IINKQUBO ZE-LD LD DAVE G3 Series Active 2.1 DSP Based PA System

Wenze ukhetho olufanelekileyo!

Senze le mveliso ukuba isebenze ngokuthembekileyo kwiminyaka emininzi. I-LD Systems imele oku kunye negama layo kunye neminyaka emininzi yamava njengomvelisi weemveliso zeaudio ezikumgangatho ophezulu. Nceda ufunde le Ncwadi yoMsebenzisi ngononophelo, ukuze uqalise ukusebenzisa ngeyona ndlela iphezulu imveliso ye-LD Systems ngokukhawuleza.
Ungafumana ulwazi oluthe kratya malunga ne-LD-SYSTEMS kwindawo yethu ye-Intanethi WWW.LD-SYSTEMS.COM

IMIQATHANGO YOKUTHINTELA

1. Nceda ufunde le miyalelo ngononophelo.
2. Gcina zonke iinkcukacha kunye nemiyalelo kwindawo ekhuselekileyo.
3. Landela imiyalelo.
4. Qaphela zonke izilumkiso zokhuseleko. Ungaze ususe izilumkiso zokhuseleko okanye olunye ulwazi kwisixhobo.
5. Sebenzisa izixhobo kuphela ngendlela ecetywayo kunye nenjongo ecetywayo.
6. Sebenzisa kuphela izitendi ezizinzile ngokwaneleyo nezihambelanayo kunye/okanye izinto zokukhwela (ufakelo olusisigxina). Qinisekisa ukuba izinto zokuxhoma eludongeni zifakwe ngokufanelekileyo kwaye zikhuselekile.
   Qinisekisa ukuba isixhobo sifakwe ngokukhuselekileyo kwaye asinakuwa phantsi.
7. Ngexesha lofakelo, qwalasela imigaqo yokhuseleko esebenzayo yelizwe lakho.
8. Ungaze ufake kwaye usebenzise izixhobo ezikufutshane neeradiyetha, iirejista zobushushu, ii-oveni okanye ezinye iindawo zobushushu. Qinisekisa ukuba isixhobo sihlala sifakwe ukuze sipholiswe ngokwaneleyo kwaye singenako ukufudumala.
9. Ungaze ubeke imithombo yokuvutha, umzekelo, amakhandlela avuthayo, kwisixhobo.
10. Imibhobho yokungenisa umoya mayingavalwa.
11. Musa ukusebenzisa esi sixhobo kwindawo ekufutshane yamanzi (ayisebenzisi kwizixhobo ezikhethekileyo zangaphandle - kule meko, gcina imiyalelo ekhethekileyo echazwe ngezantsi. Musa ukubeka esi sixhobo kwizinto ezinokutsha, ulwelo okanye iigesi. Kuphephe ukukhanya kwelanga ngqo!
12. Qinisekisa ukuba amanzi athontsizayo okanye atshiziweyo akanakungena kwisixhobo. Musa ukubeka izitya ezizaliswe lulwelo, njengevazi okanye izitya zokusela, kwisixhobo.
13. Qinisekisa ukuba izinto azinakuwela kwisixhobo.
14. Sebenzisa esi sixhobo kuphela kunye nezixhobo ezicetyiswayo kwaye zijoliswe ngumenzi.
15. Sukuvula okanye ulungise esi sixhobo.
16. Emva kokudibanisa izixhobo, khangela zonke iintambo ukuze uthintele umonakalo okanye iingozi, umzekelo, ngenxa yeengozi zokukhubeka.
17. Ngexesha lothutho, qinisekisa ukuba isixhobo asikwazi ukuwa kwaye sinokubangela umonakalo wepropathi kunye nokwenzakala komntu.
18. Ukuba isixhobo sakho asisasebenzi kakuhle, ukuba ulwelo okanye izinto zingene ngaphakathi kweso sixhobo okanye ukuba sonakaliswe ngendlela engenye, sicime ngoko nangoko kwaye usikhuphe kumbhobho oyintloko (ukuba sisixhobo esiqhutywa ngamandla). Esi sixhobo sinokulungiswa kuphela ngabasebenzi abagunyazisiweyo, nabaqeqeshiweyo.
19. Coca izixhobo usebenzisa ilaphu elomileyo.
20. Thobela yonke imithetho yokulahla esebenzayo kwilizwe lakho. Ngexesha lokulahla ukupakishwa, nceda uhlukanise iplastiki kunye nephepha / ikhadibhodi.
