LS-ELECTRIC GPL-D22C Programmable Logic Controller
ISIKHOKELO SOKUFAKA
UMZEKELO: GPL-D22C,D24C,DT4C/C1 GPL-TR2C/C1,TR4C/C1,RY2C
Esi sikhokelo sofakelo sibonelela ngolwazi olulula lomsebenzi okanye ulawulo lwePLC. Nceda ufunde ngononophelo olu xwebhu lwedatha kunye neencwadana ngaphambi kokusebenzisa iimveliso. Ngokukodwa funda izilumkiso emva koko uphathe iimveliso ngokufanelekileyo
1. ImiGaqo yoKhuseleko
Intsingiselo yeleyibhile yesilumkiso kunye nesilumkiso
ISILUMKISO
ISILUMKISO ibonisa imeko enokuba yingozi, ukuba ayithintelwa, inokubangela ukufa okanye ukwenzakala okungathethekiyo
ISILUMKO ibonisa imeko enokuba yingozi enokuthi, ukuba ayiphetshwa, ingabangela ukwenzakala okungephi okanye okuphakathi.
Isenokusetyenziswa ukulumkisa ngokuchasene nezenzo ezingakhuselekanga
ISILUMKISO
① Musa ukuqhagamshelana neetheminali ngelixa umbane usetyenziswa.
② Qinisekisa ukuba akukho micimbi yesinyithi yangaphandle.
③ Musa ukuyilawula ibhetri(itshaji, iqhaqhe, iyabetha, imfutshane, iyanyibilikisa).
ISILUMKO
① Qiniseka ukuba ujonga ivolthi ekalisiweyotage kunye nolungiselelo lwetheminali phambi kocingo
② Xa ufaka iintambo, qinisa isikrufu sebhloko yeterminal ngoluhlu lwetorque echaziweyo
③ Musa ukufaka izinto ezinokutsha kwindawo ezingqongileyo
④ Musa ukusebenzisa i-PLC kwindawo yokungcangcazela ngokuthe ngqo
⑤ Ngaphandle kwabasebenzi benkonzo yeengcali, musa ukuqhawula okanye ukulungisa okanye ukuguqula imveliso
⑥ Sebenzisa i-PLC kwindawo ehambelana neenkcukacha ngokubanzi eziqulethwe kule datha.
⑦ Qinisekisa ukuba umthwalo wangaphandle awudluli umlinganiselo wemodyuli yemveliso.
⑧ Xa ulahla i-PLC kunye nebhetri, yiphathe njengenkunkuma yamashishini.
⑨ Umqondiso we-I/O okanye umgca wonxibelelwano uya kubanjiswa ubuncinci be-100mm kude ne-highvoltagIntambo ye-e okanye intambo yombane.
2. Imeko-bume yokuSebenza
Ukufakela, jonga le miqathango ingezantsi.
3. Izixhobo kunye neNgcaciso yeCable
■ Jonga iProfibus Connector ekwibhokisi
1) Ukusetyenziswa : I-Profibus Communication Connector
2) Into : GPL-CON
■ Xa usebenzisa unxibelelwano lwePnet, intambo yeperi ejikiweyo ekhuselekileyo iya kusetyenziswa kuqwalaselwe umgama kunye nesantya sonxibelelwano.
1) Umenzi : I-Belden okanye umenzi wezinto ezilinganayo ngezantsi
2) Ukucaciswa kweCable
4. Ubungakanani (mm)
■ Le yinxalenye engaphambili yemveliso. Jonga igama ngalinye xa usebenzisa inkqubo. Ngolwazi oluthe vetshe, jonga kwincwadi yomsebenzisi.
■ Iinkcukacha ze-LED
| Igama | Inkcazo |
| Pwr | Ibonisa ubume bamandla |
| I-RDY | Ibonisa ubume bojongano lwemodyuli yonxibelelwano |
| ERR | Ibonisa ubume bothungelwano lwemodyuli yonxibelelwano |
5. IiNgcaciso zoMsebenzi
■ Le yimigaqo yokusebenza kwemveliso. Bhekisela kwigama ngalinye xa uqhuba inkqubo. Ngolwazi oluthe vetshe, jonga kwincwadi yomsebenzisi.
6. UYilo lweBhloko yeTheminali ye-I/O Wiring
■ Olu luyilo lwebhloko yeterminal ye-I/O yocingo. Bhekisela kwigama ngalinye xa uqhuba inkqubo.
Ngolwazi oluthe vetshe, jonga kwincwadi yomsebenzisi.
