IRECTORSEAL SS1 Inline Primary Float Switch

Ulwazi lweMveliso

Uluhlu lwamacandelo
(1) I-Cap / Float Subassembly (ibandakanya i-Stem / Wire, ii-Cam Locks ezimbini, Umnqwazi, uDapha)
(2) Tye
(3) Isixhobo sokucoca
(4) Isincamathelisi sesilumkiso (asiboniswanga)

Imiyalelo yokuFakela:

INombolo yePatent yase-US 6,442,955 & 10,406,570

Isaziso: Ukungaphumeleli ukufunda kunye nokuthobela zonke izilumkiso, izilumkiso kunye nemiyalelo phambi kokuqaliswa kofakelo kunokubangela ukwenzakala kunye / okanye umonakalo wepropathi kwaye kutshitshise iwaranti. Qaphela: esi sixhobo sisebenza kunye neepayipi zombini ze-3/4 kunye ne-1.

Ukusetyenziswa kunye nepayipi ye-drain ye-1, yongeza i-1 x 3/4 i-socket couplings (engabandakanyi) kwiiphelo ze-SS1.

Imiyalelo yokusetyenziswa kwemveliso

Imiyalelo ye-3/4 yoMbhobho wokuKhusela

1. Isiqu/Isitshixo seCam yocingo
2. I-Cap Float
3. Ubude bulungiselelwa ukusetwa kovakalelo
4. Isingeniso
5. Slayida uye ezantsi
6. Iivenkile zokucoca izixhobo ezingaphakathi kumzimba we-SS1
7. Qhagamshela kwisixhobo sokucinezela okanye sokufunxa
8. Indawo yokuphuma

I-WIRING
UkuTshintsho

Ucingo lweNut	Ukusuka kwiThermostat
Bomvu	Mhlophe
Luhlaza	Lubhelu

INGCACISO

24-Volts A/C, Ubuninzi 1.25 Amp. Ukuthwala umthamo, 6ft., 18 AWG iiNcingo zokukhokela.

I-Safe-T-Switch SS1 Assembly

Ubungakanani	Inombolo yomzobo	Umhla	UREV
A	I-ASB00449	5/8/2020	01-001-A

Iwaranti enyiniweyo
Yenziwe nguRectorSeal, LLC 2601 Spenwick Drive Houston, TX 77055, USA 800-231-3345 Ifeksi 800-441-0051
rectorseal.com

Inkcazo

ISafe-T-Switch® Model SS1 ifakwe ngaphakathi. Umtshini wengcongolo onelungelo elilodwa lomenzi wechiza unokufakwa kwithambeka ukuya kuthi ga kwi-45 °. I-switch cap ye-SS1 isuswa ngokulula ukucoca kunye nokusevisa imigca ye-condensate drain.

Uludwe Lwecandelo: (Umfanekiso 1)

1.  I-Cap/Float Subassembly (ibandakanya i-Stem/ingcingo, izitshixo ze-Cam ezimbini, i-Cap, i-Float)
2.  Tshini
3.  Isixhobo sokucoca
4.  Isincamathelisi sesilumkiso (asiboniswanga)

Imiyalelo yokuFakela

Isaziso: Ukungaphumeleli ukufunda nokuthobela zonke izilumkiso, izilumkiso kunye nemiyalelo phambi kokuqaliswa kofakelo kunokubangela ukwenzakala kunye/okanye umonakalo wepropathi kwaye kutshitshise iwaranti. Qaphela: esi sixhobo sisebenza nge-3/4″ kunye ne-1″ yombhobho wokukhupha amanzi.
Ukusetyenziswa nge-1″ yombhobho wokukhupha amanzi, yongeza i-1″ x 3/4″ yokudibanisa i-socket (ayiqukwanga) kwiziphelo ze-SS1.
IMIYALELO YO-3/4″ YIKHIPHA IMIbhobho