21. Izingxobo zeplastiki kufuneka zigcinwe kwindawo engafikelelekiyo ebantwaneni.
22. Isixhobo asiyi kuboniswa ngokuvuza okanye ukutshiza kwaye kungabikho zinto zizaliswe lulwelo, njengevazi, ziya kubekwa kwisixhobo.
23. Iplagi engundoqo isetyenziswa njengesixhobo sokuqhawula, isixhobo sokuqhawula siya kuhlala sisebenza ngokulula. NGESIXHOBO ESIQHAGAMSHELANA NAMANDLA AMANDLA
24. ISILUMKISO: Ukuba intambo yamandla yesixhobo ixhotyiswe ngoqhagamshelwano lomhlaba, ngoko kufuneka idibaniswe kwindawo yokuphuma kunye nomhlaba okhuselayo.
    Ungaze uwuvale umhlaba okhuselayo wentambo yamandla.
25. Ukuba isixhobo sibonakaliswe kukuguquguquka okukhulu kobushushu (umzekeloample, emva kothutho), musa ukuyivula ngoko nangoko. Ukufuma kunye nokujiya kungonakalisa isixhobo. Musa ukuguqula isixhobo de sifikelele kwiqondo lobushushu begumbi.
26. Phambi kokudibanisa isixhobo kwindawo yokuphuma umbane, qinisekisa kuqala ukuba ii-mains voltage kunye nefrikhwensi ihambelana namaxabiso achazwe kwisixhobo. Ukuba isixhobo sinomthamotage yokukhetha switsha, qhagamshela isixhobo kwindawo yokuphuma umbane kuphela ukuba amaxabiso ezixhobo kunye namaxabiso ombane ongundoqo ahambelana. Ukuba intambo yamandla efakiweyo okanye iadaptha yamandla ayingeni kwindawo ephuma eludongeni, qhagamshelana nosombane wakho.
27. Musa ukunyathela kwintambo yombane. Qinisekisa ukuba intambo yamandla ayinakuba kinked, ingakumbi kwi-outlet ye-mains kunye / okanye i-adapter yamandla kunye nesixhobo sokudibanisa.
28. Xa udibanisa izixhobo, qiniseka ukuba intambo yamandla okanye i-adapter yamandla ihlala ifumaneka ngokukhululekile. Soloko uqhawula isixhobo kunikezelo lombane ukuba isixhobo asisebenzi okanye ukuba ufuna ukucoca isixhobo. Soloko ukhulula intambo yombane kunye neadaptha yamandla kwisixhobo sombane kwiplagi okanye iadaptha hayi ngokutsala intambo. Ungaze ubambe intambo yamandla kunye neadaptha yamandla ngezandla ezimanzi.
29. Nanini na xa kunokwenzeka, kuphephe ukucinywa nokucima isixhobo ngokulandelelanayo kuba kungenjalo oku kunokunciphisa ubomi obuluncedo besixhobo.
30. ULWAZI OLUBALULEKILEYO: Faka iifusi endaweni yazo kuphela ngohlobo olufanayo kunye nokulinganisa. Ukuba ifyuzi ivuthela ngokuphindaphindiweyo, nceda uqhagamshelane neziko lenkonzo eligunyazisiweyo.
31. Ukuqhawula ngokupheleleyo izixhobo ezisuka kumbhobho wamandla, khupha intambo yombane okanye iadaptha yamandla kwindawo yombane.
32. Ukuba isixhobo sakho sinesixhobo sokudibanisa amandla eVolex, isiqhagamshelanisi sesixhobo sokukhwelana seVolex kufuneka sivulwe phambi kokuba sisuswe.
    Nangona kunjalo, oku kuthetha ukuba isixhobo sinokutyibilika kwaye siwe phantsi ukuba intambo yamandla itsaliwe, nto leyo enokukhokelela kumonzakalo kunye/okanye omnye umonakalo. Ngenxa yesi sizathu, hlala uqaphele xa ubeka iintambo.
33. Khupha intambo yamandla kunye neadaptha yamandla kwindawo yokuphuma umbane ukuba kukho umngcipheko wokubetha kombane okanye phambi kwexesha elongeziweyo lokungasetyenziswa.

