PWM-120-12 Constant Voltage PWM Imveliso KNX LED Driver
“
IiNkcazo zeMveliso
| UMZEKELO | I-DC VOLTAGE | IRETHWE NGOKU | RATED AMANDLA | ULAWULO LOKUPHIMA | IPHUMO |
|---|---|---|---|---|---|
| PWM-120-12 | 12V | 10A | 120W | 0 ~ 100% | Imveliso ye-PWM ye-KNX ye-LED Driver |
| PWM-120-24 | 24V | 5A | 120W | 0 ~ 100% | Imveliso ye-PWM ye-KNX ye-LED Driver |
Imiyalelo yokusetyenziswa kwemveliso
Ukuhlohla
1. Qinisekisa ukuba amandla egalelo angaphakathi kwevolthi echaziweyotagUluhlu
(90-305VAC, 127-431VDC).
2. Qhagamshela umqhubi kwindlela yokukhanyisa ye-LED elandelayo
i-polarity echanekileyo.
Izicwangciso zokufiphaza
1. Sebenzisa isoftware ye-ETS ukunyenyisa i-frequency ye-PWM ngaphakathi kwe
uluhlu lwe-200-4000Hz.
2. Uluhlu lwe-Dimming lunokusetwa ukusuka kwi-0% ukuya kwi-100% ngokokukhanya kwakho
iimfuno.
Ulawulo lwamandla
1. Umqhubi unamandla e-PF> 0.97/115VAC,
PF>0.96/230VAC, PF>0.94/277VAC kumthwalo opheleleyo.
2. I-Harmonic distortion iyonke igcinwa ngaphantsi kwe-20% ngaphantsi
imiqathango yomthwalo echaziweyo.
ImiGaqo yoKhuseleko
1. Ungagqithi elona nani likhulu le-PSU elivumelekileyo kwisekethe
ibreaker ukuthintela ukugcwala.
2. Landela iindlela ezifanelekileyo zokumisa kunye nokufaka iintambo ngexesha
ukufakela ukuphepha iingozi ukothuka kombane.
Imibuzo Ebuzwa Rhoqo (FAQ)
Umbuzo: Ngaba uluhlu lwe-dimming lungalungiswa kwi-PWM-120-KN LED
umqhubi?
A: Ewe, uluhlu lwe-dimming lungalungiswa ukusuka kwi-0% ukuya kwi-100% usebenzisa
isoftware ehambelanayo.
Umbuzo: Yintoni umsebenzi oqhelekileyo we-PWM-120-KN
umqhubi?
A: Ukusebenza okuqhelekileyo yi-88.5% yemodeli ye-12V kunye ne-90% ye
imodeli ye-24V.
Q: Zingaphi iiyunithi zabaqhubi be-PWM-120-KN ezinokudityaniswa a
umephuli wojikelezo?
A: Unokudibanisa ukuya kwiiyunithi ezi-4 kunye ne-circuit breaker yohlobo
B okanye ukuya kwiiyunithi ezi-6 kunye ne-circuit breaker yohlobo C kwi-230VAC.
"`
PWM-120-KN 120W Constant Voltage PWM Imveliso KNX LED Driver
uthotho
Incwadi yoMsebenzisi
05
.%
File Igama: PWM-120-KN-SPEC 2024-03-12
120W PWM Imveliso KNX LED Driver
PWM-120-KN series
INGCACISO
UMZEKELO
PWM-120-12
PWM-120-24
I-DC VOLTAGE
12V
24V
IRETHWE NGOKU
10A
5A
RATED AMANDLA
120W
120W
ULAWULO LOKUPHIMA
0 ~ 100%
IPHUMO
I-PWM FREQUENCY (Uhlobo.) 200~4000Hz umsebenzisi otshintshekayo nge-ETS
UKUSETYENZISWA, UKUNYUKA IXESHA Qaphela.2 500ms, 80ms/ 230VAC okanye 115VAC
IXESHA LOKUMUSA (Uhlobo.) 16ms/230VAC okanye 115VAC
UMQULUTAGINQAKU ELILANDELAYO. 3
90 ~ 305VAC 127 ~ 431VDC (Nceda ubhekisele kwicandelo elithi “STATIC CHARACTERISTIC”)
UHLELO LOKUQHELEKA 47 ~ 63Hz
UMBONO WAMANDLA (Uhlobo.)