1.  Susa umbane kwiyunithi ye-air conditioner (A/C) kwindawo yolawulo engundoqo.
2.  Gxumeka i-¾” stub (engabandakanywa) kwi-adaptha ye-pan yokukhupha amanzi.
3.  Ncamathelisa i-Tee inlet kwi-¾” stub (Qaphela ukuba iTee ayilathi cala). I-Tee inokuthambeka ukuya kubuninzi be-45 ° ukusuka kwi-pan outlet.
4.  Gcoba i-Tee outlet kumgca wedrain osezantsi.
5.  Vavanya yonke imibhobho yamanzi kunye nokudibanisa imibhobho evuzayo.
6.  Ucingo lokutshintshela ngokwemiyalelo phantsi kwe-WIRING (Fig 7).
7.  Jikelezisa iiCam Locks ezimbini kwindawo YOKUVULA (Umfanekiso wesi-2). Susa iCap/Float Subassembly kwiTee. Vavanya iswitshi ngokuphakamisa iFloat ngelixa iyunithi isebenza. Ukuba intambo ifakwe ngokuchanekileyo, iyunithi yeA/C iya kuma.
8.  Khusela i-Cap/Float Subassembly (A) Beka i-Cap/Float Subassembly kwi-Tee, emva koko ujikelezise ii-Cam Locks ezimbini kwi-LOCK isikhundla (Fig 3). MUSA UKUNCAMISA ICAP/FLOAT NGOKUHLANGANISA NGENXA YETEE. (B) Kucetyiswa ukutyhala iSithi kwindawo esezantsi ukuze kubonwe uvakalelo lwamanzi kakhulu (Umfanekiso 4). Ukuba ubuntununtunu bufuna ukulungiswa, shenxisa isikhondo usinyuse okanye usihlise ngokufanelekileyo.
9.  Uvavanyo lokutshintsha ubuntununtunu: Iplagi idreyini ezantsi ukusuka kwindawo yofakelo kwaye usebenzise iyunithi yeA/C ukuze ugcwalise ipani yokukhupha. Ukudada kufuneka kuphakame kwaye iyunithi ye-A/C kufuneka ime phambi kokuba ipani yokuphuphuma. (A) Ukuba i-pan iyaphuphuma, yandisa uvakalelo lokutshintsha ngoku: 1 - Shifting yonke indibano ezantsi, okanye i-2 - Ukutyhala i-Stem phantsi. (B) Ukuba iyunithi iyayeka ngokukhawuleza okanye rhoqo, nciphisa uvakalelo lokutshintsha ngoku: 1 -Shifting yonke indibano phezulu, okanye i-2 - Ukutsala i-Stem phezulu.
10.  Indawo ibandakanyiwe Isincamathelisi sesilumkiso kwindawo ebonakalayo, njengesibambi somoya okanye iyunithi yecondenser.

Ukupakishwa

• Ikhowudi 97085
• Ubungakanani obukhuselekileyo-T-Tshintsho SS1
• Qty. ngokwe Case 24
• lbs. ngokwe Case 11
• Cubic Ft ngeCase ngalinye 1.01

I-WIRING

1.  Susa umbane kwiyunithi ye-A/C kwindawo yolawulo ephambili phambi kokuba wenze umsebenzi wombane.
2.  Ukuba ayikho, kucetyiswa ukuba i-inline fuse ifakwe ukukhusela isekethe ye-24-volt kunye nokulibaziseka kwexesha kulungiselelwe ukuphepha ukujikeleza ngokukhawuleza kwezixhobo.
3.  Khangela intambo ye-24-volt ye-thermostat engena kwiyunithi yesibambi somoya.
4.  Nqamula okanye usike ucingo olubomvu kwaye uqhagamshele ukutshintshela ilothe usebenzisa i-wire nut. Qhagamshela enye isikhokelo sokutshintsha kwitheminali yesibambi somoya. Ukubandakanya ukutshintsha kwisekethe ebomvu kuvala iyunithi yonke. Ukuba ibekwe kwisekethe ephuzi, i-fan iyaqhubeka iqhuba (ukuthintela ukukhula kwesikhunta ngexesha elide lokungabikho).
5.  Phinda uqhagamshele amandla kwiyunithi yeA/C.
   INGCACISO
   24-Volts A/C, Ubuninzi 1.25 Amp. Ukuthwala umthamo, 6ft., 18 AWG iiNcingo zokukhokela.

UKULONDOLOZA

Vula i-Subassembly ye-Cap / Float ukuze uhlole, ucoce kwaye uvavanye esi sixhobo ubuncinane rhoqo emva kweentsuku ze-30 kwaye ulandele konke ukucocwa komgca we-drain.

1.  Susa i-Cap/Float Subassembly.
2.  Sula inkunkuma okanye nayiphi na eminye imiqobo ngaphakathi kweTee kunye nakwiCap/Stem Subassembly.
3.  Khangela nawuphi na umonakalo. Ukuba umonakalo uyabonwa, buyisela le mveliso entsha.
4.  Vavanya umsebenzi wokutshintsha ngokulandela iNyathelo 7-9 kwicandelo elithi "INSTALLATION IMIYALELO" ngasentla. Ukuba le mveliso ayiphumelelanga kuvavanyo lomsebenzi, yibuyisele ngentsha.
5.  Yongeza iRectorSeal's Nu-Line™ drain cleaner ukunqanda ukwakheka kwealgae kunye neeclogs.

Faka kwakhona kwaye ukhusele i-Cap/Stem Subassembly.
IMIYALELO YESIXHOBO YOKUCACISA
1. Cima iSixhobo sokuCoca kwi-Cap/Float Subassembly.

2. Susa iCap/Float Subassembly kwiTee.

3. Sula inkunkuma okanye nayiphi na eminye imiqobo engaphakathi kweTee.

4. Jongana nesixhobo sokucoca isixhobo (umzobo 5) ngokubhekiselele kumgca we-drain ukuze uhlanjululwe (mhlawumbi unyuka okanye usezantsi, kuxhomekeke apho ukuvaleka khona). Faka isiXhobo sokuCoca kwiTee.