ISILUMKO: Ungaze ususe isigqubuthelo, kuba kungenjalo kunokubakho umngcipheko wokothuka kombane. Akukho malungu anokusetyenziswa ngumsebenzisi ngaphakathi. Ulungiso lwenziwa kuphela ngabasebenzi benkonzo abaqeqeshiweyo.

Ukudanyaza kombane kunye nesimboli yentloko yotolo ngaphakathi kunxantathu olinganayo yenzelwe ukwazisa umsebenzisi ngobukho bevolthi eyingozi engafakwanga.tage” ngaphakathi kwendawo ebiyelweyo yemveliso enobukhulu obaneleyo ukwenza umngcipheko wokothuka kombane.

Uphawu lwesikhuzo ngaphakathi kunxantathu olinganayo lwenzelwe ukwazisa umsebenzisi malunga nobukho bemiyalelo ebalulekileyo yokusebenza kunye nokugcinwa.

ISILUMKISO-AMAGQANABA OMVA OMPHEZULU NGEMVELISO YE-AUDIO!
Esi sixhobo senzelwe ukusetyenziswa kobungcali. Ke ngoko, ukusetyenziswa kwesi sixhobo sorhwebo kuxhomekeke kwimithetho nemimiselo yothintelo lwengozi kazwelonke ngokufanelekileyo. Njengomvelisi, i-Adam Hall inyanzelekile ukuba ikwazise ngokusesikweni malunga nobukho beengozi zempilo ezinokubakho.
Umonakalo wokuva ngenxa yomthamo ophezulu kunye nokuvezwa kwexesha elide: Xa isetyenziswa, le mveliso iyakwazi ukuvelisa amanqanaba aphezulu oxinzelelo lwesandi (SPL) onokukhokelela kumonakalo wokuva ongenakuguqulwa kubadlali, abasebenzi kunye namalungu abaphulaphuli.
Ngesi sizathu, kuthintele ukuba sesichengeni ixesha elide kwimithamo engaphezulu kwe-90 dB.

Ukuthintela umonakalo onokwenzeka wokuva, kunqanda ukumamela kumanqanaba aphezulu evolumu ixesha elide.
Nkqu nokuba sesichengeni sogqabhuko-dubulo olufutshane lwengxolo ephezulu kunokubangela ukungeva kakuhle. Nceda ugcine ivolyum rhoqo kwinqanaba elitofotofo.

Isilumkiso! Olu phawu lubonisa indawo eshushu. Iindawo ezithile zendlu zinokutshisa ngexesha lokusebenza. Emva kokusetyenziswa, linda ixesha lokupholisa phantsi lemizuzu eli-10 ubuncinane phambi kokuba uphathe okanye uhambise isixhobo.

Isilumkiso! Esi sixhobo senzelwe ukusetyenziswa ngaphantsi kweemitha ezingama-2000 ukuphakama.

Isilumkiso! Le mveliso ayenzelwanga ukusetyenziswa kwiindawo ezitshisayo.

PHAWULA: Esi sixhobo sivavanyiwe saza safunyanwa sithobela imida yesixhobo sedijithali soDidi B, ngokungqinelana neCandelo le-15 leMithetho yeFCC. Le mida yenzelwe ukubonelela ngokhuseleko olufanelekileyo ekuphazamisekeni okunobungozi kwindawo yokuhlala. Esi sixhobo sivelisa, sisebenzise kwaye sinokusasaza amandla amaza erediyo kwaye, ukuba asifakanga kwaye sisetyenziswa ngokuhambelana nemiyalelo, sinokubangela uphazamiseko oluyingozi kunxibelelwano lwerediyo. Nangona kunjalo, akukho siqinisekiso sokuba ukuphazamiseka akuyi kwenzeka kufakelo oluthile. Ukuba esi sixhobo sibangela uphazamiseko oluyingozi kunomathotholo okanye ulwamkelo lukamabonakude, olunokumiselwa ngokucinywa nokulayita isixhobo, umsebenzisi uyakhuthazwa ukuba azame ukulungisa uphazamiseko ngenye okanye ngaphezulu kwezi ndlela zilandelayo:

