UniLog Pro / UniLog Pro Plus kunye neCIM
Universal Process Data Recorder PC Software Version
UniLog Pro Temperature Data Logger
Incwadi yoMsebenzi
Le ncwadana imfutshane yenzelwe ireferensi ekhawulezayo kuqhagamshelo lweingcingo kunye nokukhangela iparameter. Ukufumana iinkcukacha ezithe vetshe malunga nokusebenza kunye nesicelo; nceda ungene ku www.ppiindia.net
| UMSEBENZI IIPARAMETER | |
| Iiparamitha | Iisetingi (Ixabiso eliMiselweyo) |
| 'Qala' Umyalelo we Ibhetshi yokurekhoda
(Iyafumaneka ukuba iBatch Recording ikhethiwe) |
Hayi Ewe |
| QALA IBHASHI>> NO | |
| 'Yeka' Umyalelo weBatch Recording (Iyafumaneka ukuba iBatch Recording ikhethiwe) | Hayi Ewe |
| I-BATCH STIP>> NO | |
UKUQWALASELWA KUKAWUPHAVA
Phawula: I-AII ezinye iiParameters ziphantsi koqwalaselo LWE-SUPERVISORY
| UKUSEKWA KWE-ALARM | |
| Iiparamitha | Iisetingi (Ixabiso eliMiselweyo) |
| Igama lesitishi leeSetingi zeAlam
KHETHA IJESHI>> Umjelo-1 |
Umsebenzisi ochaziweyo okanye amagama angagqibekanga etshaneli-1 ukuya kwitshaneli-8 / 16 (Okuhlala kukho: NA) |
| Khetha iAlam
KHETHA I-ALARM >> AL1 |
AL1, AL2, AL3, AL4
(Olona khetho lukhoyo luxhomekeke kumanani eeAlam ezisetwe ngetshaneli nganye Iphepha loqwalaselo lwe-alam) |
| Uhlobo lweAlarm
AL1 UHLOBO >> Akukho |
Akukho nkqubo iPhantsi iPhantsi (eMiyo : Akukho nanye) |
| I-Alarm Setpoint
AL1 ISEKO >> 0 |
Min. kuMax. yoluhlu olukhethiweyo lohlobo lwegalelo (Okuhlala kukho: 0) |
| I-Alarm Hysteresis
AL1 UBUHLUNGU >> 2 |
1 ukuya 3000 or
0.1 ukuya 3000.0 (Okuhlala kukho: 2 or 2.0) |
| I-Alarm Inhibit
AL1 INHIBIT >> Ewe |
Hayi Ewe
(Okuhlala kukho : Hayi) |
| UQINISEKISO LWESIXHOBO | |
| Iiparamitha | Iisetingi (Ixabiso eliMiselweyo) |
| Ixesha loHlaziyo lwesitishi kwiMowudi yokuSkena ngokuzenzekela
UMLINGO WOKUSKENA>> 3 |
1 Umz. ukuya ku-99 Sec. (Okuhlala kukho : 3 Sec.) |
| Isixhobo Inombolo yesazisi
I-ID YEREKHODI >> 2 |
1 ukuya 127 (Okuhlala kukho : 1) |
| Khetha Amanani ewonke amatshaneli
AMAJESHI EWONKE>> 16 |
8
16 (Okuhlala kukho : 16) |
| Cima Konke Okugciniweyo Iirekhodi
Cima IINGXELO>> Hayi |
Hayi Ewe (Okuhlala kukho : Hayi) |
| UQINISEKISO LWESHISHINI | |
| Iiparamitha | Iisetingi (Ixabiso eliMiselweyo) |
| Khetha Igama lesitishi
KHETHA ISHISHINI >> Ijelo-1 |
Umsebenzisi ochaziweyo okanye amagama angagqibekanga etshaneli-1 ukuya kwisitishi – 8/16
(Okuhlala kukho : NA) |
| Tsiba isitishi sokuBonisa
SKIP >> Hayi |
Hayi Ewe
(Okuhlala kukho : Ewe) |
| Uhlobo loNgeniso loMqondiso
UHLOBO LOKUFAKA>> Uhlobo K (Cr-Al) |
Jonga kwiTheyibhile yesi-2 (Ehlala ikho : Uhlobo K (Cr-Al) |
| ISigqibo sokuBonisa se I-PV elinganisiweyo
ISISOMBULULO>> 0.1 Iyunithi |
1 Iyunithi
0.1 Iyunithi 0.01 Iyunithi * 0.001 Iyunithi * (Ehlala ikho : 0.1 Iyunithi) (* ye4-20mA) |
