RSD PEFS-EL Series Array Level Rapid Shutdown
Isikhokelo soFakelo

Ububanzi kunye Jikelele

Le ncwadana isetyenziswa kuphela kwi-PEFS-EL Series Array-level Rapid Shutdown.

Inguqulelo	Umhla	Phawula	Isahluko
V1.0	10/15/2021	Uhlelo lokuqala	–
V2.0	4/20/2022	Umxholo ulungisiwe	6 Ufakelo
V2.1	5/18/2022	Umxholo ulungisiwe	4 Imowudi yokuvala

1. Utshintsho okanye uhlengahlengiso olungachazwanga/lwamkelwa kule ncwadana lutshitshisa igunya lakho lokusebenzisa esi sixhobo.
2. I-PROJOY ayisayi kuthwala uxanduva ngawo nawuphi na umonakalo owenziweyo ngenxa yofakelo olungachanekanga lwemveliso kunye/okanye nokungaqondi kakuhle le ncwadana.
3. I-PROJOY inelungelo lokwenza naluphi na utshintsho kule ncwadana yemigaqo okanye ulwazi oluqulethwe apha nangaliphi na ixesha ngaphandle kwesaziso.
4. Akukho datha yoyilo efana ne-sampImifanekiso enikwe kule ncwadana inokuguqulwa okanye iphindwe kabini ngaphandle kwenjongo yokuzisebenzisa.
5. Ukuqinisekisa ukusetyenzwa kwakhona kwazo zonke izinto ezinokwenzeka kunye nonyango olufanelekileyo lokulahla amacandelo, nceda ubuyisele imveliso kwi-PROJOY ekupheleni kobomi.
6. Qwalasela inkqubo rhoqo (kanye kwiinyanga ezi-3) ukuba kukho iziphene.

ImiGaqo yoKhuseleko ebalulekileyo

Amacandelo kufakelo abonakaliswe kwivolthi ephezulutages kunye nemisinga. Landela le miyalelo ngononophelo ukuze unciphise ingozi yomlilo okanye yombane.
Le migaqo ilandelayo kunye nemigangatho ithathwa njengesebenzayo kwaye inyanzelekile ukuba ifundwe phambi kokufakelwa kwezixhobo zombane:

1. Uqhagamshelwano nesekethe engundoqo, Wiring kufuneka kwenziwe bu abasebenzi abaqeqeshiweyo abaqeqeshiweyo; I-wiring kufuneka yenziwe emva kokuqinisekiswa kokuqhawulwa ngokupheleleyo kokunikezelwa kombane wokungena; Ukufakwa kweentambo kufuneka kwenziwe emva kokufakwa kwe-breaker body.
2. ImiGangatho yamazwe ngamazwe: IEC 60364-7-712 Ufakelo lombane lwezakhiwo-Iimfuno zofakelo olukhethekileyo okanye iindawo-iSolar Photovoltaic (PV) iinkqubo zokubonelela umbane.
3. Imimiselo yokwakha yendawo.
4. Izikhokelo zombane kunye nokugqithisatagUkukhusela.

Phawula!

1. Kubalulekile ukugcina imida yevoltage kwaye yangoku kuzo zonke iimeko zokusebenza ezinokwenzeka. Kwakhona gcina engqondweni uncwadi olungomlinganiselo ochanekileyo kunye nobukhulu bekhebhuli kunye namalungu.
2. Ufakelo lwezi zixhobo lunokwenziwa kuphela ngabasebenzi bezobugcisa abaqinisekisiweyo.
3. Izicwangciso zeengcingo zoTshintsho loKhuseleko loMlilo zingafumaneka ekupheleni kwesi sikhokelo.
4. Yonke imisebenzi yokufakela kufuneka ivavanywe ngokuhambelana nomthetho ofanelekileyo wendawo ngexesha lofakelo.

Malunga nokuValwa ngokukhawuleza

3.1 Usetyenziso olucetywayo lokuValwa ngokukhawuleza
Ukuvala ngokukhawuleza kuphuhliswe ngokukodwa njengesixhobo sokukhusela ukufakwa kwe-photovoltaic yangoku (DC). I-DC disconnect switch isetyenziselwa ukukhupha iintambo zoqhagamshelo lofakelo kwimeko yonxunguphalo. Imeko enjalo yonxunguphalo inokuba kwimeko yomlilo.