• Jongisa kwakhona okanye uhambise i-eriyali efumanayo.
• Yandisa ukwahlukana phakathi kwesixhobo kunye nomamkeli.
• Qhagamshela izixhobo kwindawo yokuphuma kwisekethe eyahlukileyo kuleyo apho umamkeli aqhagamshelwe khona.
• Dibana nomthengisi okanye igcisa likanomathotholo/kumabonakude ukuze ufumane uncedo

INTSHAYELELO

Ii-LD Systems Dave G³ uthotho lwezipikha zesandisi-lizwi ziyilelwe ukusetyenziswa ngobuchule. Banikezela nge-DSP esekelwe kwi-2.1 yeeyunithi zokuqinisa isandi kunye namacandelo aphezulu, anamandla ampukukhanyisa kunye nesandi esilungelelene kakuhle kulo lonke uluhlu lwee-frequencies, zonke ngexabiso elifanelekileyo kakhulu.
Olu chungechunge lubandakanya iinkqubo ezintathu ze-2.1 subwoofer / satellite zobukhulu obuhlukeneyo. I-LDDAVE10G3 ene-10" subwoofer kunye ne-350W amandla enkqubo ye-RMS, i-LDDAVE12G3 ene-12" subwoofer kunye ne-500W RMS amandla enkqubo kunye ne-LDDAVE15G3 kunye ne-15 "subwoofer kunye ne-700W RMS amandla enkqubo.
I-LD LECC DSP yangaphakathi ibonelela ngokwenziwa kwesandi sedijithali esifana ne-crossover, ukulinganisa, icompressor kunye nokusebenza komda olungelelaniswe ngokugqibeleleyo kuzo zonke iimodeli ze-LD DAVE G³ ukugcina eyona nkqubo ilungileyo yeaudio.

UKUFAKWA & UKUSEBENZA

UKUFAKWA

Nceda ubeke ii-subwoofers kunye nezitendi zesathelayithi kwindawo ezinzileyo nasemhlabeni. Musa ukubeka ii-subwoofers kunye nezithethi zesathelayithi kwiinqwelo zokuhamba, izitulo, iitafile okanye into efanayo ukuze uthintele iingozi. Sicebisa Adam Hall stand speaker SPS56 okanye i speaker pole SPS822 (M20 thread, inyuswe kwi subwoofer) kunye nefolokhwe yokunyusela kwizitendi zesithethi SPS823 zisetyenziswe neLD DAVE G³ isathelayithi. Iisathelayithi zeLDDAVE10G³ zixhotyiswe ngeflange yokumisa isithethi esingu-5° ukuthambeka kwesandi esingcono sosasazo.
Iisathelayithi ze-LDDAVE12G³ kunye ne-LDDAVE15G³ zixhotyiswe ngelungelo elilodwa lomenzi we-SM707 yesithethi seflange esine-slope eguquguqukayo. Ukulungelelanisa i-engile ye-slope phakamisa isithethi sesathelayithi kancinane kwaye ngononophelo ukusuka kwi-latching mechanism (malunga ne-1/2 cm), jikela kwi-engile oyifunayo kwaye unciphise ikhabhinethi.

UKUSEBENZA / BETRIEB

Ukuze kuthintelwe ingxolo yokuqalisa engathandekiyo ebangelwa zizixhobo eziqhagamshelweyo ezifana nezixube njl. Ngaphambi kokutshintsha amandla, ulawulo oluphambili lwenqanaba kufuneka lubekwe kuncinci.