PF>0.97/115VAC, PF>0.96/230VAC, PF>0.94/277VAC @ kumthwalo ogcweleyo (Nceda ubhekisele kwicandelo elithi “MANDLA FACTOR (PF) CHARACTERISTIC”)
IYONKE UKUPHATHWA KWE-HARMONIC
THD< 20%(@load60%/115VAC, 230VAC; @load75%/277VAC) (Nceda ubhekisele kwicandelo elithi "TOTAL HARMONIC DISTORTION")
Igalelo
UKUSEBENZA (Uhlobo.)
88.5%
90%
AC CURRENT (Uhlobo.)
1.3A / 115VAC 0.65A / 230VAC 0.55A / 277VAC
I-INRUSH CURRENT (Uhlobo.) COLD START 60A(twidth=520s ilinganiswe kwi-50% Ipeak) kwi-230VAC; Ngokwe-NEMA 410
MAX. HAYI. yee-PSUs kwi-16A CIRCUIT BREAKER
Iiyunithi ezi-4 (i-circuit breaker yohlobo B) / iiyunithi ezi-6 (i-circuit breaker yohlobo C) kwi-230VAC
UKUVUZA NGOKU
<0.25mA / 277VAC
UKUSETYENZISWA KWAMANDLA OKUMILEYO <0.5W
UKUNXULISWA
I-108 ~ 130% ilinganiswe amandla aphumayo Imowudi ye-Hiccup, ifumana kwakhona ngokuzenzekelayo emva kokuba imeko yesiphoso isusiwe
INTAMBO EMFUTSHANE
Cima o/p voltage, amandla ombane kwakhona ukuze ubuye
UKHUSELEKO KWI-VOLTAGE
15 ~ 17V Vala i-o/p voltage, amandla ombane kwakhona ukuze ubuye
28 ~ 34V
OKOKUPHEPHA KWEBULUNGU Cima o/p voltage, amandla ombane kwakhona ukuze ubuye
ITEMPU YOKUSEBENZA.
Tcase=-40 ~ +90 (Nceda ubhekisele kwicandelo elithi ” OUTPUT LOAD vs TEMPERATURE”)
MAX. CASE TEMP.
Tcase=+90
UKUSEBENZA UKUTHUKA
I-20 ~ 95% ye-RH engavumiyo
INDLELA YOKUGCINA IMEKO, UKUFUMUKA -40 ~ +80, 10 ~ 95% RH
IXESHA. UKUQINISEKISA
±0.03%/ (0 ~ 45,ngaphandle kwe-0 ~ 40 ye-12V)
UKUDIDLA
10 ~ 500Hz, 5G 12min./1cycle, ixesha le-72min. nganye ecaleni X, Y, Z izizembe
IMIGANGATHO YOKHUSELEKO
Qaphela.5
I-ENEC BS EN/EN61347-1, BS EN/EN61347-2-13, BS EN/EN62384 ezimeleyo, GB19510.14,GB19510.1, EAC TP TC 004 evunyiweyo
IMIGANGATHO ye-KNX
Iprothokholi eqinisekisiweyo
YIMA IVOLITAGE
UKHUSELEKO &
I-EMC
UKUCHASWA KWAMAKHELA
Inqaku lokukhutshwa kwe-EMC.6
UKUGONYWA KWI-EMC
MTBF
I/PO/P:3.75KVAC
I/PO/P:100M Ohms / 500VDC / 25/ 70% RH
Ukuthotyelwa kwe-BS EN/EN55015, BS EN/EN61000-3-2 Udidi C (@load60%) ; BS EN/EN61000-3-3, GB/T 17743, GB17625.1;EAC TP TC 020
Ukuthotyelwa kwe-BS EN/EN61000-4-2,3,4,5,6,8,11; I-BS EN/EN61547, inqanaba loshishino olukhanyayo (i-surge immunity Line-Line 2KV), i-EAC TP TC 020 1915.2K hrs min. I-Telcordia SR-332 (Bellcore); 205.8K iiyure min. I-MIL-HDBK-217F (25)
ABANYE DIMENSION
191*63*37.5mm (L*W*H)
PHAWULA
UKUPAKISHA
0.80Kg; 15pcs / 13.0Kg / 0.87CUFT