7. Iingcingo
■ Ulwakhiwo lwesinxibelelanisi kunye nendlela yokufaka iintambo
1) Umgca wokufaka: umgca oluhlaza uqhagamshelwe kwi-A1, umgca obomvu uxhunywe kwi-B1
2) Umgca wokuphuma: umgca oluhlaza uqhagamshelwe kwi-A2, umgca obomvu uqhagamshelwe kwi-B2
3) Connect ikhaka ukuba clamp yekhaka
4) Kwimeko yokufaka ikhonkco kwi-terminal, faka ikhebula kwi-A1, B1
8. Iwaranti
■ Ixesha lewaranti ziinyanga ezingama-36 ukusuka kumhla wokwenziwa kwayo.
■ Ukuxilongwa kokuqala kweempazamo kufuneka kuqhutywe ngumsebenzisi. Nangona kunjalo, ngesicelo, i-LS ELECTRIC okanye abameli bayo banokuwenza lo msebenzi ngentlawulo. Ukuba unobangela wempazamo
kufunyaniswe ukuba luxanduva lwe-LS ELECTRIC, le nkonzo iya kuba simahla.
■ Ukungabandakanywa kwiwaranti
1) Ukutshintshwa kwezinto ezisetyenziswayo nezinomlinganiselo wobomi (umz. iireyiyi, iifuse, iicapacitor, iibhetri, iiLCDs, njl.njl.)
2) Ukungaphumeleli okanye umonakalo obangelwa iimeko ezingafanelekanga okanye ukuphatha ngaphandle kwezo zichazwe kwincwadi yomsebenzisi
3) Ukungaphumeleli okubangelwa yimiba yangaphandle engahambelani nemveliso
4) Ukungaphumeleli okubangelwa ukuguqulwa ngaphandle kwemvume ye-LS ELECTRIC
5) Ukusetyenziswa kwemveliso ngeendlela ebezingalindelekanga
I-6) Ukungaphumeleli okungenakuqikelelwa / ukusonjululwa ngobuchwephesha besayensi yangoku ngexesha lokwenziwa
7) Ukusilela ngenxa yezinto zangaphandle ezifana nomlilo, umthamo ongaqhelekangatage, okanye iintlekele zendalo
8) Ezinye iimeko apho i-LS ELECTRIC ayinaxanduva
■ Ngolwazi oluneenkcukacha lwewaranti, nceda ujonge kwincwadana yemigaqo yomsebenzisi.
■ Umxholo wesikhokelo sokufakela unokutshintsha ngaphandle kwesaziso sokuphucula ukusebenza kwemveliso.
I-LS ELECTRIC Co., Ltd.
0310000310 V4.5 (2024.6)
• I-imeyile: automation@ls-electric.com
• Ikomkhulu/iOfisi yaseSeoul Umnxeba: 82-2-2034-4033,4888,4703
• LS ELECTRIC Shanghai Office (China) Umnxeba: 86-21-5237-9977
• I-LS ELECTRIC (Wuxi) Co., Ltd. (Wuxi, China) Umnxeba: 86-510-6851-6666
• I-LS-ELECTRIC Vietnam Co., Ltd. (Hanoi, Vietnam) Umnxeba: 84-93-631-4099
• LS ELECTRIC Middle East FZE (Dubai, UAE) Umnxeba: 971-4-886-5360
• I-LS ELECTRIC Europe BV (Hoofddorf, Netherlands) Umnxeba: 31-20-654-1424
• I-LS ELECTRIC Japan Co., Ltd. (Tokyo, Japan) Umnxeba: 81-3-6268-8241
• LS ELECTRIC America Inc. (Chicago, USA) Umnxeba: 1-800-891-2941
• Umzi-mveliso: 56, Samseong 4-gil, Mokcheon-eup, Dongnam-gu, Cheonan-si, Chungcheongnamdo, 31226, Korea
Iinkcukacha
- C/N: 10310000310
- Imveliso: UMlawuli weNgcaciso eCwangcisiweyo - I-Smart I / O Pnet
- Iimodeli: GPL-D22C, D24C, DT4C/C1, GPL-TR2C/C1, TR4C/C1,
I-RY2C
FAQ
Umbuzo: Abonisa ntoni amaxabiso amanani kwisicatshulwa-sicatshulwa?
A: Amanani amanani anokumela iiparamitha okanye ufundo oluthile kumsebenzi wePLC, onje ngeqondo lobushushu, ukufuma, okanye amanqanaba omqondiso.
Amaxwebhu / Izibonelelo
 |
LS-ELECTRIC GPL-D22C Programmable Logic Controller [pdf] Isikhokelo soFakelo GPL-D22C, D24C, DT4C-C1, GPL-TR2C-C1, TR4C-C1, RY2C, GPL-D22C Programmable Logic Controller, GPL-D22C, Programmable Logic Controller, Logic Controller |