3.2 Indawo ekuValwa kuyo ngokukhawuleza
Ukuvalwa okuKhawulezayo kufuneka kubekwe kufutshane neepaneli zelanga kangangoko kunokwenzeka. Ngenxa yokuvalwa kwayo, ukutshintshwa kukhuselwe kwiimpembelelo zangaphandle njengothuli kunye nokufuma. Lonke useto luhambelana ne-IP66 eyenza ukuba ilungele ukusetyenziswa ngaphandle xa ifuneka.

Imowudi yokuvala

Ukucima okuzenzekelayo

Vala ngokuzenzekelayo amandla e-DC eephaneli xa ufumanisa ubushushu bendawo bungaphezulu kwe-70 ℃.

Ukuvalwa kwamandla e-AC

Abacimi bomlilo okanye abanikazi bezindlu banokuvala ngesandla amandla e-AC ebhokisi lokuhambisa xa kukho imeko engxamisekileyo okanye inokucima ngokuzenzekelayo xa umbane we-AC ulahlekile.

Ukuvalwa kwesandla

Kwimeko yonxunguphalo, inokuvalwa ngesandla ngeNqanaba lePhaneli eKhawulezayo yoLawulo lokuValwa kweBhokisi.

Ukuvalwa kwe-RS485

Malunga ne-PEFS Array-level Rapid Shutdown

5.1 iNkcazelo yoMfanekiso

5.2 technical iparameter

Inani leepali	2	4	6	8	10	12	14	16	18	20
Imbonakalo
Isakhelo sokukala kwi(A)	16, 25, 32, 40, 50, 55
Ubushushu bokusebenza	-40 — +70°C
Ubushushu beFiducial	+40°C
Isidanga songcoliseko	3
Iklasi yokhuseleko	IP66
Imilinganiselo yolwandlalo(mm)	210x200x100		375x225x96			375x225x162
Imilinganiselo yokuhlohla(mm)	06×269		06×436

5.3 IiNdlela zokuKhetha iiNcingo

Inani leepali	2	4	6	8	10	12	14	16	18	20
Imbonakalo
I-3-core wire	I-1 '1.2m yobonelelo lwamandla e-AC
Intambo ye-MC4	4	8	12	16	20	24	28	32	36	40

Ukuhlohla

6.1 IiMfuno zoFakelo
Vula ibhokisi, khupha i-PEFS, funda le ncwadana, kwaye ulungiselele isikrudrayiva esinqamlezayo / esithe ngqo.

6.2 Amanyathelo oFakelo

1. Tsala isibiyeli esisezantsi semveliso kumacala omabini.
   
2. Nxiba isivalo sokutshintsha eludongeni.
   
3. Intambo yombane uqhagamshelo lwe-AC kwiitheminali.
   Umbala wocingo: Ngokweemfuno ezisemgangathweni zaseMelika naseYurophu -imigangatho yaseMelika:
   L: Mnyama; N: Mhlophe; G: Umgangatho weGreen Europe: L: Brown; N: Blue; G: Luhlaza&Mthubi
   Phawula!
   I-FB1 kunye ne-FB2 zisetyenziselwa ukubonisa ukude kunye nokucima iimeko zokutshintsha. Xa utshintsho luvaliwe, i-FB1 ixhunyiwe kwi-FB2; xa iswitshi ivuliwe, i-FB1 iyacinywa ku-FB2.
   I-resistor ikhethwe ngokuhambelana nomthamo wokubonelelatage, ukuqinisekisa ukuba umsinga wesekethe ungaphantsi komlinganiselo ohleliweyo wesibane seSalathi kunye ＜320mA
4. Xhuma iintambo zomtya kujongano.
   Phawula!
   Nceda ulandele amanqaku (1+, 1-, 2+, 2- ) ePV wiring.
5. Qaphela imeko-bume yokuhlohla (Jonga isikimu kwiphepha elilandelayo).
   Phawula!
   Musa ukuveza ukukhanya kwelanga.
   Musa ukubeka esichengeni semvula kunye nesigqubuthelo sekhephu.
   Indawo yokufakela kufuneka ibe neemeko ezilungileyo zokungenisa umoya.
   Musa ukudibana ngokuthe ngqo (ngokuqhubekayo) kwamanzi angenayo.
   
