OLIMEX ESP32-S3 LiPo Open Source Hardware Board Dev Kit User Manual
Intshayelelo kwi-ESP32-S3-DevKit-LiPo
I-ESP32-S3 yi-dual-core XTensa LX7 MCU, ekwaziyo ukubaleka kwi-240 MHz. Ngaphandle kwe-512 KB yayo ye-SRAM yangaphakathi, iphinda ifike kunye ne-2.4 GHz edibeneyo, i-802.11 b/g/n Wi-Fi kunye neBluetooth 5 (LE) uqhagamshelwano olubonelela ngenkxaso yoluhlu olude. Ine-GPIOs ecwangcisiweyo ye-45 kwaye ixhasa isethi ecebileyo yeeperipherals. I-ESP32-S3 ixhasa i-SPI flash enkulu, isantya esiphezulu se-octal, kunye ne-PSRAM eneenkcukacha eziqwalaselweyo kunye ne-cache yomyalelo.
ESP32-S3-DevKit-LiPo Ibhodi yibhodi yophuhliso ene-ESP32-S3 kunye nezi mpawu:
- ESP32-S3-WROOM-1-N8R8 8MB RAM 8 MB Flash
- Ubume obuluhlaza LED
- Yellow Charge LED
- Isidibanisi se-UEXT (pUEXT 1.0 mm inyathelo lesiqhagamshelanisi)
- Unikezelo lwamandla lwe-USB-C kunye ne-USB-Serial programmer
- I-USB-C OTG JTAG/Isidibanisi sothotho
- Itshaja yeLiPo
- Isidibanisi sebhetri yeLiPo
- Ingqiqo yamandla yangaphandle
- Umlinganiselo webhetri
- Ukutshintshela umbane ozenzekelayo phakathi kwe-USB kunye ne-LiPo
- SETHA kwakhona iqhosha
- USER iqhosha
- Imilinganiselo 56×28 mm
Iikhowudi zoku-odola ze-ESP32-S3-DevKit-Lipo kunye nezixhobo:
ESP32-S3-DevKit-LiPo Ibhodi yophuhliso ye-ESP32-S3 ene-USB JTAG/Debugger kunye neLipo tshaja
I-USB-CABLE-A-TO-C-1M Amandla e-USB-C kunye nentambo yokucwangcisa
LiPo iibhetri
UEXT abenzi boluvo kunye neemodyuli
I-hardware
Uyilo lwe-ESP32-S3-DevKit-LiPo:
ESP32-S3-DevKit-LiPo GPIOs:
UKUNIKEZWA AMANDLA:
Le bhodi inokunikwa amandla ngu:
+ 5V: EXT1.pin 21 ingaba igalelo okanye imveliso
I-USB-UART: Isixhumi se-USB-C
I-USB-OTG1: Isixhumi se-USB-C
LiPo ibhetri
Iimpawu ze-ESP32-S3-DevKit-Lipo:
ESP32-S3-DevKit-LiPo iskimu samva nje sivuliwe GitHub
UEXT isinxibelelanisi:
Isidibanisi se-UEXT simele isidibanisi soLwandiso lweHlabathi kwaye siqulathe +3.3V, GND, I2C, SPI, iimpawu ze-UART.
Isidibanisi se-UEXT sinokuba kwiimilo ezahlukeneyo.
Isidibanisi sokuqala se-UEXT yi-0.1” 2.54mm isidibanisi seplastiki esinenyathelo. Zonke iimpawu zinamanqanaba e-3.3V.
UEXT Isidibanisi
qaphela ukuba yabelana ngezikhonkwane ezifanayo ne-EXT1 kunye ne-EXT2
Njengoko iibhodi zisiba ncinci kwaye zincinci ezinye iipakethe ezincinci zaziswa kakhulu ecaleni kwesinxibelelanisi se-UEXT soqobo
- I-mUEXT yi-1.27 mm isidibanisi esinesihloko esinebhokisi enenqanaba elifanayo nele-UEXT
- I-pUEXT yi-1.0 mm isiqhagamshelanisi somqolo omnye (esi sisidibanisi esisetyenziswa kwi-RP2040-PICO30)
I-Olimex iphuhlise inani IIMODULI ngesi sidibanisi. Kukho ubushushu, ukufuma, uxinzelelo, imagnethi, izivamvo zokukhanya. Iimodyuli ezine-LCDs, i-matrix ye-LED, i-Relays, i-Bluetooth, i-Zigbee, i-WiFi, i-GSM, i-GPS, i-RFID, i-RTC, i-EKG, i-sensor kunye njl.
Iimpawu ze-pUEXT:
SOFTWARE
- Umfanekiso we-ESP32-S3-DevKit-Lipo Linux
- ESP32-S3-DevKit-LiPo Imiyalelo yokwakha iLinux ukusuka jcmvbkbc kunye Apha
- ESP32-S3-DevKit-Lipo Linux imiyalelo yokwakha ifomu ESP32DE
Imbali yohlaziyo
Uhlaziyo 1.0 Julayi 2023
Amaxwebhu / Izibonelelo
 |
OLIMEX ESP32-S3 LiPo Open Source Hardware Board Dev Kit [pdf] Incwadi yokusebenzisa ESP32-S3 LiPo Open Source Hardware Board Dev Kit, LiPo Open Source Hardware Board Dev Kit, Source Hardware Board Dev Kit, Hardware Board Dev Kit, Board Dev Kit, Dev Kit |