| IiYunithi zokuBonisa zoMlinganiso wePV
IIUNITHI>> °C |
Jonga kwiTheyibhile 1 (Okuhlala kukho : °C) |
| Uluhlu oluphantsi (ye-4-20mA) UHLELO PHANTSI>> 0 | -19999 ukuya kwi-30000 Bala ngeSigqibo esiKhethiweyo (Okuhlala kukho: 0.0) |
| Uluhlu oluPhezulu
(ye-4-20mA) UDIDI ELIPHAKAMILEYO>> 1000 |
-19999 ukuya kwi-30000 Bala ngeSigqibo esiKhethiweyo (Okuhlala kukho: 100.0) |
| Faka iKliphu esezantsi kwiPV ebonisiweyo
(ye-4-20mA) I-CLIPPING EPHANTSI >> Khubaza |
Khubaza Yenza (Okuhlala kukho : Cima) |
| Seta kwangaphambili iNqanaba leKliphu esezantsi
(ye-4-20mA) I-CLIP VAL ELIPHANTSI>> 0.0 |
-19999 ukuya kuma-30000 (Okuhlala kukho : 0) |
| Faka iKliphu ePhezulu kwiPV ebonisiweyo
(ye-4-20mA) I-High CLIPPING >> Khubaza |
Khubaza Yenza (Okuhlala kukho : Cima) |
| Seta kwangaphambili iNqanaba leKliphu ePhezulu
(for 4-20mA) HIGH CLIP VAL>> 100.0 |
-19999 ukuya kuma-30000 (Okuhlala kukho : 100.0) |
| Zero Offset
ZERO OFFSET>> 0 |
-1999/3000 or
-1999.9/3000.0 (Okuhlala kukho : 0) |
| UKULUNGISWA KWE-ALARM | |
| Iiparamitha | Iisetingi (Ixabiso eliMiselweyo) |
| Iialam ngejelo ngalinye
I-ALAMMS / CHAN >> 4 |
1 ukuya 4
(Okuhlala kukho : 4) |
| Relay-1 Logic
RELAY-1 LOGIC >> Eqhelekileyo |
Ukubuyela umva okuqhelekileyo (Okumiselweyo : Kwesiqhelo) |
| Relay-2 Logic
RELAY-2 LOGIC >> Eqhelekileyo |
Ukubuyela umva okuqhelekileyo (Okumiselweyo : Kwesiqhelo) |
| UKULUNGISWA KWEREKHODI | |
| Iiparamitha | Iisetingi (Ixabiso eliMiselweyo) |
| Okuqhelekileyo Isithuba sokurekhoda
IXESHA ELIQHELEKILEYO>> 0:00:30 |
0:00:00 (H:MM:SS)
ukuya ku-2:30:00 (H:MM:SS) (Okuhlala kukho : 0:00:30) |
| Sondeza ukurekhoda Ikhefu
I-ZOOM INTERVAL>> 0:00:01 |
0:00:00 (H:MM:SS)
ukuya ku-2:30:00 (H:MM:SS) (Okuhlala kukho : 0:00:01) |
| Rekhoda isiZukulwana kwi-Alarm Status Toggle
I-ALARM TOGLE REC >> Khubaza |
Khubaza Yenza (Okuhlala kukho : Vulela) |
| Khetha Imo Yokurekhoda
INDLELA YOKUREKHODA >> Ngokuqhubekayo |
Iqela eliqhubekayo
(Okuhlala kukho : Ukuqhubekeka) |
| Ixesha lexesha lokuRekhodwa kweBatch (yemodi yeBatch kuphela)
IXESHA LEBHASHI>> 1.00 |
0:01 (HH:MM)
ukuya ku-250:00 (HHH:MM) (Okuhlala kukho : 1:00) |
| USEKO lwe-RTC | |
| Iiparamitha | Iisetingi |
| Seta Ixesha lekloko (HH:MM)
IXESHA (HH:MM)>> 15:53 |
0.0 ukuya ku-23:59 |
| Misela uMhla weKhalenda
UMHLA >> 23 |
1 ukuya 31 |
| Misela iNyanga yeKhalenda
INYANGA >> 11 |
1 ukuya 12 |
| Misela uNyaka weKhalenda
UNYAKA >> 2011 |
2000 ukuya 2099 |
| IZIBONELELO | |
| Iiparamitha | Iisetingi |
| Isitshixo esiPhezulu siVumele
TSHIXA>> Hayi VULA>> Hayi |
Hayi Ewe |
| UIM ehlala ikho
UIM OKWENZEKAYO >> Hayi |
Hayi Ewe |
| CIM ehlala ikho
I-CIM Emiselweyo >> Hayi |
Hayi Ewe |
| Yenza iCIM kunye ne-UIM zihambelane
CPY CIM TO UIM>> Akukho CPY UIM TO CIM>> Hayi |
Hayi Ewe |
| ULUHLU- 1 | |