IZINTO EZIKHETHEKILEYO

• IBHODI YE-CASTOR + UKHUSELEKO LOKHUSELEKO lwe-SUBWOOFERS NE-SATELLITES
  Idatha ye-LDDAVE10G3SET
  Idatha ye-LDDAVE12G3SET
  Idatha ye-LDDAVE15G3SET
  
• IBHODI YE-CASTOR
  38110G3
  38112G3
  38115G3
  
• IZIKHUSELEKO KWI-SATELLITES
  I-LDD10G3SATBAG
  I-LDD12G3SATBAG
  I-LDD15G3SATBAG
  
• UKHUSELEKO UKHUSELEKO FOR SUBWOOFER
  I-LDD10G3SUBBAG
  I-LDD12G3SUBBAG
  I-LDD15G3SUBBAG
  
• 2 X ISISOMBE SEMI NEBHAGA YEZOTHUTHO
  I-SPS023SET
  
• 2 X ISISOMBE SEMI NEBHAGA YEZOTHUTHO + 2 X IIKHAWULA ZISISOKHELO
  (2 X 1,5MM² I-SPEAKON IYAQHUBEKA/ I-SPEAKON
  IYAQHUBEKA, 5M)
  I-SPS023SET2
  

IPHANELI YANGEmva LDDAVE10G³

IMIBA YOLAWULO

INQANABA ELIPHAMBILI

Ulawulo lwevolyum engundoqo ye-2.1 yesixokelelwano sesandisi-lizwi. Umthamo we-subwoofer kunye neesathelayithi ezichaphazelekayo ngendlela efanayo.

ISIGABA ESINYE

Iguqula inqanaba le-subwoofer (0°, 180°)

INQANABA ENGANSI

Ukulawulwa komthamo we-subwoofer. Lungisa umthamo we-subwoofer ngokumalunga neesathelayithi. Indawo ecetyiswayo yeziko lokumisela (12:00h).

Igalelo lomgca (EKHOHLWE/EKUDENI)

Igalelo lomgca we-RCA ongalinganiyo

Igalelo lomgca (EKHOhlo/Ekunene

I-Balanced XLR/6.3 mm jack (combo) igalelo lomgca

HLALA AMANDLA APHUMILE (EKHOHLWE/EKUDENI

Imveliso ehambelanayo ye-Speakon yoluhlu lwe-LD DAVE G³

AMANDLA

Amandla ON/OFF switsha. Phambi kokuba uvule umbane, zonke izilawuli zenqanaba kufuneka zisetelwe kubuncinci.

I-SOCKET EPHAMBILI (i-VOLEX POWER PLUG)

Ngomphathi we-fuse eyakhelwe-ngaphakathi uxhulumaniso lwe-AC nge-IEC isinxibelelanisi (220 - 240V AC). Intambo yamandla ene-lockable Volex connector inikezelwa kunye nale yunithi. KUBALULEKILEYO: Faka indawo yefuse kuphela ngohlobo olufanayo kunye nokulinganisa! Ukuba ifyuzi ivuthela ngokuphindaphindiweyo nceda uqhagamshelane neziko lenkonzo eligunyazisiweyo!

KWI-LED

Ikhanyisa xa amandla elayitiwe kwaye intambo yombane iqhagamshelwe ngokuchanekileyo.

I-LED YOMqondiso

Iyalayita xa iyunithi ifumana isignali yesandi.

UMDA LED

Iyalayita xa isandisi-lizwi sisebenza kumda waso. Ukuqhwanyaza kwexesha elifutshane le-LED akubalulekanga.Ukuba i-limiter ye-LED ikhanyisa ixesha elide kunomzuzwana omfutshane okanye ngokusisigxina (= ngaphezulu-ukuqhuba inkqubo), ukunciphisa umthamo womthombo wesignali odibeneyo. Ukungathotyelwa kwe-co kuya kukhokelela kwisandi esingathandekiyo nesigqwethekileyo kwaye kunokubangela ukungasebenzi kakuhle kwenkqubo yesithethi.

IPHAneli Engasemva LDDAVE12G³ (KUBONILE) & LDDAVE15G³

IMIBA YOLAWULO

INQANABA ELIPHAMBILI

Ulawulo lwevolyum engundoqo ye-2.1 yesixokelelwano sesandisi-lizwi. Umthamo we-subwoofer kunye neesathelayithi ezichaphazelekayo ngendlela efanayo.