1. Zonke iiparamitha ENGAkhankanywanga ngokukodwa zilinganiswe kwi-230VAC igalelo, ireyithingi yangoku kunye ne-25 yobushushu be-ambient. 2. Ukunciphisa ukulinganisa kunokufuneka phantsi kwe-low input voltages. Nceda ujonge amacandelo "STATIC CHARACTERISTIC" ngeenkcukacha. 3. Ubude bexesha lokuseta bulinganiswa ekuqaleni okubandayo. Ukuvula/UKUVALA umqhubi kunokukhokelela ekwandeni kwexesha lokuseta. 4. Umqhubi uthathwa njengecandelo eliya kusetyenziswa ngokudibeneyo nezixhobo zokugqibela. Ekubeni ukusebenza kwe-EMC kuya kuchaphazeleka
ngofakelo olupheleleyo, abavelisi bezixhobo zokugqibela kufuneka baphinde bafanelekele i-EMC Directive kufakelo olupheleleyo kwakhona. (njengoko ifumaneka kwi-https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf) 5. Olu chungechunge luhlangabezana nexesha eliqhelekileyo lokuphila le> 50,000 iiyure zokusebenza xa i-Tcase, ngokukodwa i-tc point (okanye i-TMP, nge-DLC nganye ), imalunga nama-75 okanye ngaphantsi. 6. Nceda ujonge ingxelo yewaranti kwi MEAN WELL's webindawo ku-http://www.meanwell.com 7. Ubushushu obuphakathi kwe-3.5/1000m kunye neemodeli ezingenafeni kunye ne-5/1000m ezinemodeli yeefeni zobude bokusebenza obungaphezulu kwe-2000m(6500ft). 8. Ngalo naliphi na inqaku lesicelo kunye ne-IP isilumkiso sokufakela ubungqina bamanzi, nceda ubhekiselele kwincwadana yethu yomsebenzisi ngaphambi kokuba usebenzise. https://www.meanwell.com/Upload/PDF/LED_EN.pdf
Ulwazi oluneenkcukacha, nceda ujonge ku-https: //www.meanwell.com/serviceDisclaimer.aspx
File Igama: PWM-120-KN-SPEC 2024-03-12
120W PWM Imveliso KNX LED Driver
UKUSEBENZA KWAKUNCINCI
AC/L(Brown) AC/N(Blue)
I-PWM-120-KN
PWM-120-KN series
KNX+(Bomvu) KNX-(Mnyama) +V(Bomvu) -V(Mnyama)
Umgaqo wokuncipha wemveliso yesimbo se-PWM Ukuncipha kuphunyezwa ngokutshintsha-tshintsha umjikelo womsebenzi wemveliso yangoku.
Imveliso DC yangoku ON
Io=0A
YIMA ITON
T
Umjikelo woMsebenzi we-TON(%) =
×100%
T
Imveliso yePWM rhoqo ukuya kuthi ga kwi-4KHz
KNXInterface Faka isignali ye-KNX phakathi kwe-KNX+ ne-KNX-. Inkqubo yesicelo (idathabheyisi) inokukhutshelwa kwiikhathalogu ze-Intanethi ukusuka kwi-ETS okanye nge-http://www.meanwell.com/productCatalog.aspx
File Igama: PWM-120-KN-SPEC 2024-03-12
Umthwalo (%)
120W PWM Imveliso KNX LED Driver
I-OUTPUT LOAD vs TEMPERATURE
PWM-120-KN series
100
80 230VAC Ungeniso kuphela
60 50 40
20
12V kuphela
-40 -25
0
15
30
40 45 50
60
ITEMPERATURE OMBI,Ta ()
I-70 (HORIZONTAL)
Umthwalo (%)
100
80 230VAC Ungeniso kuphela
60
40
20
-40 -25 0
20
45
65
75
85
I-90 (HORIZONTAL)
Tcase ()
IMPAWU ENGQONDO
100 90 80 70 60 50 40
90 100 125 135 145 155 165 175 180 200 230 305
Igalelo VOLTAGE (V) 60Hz De-rating iyafuneka phantsi kwe-low input voltage.