6. Umzobo
   

6.3 Uvavanyo

1. Inyathelo loku-1. Vula i-AC power circuit. I-PEFS iyavula.
   
2. Inyathelo 2. Linda umzuzu omnye. I-UPS iyabiza.
   
3. Inyathelo 3. Vala isekethe yamandla e-AC. I-PEFS iya kucima malunga nemizuzwana ye-7. Izibane ezibomvu ze-LED zicinyiwe.
   
4. Inyathelo 4. Vula i-AC power circuit. I-PEFS ivula kwimizuzwana eyi-8. Isibane esibomvu se-LED sivuliwe.
   
5. Inyathelo 5. Uvavanyo lugqityiwe.

Inkonzo yasemva kweentengiso kunye newaranti

Le mveliso yenziwe ngendlela ephucukileyo yolawulo lomgangatho. Kwimeko yesiphoso, iwaranti elandelayo kunye namagatya emva kwenkonzo ayasebenza.

7.1 Iwaranti
Kwisiseko sokuthotyelwa komsebenzisi kunye nokugcinwa kunye nokusetyenziswa kweenkcukacha ze-breaker, kubaphuli abanomhla wokuhanjiswa phakathi kweenyanga ze-60 ukususela ngoku kwaye izitywina zabo ziqinile, i-PROJOY iya kulungisa okanye ithathe indawo nayiphi na kwezi ziqhekeza ezonakalisiweyo okanye ezingenakusebenza ngokuqhelekileyo. ngenxa yomgangatho wokuvelisa. Nangona kunjalo, malunga neziphene ezibangelwa zezi zizathu zilandelayo, i-PROJOY iya kulungisa okanye ithathe indawo ye-breaker ngentlawulo nokuba iphantsi kwewaranti.

1. Ngenxa yokusetyenziswa gwenxa, ukuzilungisa, kunye nokugcinwa ngendlela engafanelekanga, njl.
2. Ukusetyenziswa ngaphaya kweemfuno zemilinganiselo esemgangathweni;
3. Emva kokuthenga, ngenxa yokuwa kunye nokulimala ngexesha lofakelo, njl.;
4. Iinyikima, imililo, ukubetha kwemibane, umthamo ongaqhelekangatages, ezinye iintlekele zendalo, kunye neentlekele zesibini, njl.

7.2 Inkonzo yasemva kweentengiso

1. Nceda uqhagamshelane nomthengisi okanye isebe lenkonzo emva kwentengiso yenkampani yethu kwimeko yokusilela;
2. Ngexesha lewaranti: Ukusilela okubangelwa yingxaki yokuvelisa yenkampani, ukulungiswa kwasimahla kunye nokutshintshwa;
3. Emva kokuba ixesha lewaranti liphelile: Ukuba umsebenzi unokugcinwa emva kokulungiswa, yenza ukulungiswa okuhlawulwayo, ngaphandle koko unokutshintshwa kunye nokuhlawula.

Qhagamshelana nathi

Iprojoy Electric Co., Ltd.
Thetha: +86-512-6878 6489
Web: https://en.projoy-electric.com/
Yongeza: umgangatho we-2, iSakhiwo 3, iNombolo ye-2266, i-Taiyang Road, iSithili sase-Xiancheng, eSuzhou

Amaxwebhu / Izibonelelo

PROJOY RSD PEFS-EL Series Array Level Rapid Shutdown [pdf] Isikhokelo soFakelo I-RSD PEFS-EL Series, iNqanaba loVavanyo oluKhawulezayo, Ukuvalwa okuKhawulezayo, ukuValwa kweNqanaba loVavanyo, Cima

Iimbekiselo

• Incwadi yokusebenzisa