AMANDLA PROBE I-PPPWM yePWM yeSignali yoMveliso weAdaptha yoMbane

Ijenereyitha yoMqondiso wePWM

APAC MGL APPA Corporation

• cs.apac@mgl-intl.com
• Umnxeba: +886 2-2508-0877

ECanada nase-USA

• Power Probe Group, Inc. cs.na@mgl-intl.com
• Umnxeba: +1 833 533-5899

EMEA

• Power Probe Group SLU cs.emea@mgl-intl.com
• Umnxeba: +34 985-08-18-70

I-MEXICO&LATAM

• Power Probe Group, Inc. cs.latam@mgl-intl.com
• Umnxeba: +1 833-533-5899

IUNITED KINGDOM

• Power Probe Group Limited cs.uk@mgl-intl.com
• Umnxeba: +34 985-08-18-70

1. Gxuma i-PPPWM kwi-4mm yebhanana ye-banana ye-PP yemveliso enikwa amandla yi-12V, kwaye udibanise i-grounding lug ye-PPPWM kumhlaba wemveliso ye-PP. Nceda uqinisekise ukuba umhlaba uthembekile kwaye akukho siseko sibi.
2. Qhagamshela i-terminal eqinisekileyo yesixhobo esiya kuqhutywa, njengefeni, kwisiphumo se-PWM TIP. Itheminali engeyiyo idityaniswe kumhlaba.
3. Cinezela i-ROCK SWITCH yemveliso yePP phambili kwaye ungayikhululi, amandla okuvelisa kwiPPPWM, kwaye emva koko isikrini sePPPWM sikhanyisa.
4. Ububanzi be-pulse ephumayo buhlengahlengiswa ngokucinezela iqhosha eliphezulu okanye elisezantsi le-PPPWM ukuqhuba i-fan ukujikeleza, njl.
5. I-PPPWM ingabonisa umthamo wombanetage. Cofa amaqhosha athi Phezulu naPhantsi ngaxeshanye ukutshintsha phakathi kwevoltagimowudi yokubonisa kunye nemowudi yokubonisa ububanzi bepulse. Qaphela ukuba ububanzi be-pulse abukwazi ukulungiswa kwi-voltage imo yokubonisa.

Iimpawu zoKhuseleko

• Ihambelana ne-UL STD. UL 61010-1, 61010-2-030; lntertek Certified to CSA STD. C22.2 No. 61010-1, 61010-2-030 5D21421
• I-CE ithobela imigangatho yokhuseleko yaseYurophu {EU).
• Umhlaba {umhlaba) TERMINAL

Amanqaku okusetyenziswa:

1. Musa ukusebenzisa imveliso yayo yangoku ngaphaya koluhlu olucacileyo, olunokubangela umonakalo kwi-PPPWM
2. Ixesha elide ukusebenza okuphezulu kwangoku kunokubangela i-PPPWM yokushisa kunye nokukhusela, kwaye isiboniso sibonakala "Er1" . Ukuthintela le meko, landela lo myalelo ungezantsi:
   • imveliso 0-5A (umsebenzi 0-100%), ubuninzi bexesha eliqhubekayo lokusebenza yi-30 min.
   • imveliso 5-10A {umsebenzi 0-100%), ubuninzi bexesha eliqhubekayo lokusebenza yi-30 sec. Iadaptha ifuna ubuncinane bemizuzu engama-20 yokuphumla emva kokusebenza ngokuqhubekayo. Umsebenzi unokuphindwa kuphela emva koko.
3. Ukuba umboniso ubonakala "ErO", le mpazamo ibonisa ukuba ucingo lomhlaba aluxhunyiwe ngokufanelekileyo. Nceda ujonge kwaye uqhagamshele ucingo lomhlaba ngokukhawuleza kwaye uqhagamshele i-PPPWM yomhlaba ilug ukuya kwicala elibi lonikezelo lwamandla. Ukuba umhlaba awuxhunyiwe, i-PPPWM yokuzikhusela iya kucima i-voltage yemvelisotage kunye nesitshixo siya kuba singasebenzi, kuba ukunyanzeliswa komsebenzi kwimeko yomhlaba odadayo (umthwalo onomhlaba kunye nomhlaba ngaphandle komhlaba) kunokonakalisa i-PPPWM. Nceda uyisebenzise emva kokusombulula ingxaki.
4. Xa udibanisa umthwalo omkhulu, qiniseka ukuba igalelo ngalinye kunye nesiphumo se-terminal kunye noqhagamshelo locingo luzinzile kwaye luthembekile ukunciphisa ubushushu obubangelwa kukuxhatshazwa koqhagamshelwano lokusetyenziswa kwamandla.
5. Le mveliso ifaneleka kuphela ukusetyenziswa koomatshini abane-jump-of-switch switch kunye ne-ROCK SWITCH, njenge-PP3, i-PP4, i-ECT800, i-ECT900, njl. Gxuma igalelo lamandla e-PPPWM kula mashini kwaye ubenzele amandla ngala matshini. Ngale ndlela ukutshintshwa kohambo lwangaphakathi lwangoku lwangoku lwaba matshini lubonelela ngokhuseleko oluhle lwe-PPPWM xa umthwalo uphezulu kakhulu, ukunciphisa amathuba okusebenza kakubi. Kwaye intambo yamandla kwezi klasi zeemitha nazo zinokubonelela ngokuphakamileyo okwaneleyo ngoku ukuqinisekisa ukhuseleko. Akuvumelekanga ukubonelela ngamandla kuyo ngokuthe ngqo ngebhetri yombane.
6. Le mveliso isebenza kuphela kwinkqubo yebhetri ye-12V yemoto, kungekhona kwinkqubo yebhetri ye-24V.
7. Musa ukusebenzisa esi sixhobo ukulinganisa ii-mains, singasebenzisa kuphela isekethe yemoto.
8. Ukusetyenziswa kwangaphakathi.
9. Ukuba isixhobo sisetyenziswe ngendlela engachazwanga ngumenzi, ukhuseleko olunikezelwa sisixhobo lunokonakala.

Iiparamitha zePPPWM zobugcisa kunye neempawu 

• Ubushushu bokusebenza : 0°c – 30°C {S80%RH)
  • 30°G. 40°G (S75%RH)
  • 40°G – 50°G (“45%RH)
• Ubushushu bokugcina: -10°C – 60°C (S80%RH)
• Ubude bokusebenza: :S2000m
• Imveliso yePWM: Ububanzi bepulse 0% -100% Frequency enkulu kuno 22KHz Ngoku ye 1 DA
• Isiphumo sokuchaneka kwePWM: +/-2%
• Ukunikezelwa kwamandla voltage: 12Vdc
• Ukusebenza ivoltagUluhlu: 8Vdc ukuya kwi-16Vdc
  Iinkcukacha ezongezelelweyo:

Isilumkiso:
Esi sincedisi sesoomatshini abaqeqeshelwe ngokufanelekileyo kunye nezakhono zobuchwephesha beemoto. Luxanduva lwegcisa ukuqonda inkqubo evavanywayo. Ngalo lonke ixesha bhekisa kwaye ulandele isithuthi okanye ulwazi lomenzi wesixhobo sokhuseleko kunye neenkqubo zovavanyo olusebenzayo phambi kokusetyenziswa. UNGAsetyenziswa kwiingxowa zomoya. Asinaxanduva lomonakalo kwisithuthi okanye iinxalenye ezibangelwa ukusetyenziswa okungafanelekanga.

Amaxwebhu / Izibonelelo

AMANDLA PROBE I-PPPWM yePWM yeSignali yoMveliso weAdaptha yoMbane [pdf] Incwadi yokusebenzisa I-PPPWM, i-PWM ye-Signal Generator, i-Adapter, i-PWM Signal Generator i-Adapter, i-adaptha ye-PPPWM, i-PPPWM ye-PWM ye-Adapter ye-Signal Generator, i-Adaptha ye-Signal Generator

Iimbekiselo

• Incwadi yokusebenzisa