yemitha eyi-1.5 |
| MF710-20 / MF720-20 | 2000mm | 25mm | 16mm | Ireyidi yemitha eyi-2 |
| Qaphela 1: Apho kunokwenzeka, yanelisa umgama A njengowona mba uphambili uphezulu. Umgama B
kunye no-C zezereferensi kuphela. |
||||
Amanqaku oMsebenzi
- Imakrofoni yomlinganiselo licandelo elibuthathaka, nceda ulisebenzise ngononophelo. Imeko yokusingqongileyo ye-microphone efunekayo kufuneka iqinisekiswe. Gcina i-microphone kwibhokisi eqhotyoshelweyo enokuyikhusela kumonakalo ovela ngaphandle.
- Nceda ulandele intshayelelo kunye nokusebenzisa inyathelo kwincwadana yomsebenzisi. MUSA ukuyiwisa, ukuyinkqonkqoza okanye uyishukumise imveliso. Nawuphi na umsebenzi ongaphaya komda unokuyonakalisa imveliso.
Iwaranti
I-BSWA inokubonelela ngenkonzo yewaranti ngexesha lewaranti. Icandelo linokutshintshwa ngokumiselwa kwe-BSWA ukusombulula umba obangelwa zizinto eziphathekayo, uyilo okanye ukwenziwa.
Nceda ubhekisele kwisithembiso sewaranti yemveliso kwisivumelwano sokuthengisa. Musa ukuzama ukuvula okanye ukulungisa isixhobo ngumthengi. Nakuphi na ukuziphatha okungagunyaziswanga kuya kubangela iwaranti yelahleko yale mveliso
Inombolo yefowuni yeNkonzo yoMthengi
Nceda ungathandabuzi ukuqhagamshelana nathi ngawo nawuphi na umba:
| Inkonzo eyenzelwe
Inombolo yomnxeba: |
+86-10-51285118 (workday 9:00~17:00) |
| Inkonzo yokuthengisa
Inombolo yomnxeba: |
Nceda undwendwele iBSWA webindawo www.bswa-tech.com ukufumana inombolo yokuthengisa yommandla wakho. |
I-BSWA Technology Co., Ltd.
Igumbi 1003, North Ring Centre, No.18 Yumin Road,
Xicheng District, Beijing 100029, China
Inombolo yomnxeba: 86-10-5128 5118
Ifeksi: 86-10-8225 1626
I-imeyile: info@bswa-tech.com
URL: www.bswa-tech.com
Amaxwebhu / Izibonelelo
 |
ROGA Instruments MF710 Hemispherical Array for Sound Power [pdf] Incwadi yokusebenzisa MF710, MF720, MF710 Hemispherical Array for Sound Power, MF710, Hemispherical Array for Sound Power, Hemispherical Array, Array |