| Ukhetho | Inkcazo |
| °C | Isidanga se-Centigrade |
| °F | Isidanga seFahrenheit |
| (akukho) | Akukho yunithi (Ayinanto) |
| °K | Isidanga uKelvin |
| EU | IiYunithi zobuNjineli |
| % | Ipesentitage |
| Pa | IiPascals |
| Mpa | IiMpascals |
| kPa | Kpascals |
| ibha | Ibha |
| mbar | Ibha yeMilli |
| psi | PSI |
| kg/sq.cm | kg/cm2 |
| mmH2O | mm igeyiji yamanzi |
| kwiH2O | I-intshi yegeyiji yamanzi |
| mmHg | mm imercury |
| Torr | Torr |
| ilitha ngeyure | Iilitha ngeyure |
| ilitha/min | Iilitha ngomzuzu |
| I-%RH | % Ubuntu bezizalwane |
| %O2 | % Ioksijini |
| CO2 | % Umoya omdaka |
| %CP | % Ukubakho kweKhabhoni |
| V | Iivolthi |
| A | Amps |
| mA | Mili Amps |
| mV | Milli Volts |
| ohm | Ohms |
| ppm | Amacandelo kwisigidi |
| rpm | Iinguqu ngomzuzu |
| mSec | Mili imizuzwana |
| Isiqendu | Imizuzwana |
| imiz | Imizuzu |
| hrs | Iiyure |
| PH | PH |
| %PH | %PH |
| imayile ngeyure | Iimayile ngeyure |
| mg | Milli grams |
| g | Iigram |
| kg | Ikhilo grams |
| ULUHLU- 2 | ||
| Ukhetho | Uluhlu (Ubuncinci ukuya kuMax.) | Isigqibo |
 |
0 ukuya +960 °C / +32 ukuya +1760 °F |
Zizinzile 1°C / 1°F |
 |
||
 |
||
|
|
0 ukuya +1771 °C / +32.0 ukuya +3219 °F |
|
 |
0 ukuya +1768 °C / +32 ukuya +3214 °F |
|
 |
||
 |
||
 |
Igcinelwe uhlobo oluthile lomthengi lweThermocouple olungadweliswanga ngasentla. | |
 |
-199 ukuya +600 °C / -328 ukuya +1112 °F
-199.9 ukuya or ukuya kuma-1112.0°F 600.0 °C / -328.0 |
Umsebenzisi usetatable 1°C / 1°F
okanye 0.1°C / 0.1°F |
|
|
19999 ukuya +30000 iiyunithi | Ukusetha komsebenzisi 1 / 0.1 / 0.01/
0.001 unts |
UKUSETYENZISWA KWE-ID NGAPHEZU KWE-1 CIM
Isebenza kuphela kwi-UNILOG PRO PLUS
IPHANSI LANGAPHAMBILI
|
Uphawu |
Isitshixo | Umsebenzi |
 |
IPHEPHA | Cofa ukungena okanye ukuphuma kwimo yokuseta. |
 |
PHANTSI |
Cinezela ukwehlisa ixabiso lepharamitha. Ukucofa kanye kunciphisa ixabiso ngokubalo olunye; ukubamba ucinezele isantya phezulu utshintsho. |
 |
UP |
Cofa ukwandisa ixabiso leparameter. Ukucofa kanye kwandisa ixabiso ngokubalo olunye; ukubamba ucinezele isantya phezulu utshintsho. |
 |
NGENA | Cinezela ukugcina ixabiso leparameter yokucwangcisa kwaye uskrolele kwiparameter elandelayo kwi PAGE. |
UKUQHAGAMSHELWA KOMbane
IMODULI YOMSEBENZISI WOMSEBENZI (UIM)
IZIBUKO LONXIBELELWANO LOKUQHUBEKA NE-CIM(ii)
Isebenza kuphela kwi-UNILOG PLUS
IISETHINGI ZOKUJUPHA
IINPUT-CHANNEL INTERFACE MODULE (CIM)
IISETHINGI ZOKUJUPHA
IINPUT-CHANNEL INTERFACE MODULE (CIM)
UKUQHAGAMSHELWA KOMbane
IMODULI YOMSEBENZI WESITHUTHULO (CIM) 
Amaxwebhu / Izibonelelo
 |
I-PPI UniLog yePro yeDatha yoBubushushu beLogger [pdf] Incwadi Yomyalelo I-UniLog Pro yokuLondoloza iDatha yoBubushushu, i-UniLog Pro, i-Logger yoBubushushu beDatha, i-Data Logger, i-Logger |