5. Qhoboshela isixhobo sokucinezela (okanye sokufunxa) (esifana neRectorSeal Mighty Pump™, okanye iRectorSeal Lineshot™) kwindawo yokungena yeSixhobo sokuCoca. Impompo okanye ivacuum de uthintelo lususwe.

6. Vala ngokupheleleyo isixhobo soxinzelelo (okanye ukucoca) kwaye usikhuphe kwisiXhobo sokuCoca.

7. Susa i-Cleanout Tool kwi-Tee kwaye uyinamathisele kwi-Cap / Float Subassembly (Fig 6).

8. Faka iCap/Float Subassembly emva kwiTee. Jikelezisa izitshixo zeCam ezimbini kwindawo yokutshixa.

INGCACISO YOKHUSELEKO EBALULEKILEYO

1.  Esi sixhobo kufuneka sifakwe ngokungqongqo ngokuhambelana nemiyalelo yomenzi (ukuqinisekisa ukusebenza ngokufanelekileyo) kwaye ngokuhambelana nazo zonke iindawo ezisebenzayo zemibhobho yamanzi, i-drainage kunye neekhowudi zombane.
2.  Ingozi yokutshatyalaliswa kombane. Susa umbane phambi kokufaka le mveliso ukunqanda ukothuka kombane kunye/okanye umonakalo wesixhobo. Sebenzisa kwiKlasi yesi-2 (i-thermostat) isiphaluka kuphela, ingadluli kwi-24-volts, i-1.25 amps ukuphepha umonakalo okanye ingozi yomlilo.

 

1.  Esi sixhobo asizukubona iiclogs ezenzeka phezulu ukusuka kwindawo yofakelo.
2.  Ukuba ayikho, kucetyiswa ukuba i-fuse kunye nexesha lokulibaziseka kufakwe, ukukhusela isiphaluka se-24-volt kwaye ugweme ukujikeleza ngokukhawuleza kwezixhobo, ngaphambi kokufaka le mveliso.
3.  Le mveliso yenzelwe ukusetyenziswa emanzini kuphela. Ayiyokusetyenziswa xa kukho ulwelo olunokutsha okanye umphunga.
4.  Jonga kwincwadana yemigaqo yokusebenza yesixhobo se-HVAC efanelekileyo phambi kokufaka le mveliso.
5.  Musa ukusebenzisa kwiinkqubo ezimbini zecompressor.

Iwaranti enyiniweyo

I-RectorSeal, LLC yenza iWaranti ye-Limited Express ukuba xa imiyalelo yokugcina kunye nokuphathwa kweemveliso zethu ilandelwa siqinisekisa iimveliso zethu ukuba zingabi naziphene. ESI WARANTI ENGCACILEYO NGOKUCACILEYO KWINDAWO YASO NAYIPHI NA ENYE IZIQINISEKISO EZINGQIWEYO OKANYE EZINGQONGILEYO, KUHLANGANISA NASO NAsiphi na isiQinisekiso ESIXHONYIWEYO SOKURHWETHWA OKANYE UKULUNGELA NGENJONGO EKHETHEKILEYO, KUNYE NAYO NAYIPHI NA OMNYE UXANDUVA NGAPHANDLE KOMNTU. Elona ncedo lokwaphulwa kweWaranti ye-Limited Express iya kuba yimbuyekezo yexabiso lokuthenga. Lonke elinye ityala liyalahlwa kwaye alibandakanyi, kwaye i-RectorSeal, LLC ayisayi kuba noxanduva lomonakalo owenzekayo okanye obangelwayo.
Yenziwe ngu
IRectorSeal, LLC
2601 Spenwick Drive  Houston, TX 77055, USA  800-231-3345  Ifeksi 800-441-0051  rectorseal.com
Inkampani yeCSW Industrials. I-RectorSeal, iilogo kunye nezinye iimpawu zorhwebo ziyipropathi ye-RectorSeal, LLC, amahlakani ayo okanye umniki-layisenisi kwaye zikhuselwe yi-copyright, uphawu lwentengiso kunye neminye imithetho yepropathi enomgangatho ophezulu wokuqonda, kwaye ayinakusetyenziswa ngaphandle kwemvume. I-RectorSeal inelungelo lokutshintsha iinkcukacha ngaphandle kwesaziso sangaphambili. ©2020 RectorSeal. Onke Amalungelo Agciniwe. R50109-0620

Amaxwebhu / Izibonelelo

IRECTORSEAL SS1 Inline Primary Float Switch [pdf] Incwadi yoMnini I-SS1 iSwitshi yokuDanga ePhambili eNgaphakathi, i-SS1, iSwitshi yoKudada ePrayimari ePhambili, iSwitshi yoKudada, iTshintshe

Iimbekiselo

• Incwadi yokusebenzisa