ISIGABA ESINYE

Iguqula inqanaba le-subwoofer (0 °, 180 °).

INQANABA ENGANSI

Ukulawulwa komthamo we-subwoofer. Lungisa umthamo we-subwoofer ngokumalunga neesathelayithi. Indawo ecetyiswayo yeziko lokumisela (12:00h).

Igalelo lomgca (EKHOHLWE/EKUDENI)

Igalelo lomgca we-RCA ongalinganiyo.

Igalelo lomgca (EKHOHLWE/EKUDENI)

I-Balanced XLR/6.3 mm jack (combo) igalelo lomgca.

HLALA AMANDLA APHUMILE (EKHOHLWE/EKUDENI

Imveliso ehambelanayo ye-Speakon yoluhlu lwe-LD DAVE G³

ISIPHUMO ESIBHALWE NGQONDO (EKHOHLO / EKUDENI)

Imveliso ye-XLR elungelelanisiweyo ekuvumela ukuba uqhagamshelane nesandisi-lizwi esisebenzayo njl njl.

AMANDLA

Amandla ON/OFF switsha. Phambi kokuba uvule umbane, zonke izilawuli zenqanaba kufuneka zisetelwe kubuncinci.

I-SOCKET EPHAMBILI (i-VOLEX POWER PLUG)

Ngomphathi we-fuse eyakhelwe-ngaphakathi uxhulumaniso lwe-AC nge-IEC isinxibelelanisi (220 - 240V AC). Intambo yamandla ene-lockable Volex connector inikezelwa kunye nale yunithi. KUBALULEKILEYO: Faka indawo yefuse kuphela ngohlobo olufanayo kunye nokulinganisa! Ukuba ifyuzi ivuthela ngokuphindaphindiweyo nceda uqhagamshelane neziko lenkonzo eligunyazisiweyo!

KWI-LED

Ikhanyisa xa amandla elayitiwe kwaye intambo yombane iqhagamshelwe ngokuchanekileyo.

I-LED YOMqondiso

Iyalayita xa iyunithi ifumana isignali yesandi.

UMDA LED

Iyalayita xa isandisi-lizwi sisebenza kumda waso. Ukuqhwanyaza kwexesha elifutshane le-LED akubalulekanga.Ukuba i-limiter ye-LED ikhanyisa ixesha elide kunomzuzwana omfutshane okanye ngokusisigxina (= ngaphezulu-ukuqhuba inkqubo), ukunciphisa umthamo womthombo wesignali odibeneyo. Ukungathotyelwa kwe-co kuya kukhokelela kwisandi esingathandekiyo nesigqwethekileyo kwaye kunokubangela ukungasebenzi kakuhle kwenkqubo yesithethi.

KHUSELA I-LED

Ikhanyisa xa iyunithi igcwala kakhulu / ishushu kakhulu. AmpI-lifier itshintshela ukuthulisa ngokuzenzekelayo. Iyunithi iya kubuyela kwimodi yokusebenza phantsi kweemeko eziqhelekileyo emva kwemizuzu embalwa.