IYONKE I-HARMONIC DISTORTION (THD)
Imodeli ye-24V, iTcase kwi-80
25
20
15
10
5
0
50%
60%
70%
80%
90%
100%
layisha
115VAC 230VAC 277VAC
UKUSEBENZA(%)
PF
UMBONO WAMANDLA (PF) UMNTU
Tcase ngo 80
1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1
0 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
layisha
115V 230V 277V
UKUSEBENZA vs UMSEBENZI
Uthotho lwe-PWM-120-KN lunokusebenza okuncomekayo okuya kuthi ga kwi-90% kunokufikelelwa kwizicelo zasendle. Imodeli ye-24V, iTcase kwi-80
100 90 80 70 60 50 40 30 20 10
0 10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
layisha
115V 230V 277V
I-THD LOAD (%)
File Igama: PWM-120-KN-SPEC 2024-03-12
120W PWM Imveliso KNX LED Driver
PWM-120-KN series
UBOMI BONKE
UBOMI(Kh)
120
100
80
60
40
20
0
20
30
40
50
60
70
80
90
Tcase ()
File Igama: PWM-120-KN-SPEC 2024-03-12
120W PWM Imveliso KNX LED Driver
PWM-120-KN series
Umzobo weBhloko
Isihluzi se-EMI
Mna / P
&
IZIQINISEKISO
PFC ISEKELA
UKUTSHINTSHA AMANDLA
I-OTP
I-OLP
PWM & PFC ULAWULO
IZIBHENO &
ISIHLUNGI
PFC fosc : 50~120KHz PWM fosc : 60~130KHz
I-OLP
ISAKHITHI EYENZAYO
UKUFUMANA ISEKELA
+V -V KNX+ KNX-
I-OVP
Qaphela: Ifoskhi ye-PWM apha ayinxulumananga ne-outut PWM dimming
Ukucaciswa koomatshini
300±20
AC/L(Brown) AC/N(Blue)
50±3 SJTW 18AWG×2C
5
Iqhosha le-191 leprogram ye-KNX kunye ne-LED
5
63 31.5
2-4.5
T case tc
95.5
5
tc: max. Ubushushu betyala
5
Inombolo yetyala le-PWM-120-KN
Iyunithi:mm
350±10
UL2464 20AWG×2C
SJOW 17AWG×2C 50±3 300±10
KNX+(Bomvu) KNX-(Mnyama) +V(Bomvu) -V(Mnyama)
Isidibanisi se-KNX sibandakanyiwe kwibhokisi
37.5
3
Oomatshini view ngesicelo
AC/L(Brown) AC/N(Blue)
KNX+(Bomvu) KNX-(Mnyama) +V(Bomvu) -V(Mnyama)
File Igama: PWM-120-KN-SPEC 2024-03-12
120W PWM Imveliso KNX LED Driver
Cebisa umkhomba-ndlela wokunyuka
UFakelo lweNcwadana yoQhagamshelwano lohlobo lwe-KNX
PWM-120-KN series
AC/L(BROWN) AC/N(BLUWE)
Vo+(RED)
+
–
Vo-(EMNYAMA)
KNX+(RED)
Umtya we-LED okanye umthamo oqhubekayotage Ibhalbhu ye-LED
KNX-(EMNYAMA) PWM KN uthotho inokuba ETS adressing/programing NGAPHANDLE kokuqhagamshela AC mains
Ibhasi ye-KNX
Izilumkiso Phambi kokuba uqalise naluphi na ufakelo okanye umsebenzi wokulungisa, nceda uqhawule unikezelo lombane kusetyenziso. Qinisekisa ukuba ayinakuphinda idityaniswe ngempazamo! Gcina umoya ococekileyo ojikeleze iyunithi kwaye ungapakishi nayiphi na into kuyo. Kwakhona i-10-15 cm imvume kufuneka igcinwe xa isixhobo esisecaleni singumthombo wokushisa. Ukunyuselwa uqhelaniso ngaphandle kokuqhelaniswa nomgangatho okanye ukusebenza phantsi kobushushu obuphezulu be-ambient kunokunyusa ubushushu becandelo langaphakathi kwaye kuya kufuna ukucuthwa komgangatho kwimveliso yangoku. Ireyithingi yangoku yentambo evunyiweyo yokuqala / yesibini kufuneka ibe nkulu okanye ilingane naleyo yeyunithi. Nceda ubhekisele kwiinkcukacha zayo. Tc max. ichongiwe kwileyibhile yemveliso. Nceda uqinisekise ukuba iqondo lobushushu leqondo le-Tc aliyi kudlula umda. SUKU qhagamshela “KNX- kuVo-“. Ukunikezelwa kombane kuthathwa njengecandelo eliya kusetyenziswa ngokudibeneyo nezixhobo zokugqibela. Ekubeni ukusebenza kwe-EMC kuya kuchaphazeleka kufakelo olupheleleyo, abavelisi bezixhobo zokugqibela kufuneka baphinde bafanelekele i-EMC Directive kufakelo olupheleleyo kwakhona.
File Igama: PWM-120-KN-SPEC 2024-03-12
Amaxwebhu / Izibonelelo
 |
UKUTHETHA KANKULU PWM-120-12 Constant Voltage PWM Imveliso KNX LED Driver [pdf] Incwadi yoMnini PWM-120-12, PWM-120-24, PWM-120-12 Constant Vol.tage PWM Isiphumo KNX LED Umqhubi, PWM-120-12, iVol rhoqotage PWM Isiphumo KNX Umqhubi we-LED, i-PWM Imveliso ye-KNX Umqhubi we-LED, uMqhubi we-LED |