INGCACISO

		I-LDDAVE15G3	I-LDDAVE12G3	I-LDDAVE10G3
Uhlobo lweMveliso:		PA inkqubo epheleleyo	PA inkqubo epheleleyo	PA inkqubo epheleleyo
Uhlobo:		inikwe amandla, iDSP ilawulwa	inikwe amandla, iDSP ilawulwa	inikwe amandla, iDSP ilawulwa
Max. I-SPL iyaQhuba:	dB	121	117	115
Max. Incopho ye-SPL:		132	130	126
Uluhlu lokuphindaphinda:	Hz	35 – 19,000	37 – 20,000	45 – 19,000
Ukusasazwa (H x V): °	°	90 x 40	90 x 50	70 x 70
ISUBWOOFER
Ubungakanani beWoofer:	“	15	12	10
Ubungakanani beWoofer:	mm	381	304.8	254
Imagnethi yeWoofer:		ferit	ferit	ferit
Uphawu lweWoofer:		Yenzele okuthile	Yenzele okuthile	Yenzele okuthile
Ikhoyili yelizwi leWoofer:	“	3	2.5	2
Ikhoyili yelizwi leWoofer: mm		76.2	63.5	50.8
Uyilo lweKhabhinethi:		i-bass reflex	i-bass reflex	i-bass reflex
Izinto zeKhabhinethi:		18 mm yeplywood	15 mm yeplywood	15 mm MDF
Umphezulu weKhabhinethi:		ipeyinti yokwakheka	ipeyinti yokwakheka	ipeyinti yokwakheka
Ububanzi:	mm	480	435	345
Ubude:	mm	570	500	430
Ubunzulu:	mm	635	540	460
Ubunzima:	kg	41.5	31.5	19.5
Iimbonakalo:		I-LD SYSTEMS izibambo eziguqukayo, i-flange enemisonto (M20)	I-LD SYSTEMS izibambo eziguqukayo, i-flange enemisonto (M20)	I-LD SYSTEMS izibambo eziguqukayo, i-flange enemisonto (M20)
INKQUBO YOMID/HI
Ubungakanani beSithethi esiphakathi:	“	8	6.5	5.25
Ubungakanani beSithethi esiphakathi	mm	203.2	165.1	133.4
I-Magnet yeSithethi esiphakathi		ferit	ferit	ferit
I-Midrange Speaker Brand:		Yenzele okuthile	Yenzele okuthile	Yenzele okuthile
Ikhoyili yelizwi yeSithethi esiphakathi:	“	1.5	1.75	1
Ilizwi leSithethi esiphakathi Ikhoyili:	mm	38.1	44.5	25.4
Uphondo:		CD uphondo	CD uphondo	Radial
Ubungakanani bomqhubi we-HF:	“	1	1	1
Ubungakanani bomqhubi we-HF:	mm	25.4	25.4	25.4
Imagnethi yomqhubi weHF:		ferit	ferit	neodymium
Uhlobo lomqhubi weHF:		Yenzele okuthile	Yenzele okuthile	Yenzele okuthile
Ikhoyili yelizwi yomqhubi weHF:	“	1	1	1
Ikhoyili yelizwi yomqhubi weHF:	mm	25.4	25.4	25.4
Imedance Mid/Hi Inkqubo:	Ohm	4	4	4
I-Mid/Hi Input Connector Isithethi:		I-Speakon iyahambelana	I-Speakon iyahambelana	I-Speakon iyahambelana
Uyilo lweKhabhinethi Maphakathi/Mhle:		itywiniwe
Izinto zeKhabhinethi Mid/Hi Inkqubo:		15 mm yeplywood
Umphezulu weKhabhinethi Mid/Hi Inkqubo:		ipeyinti yokwakheka
Ububanzi:	mm	275	250	200
Ubude:	mm	430	400	300
Ubunzulu:	mm	260	250	230
Ubunzima:	kg	9.7	8.5	4
Iimpawu zeMid/Hi System:		izibambo ezigayiweyo ze-ergonomic, yima inkxaso adjustable ngokuthe nkqo (SM707)	isibambo esigayiweyo se-ergonomic, yima inkxaso adjustable ngokuthe nkqo (SM707)	isibambo esigayiweyo se-ergonomic, Inkxaso yokuma (5° ithathiwe)
AMP IMODYULI (IHLANGANISIWE KWI-SUBWOOFER)
Ampingcaciso:		Udidi A / B	Udidi A / B	Udidi A / B
Inkqubo yaMandla (RMS):	W	700	500	350
Inkqubo yaMandla (Incopho):	W	2,800	2,000	1,400
Ukhuseleko:		isekethe emfutshane, yangoku, umda	isekethe emfutshane, yangoku, umda	isekethe emfutshane, yangoku, umda
Inkqubo yokupholisa:		fan	fan	isinki yobushushu
Ulawulo:		Umthamo, iNqanaba, i-180 ° iSigaba sokuBuyisa, Vula / Vala uTshintsho	Umthamo, iNqanaba, i-180 ° iSigaba sokuBuyisa, Vula / Vala uTshintsho	Umthamo, iNqanaba, i-180 ° iSigaba sokuBuyisa, Vula / Vala uTshintsho
Iimpawu:		Vula, Umqondiso, uMda, Khusela	Vula, Umqondiso, uMda, Khusela	Ivuliwe, Umqondiso, uMda
Ukunikezwa Amandla:		isitshintshi	isitshintshi	isitshintshi
Umsebenzi weVoltage:		I-220 V AC - 240 V AC	I-220 V AC - 240 V AC	I-220 V AC - 240 V AC
Ungeniso Lomgca weStiriyo:		XLR/Jack 6.3 mm (combo), RCA	XLR/Jack 6.3 mm (combo), RCA	XLR/Jack 6.3 mm (combo), RCA
Iziphumo zomgca weStiriyo:		XLR	XLR
Iziphumo zeStereo Powered Maphakathi/Mholo:		I-Speakon iyahambelana	I-Speakon iyahambelana	I-Speakon iyahambelana

IZIBHENGEZO ZOMVELISI

ISIQINISEKISO SOMVELISI KUNYE NEMIDA YOXANDUVA

Ungafumana iimeko zethu zangoku zewaranti kunye nemida yoxanduva apha: http://www.adamhall.com/media/shop/downloads/documents/manufacturersdeclarations.pdf. Ukucela inkonzo yewaranti yemveliso, nceda uqhagamshelane noAdam Hall GmbH, Daimler Straße 9, 61267 Neu Anspach /
I-imeyile: Info@adamhall.com / +49 (0)6081 / 9419-0.

UKULAHLWA NGOKUCHANEKILEYO KWALE MVELISO
(esebenzayo kwiManyano yaseYurophu nakwamanye amazwe aseYurophu anenkqubo eyahlukileyo yokuqokelelwa kwenkunkuma) Olu phawu kwimveliso, okanye kumaxwebhu alo lubonisa ukuba isixhobo asinakuphathwa njengenkunkuma yasekhaya. Oku kukuthintela umonakalo wokusingqongileyo okanye ukwenzakala komntu ngenxa yokulahlwa kwenkunkuma okungalawulekiyo. Nceda ulahle le mveliso ngokwahlukileyo kwenye inkunkuma kwaye iphinde isetyenziswe ukukhuthaza umsebenzi woqoqosho oluzinzileyo. Abasebenzisi bamakhaya kufuneka baqhagamshelane nokuba kumthengisi apho bathenge khona le mveliso, okanye i-ofisi yabo yorhulumente wengingqi, ngeenkcukacha malunga nendawo kunye nendlela abanokusebenzisa ngayo ngokutsha le nto ngendlela ehambelana nokusingqongileyo. Abasebenzisi beshishini kufuneka baqhagamshelane nomthengisi wabo kwaye bajonge imigaqo nemiqathango yekhontrakthi yokuthenga. Le mveliso akufuneki ixutywe nenye inkunkuma yorhwebo ukuze ilahlwe.

INGXELO yeFCC
Esi sixhobo sithobela iCandelo le-15 leMithetho yeFCC. Umsebenzi uxhomekeke kwezi meko zimbini zilandelayo:
(1) Esi sixhobo asinakubanga ukuphazamiseka okuyingozi, kunye
(2) Esi sixhobo kufuneka samkele naluphi na uphazamiseko olufunyenweyo, kubandakanywa uphazamiseko olunokubangela ukusebenza okungafunekiyo

CE Ukuthotyelwa
UAdam Hall GmbH uthi le mveliso idibana nezi zikhokelo zilandelayo (apho zisebenza khona):
I-R&TTE (1999/5/EC) okanye iRED (2014/53/EU) ukususela ngoJuni 2017
Umthamo ophantsitagi-e (2014/35/EU)
Umyalelo we-EMV (2014/30/EU)
I-RoHS (2011/65/EU)
Isibhengezo esipheleleyo sokuthobela sinokufumaneka ku-www.adamhall.com.
Ngaphaya koko, unokubhekisa kumbuzo wakho ku info@adamhall.com.

Adam Hall GmbH | Daimlerstrasse 9 | 61267 Neu-Anspach | Jemani
Tel. +49(0)6081/9419-0 | Fax +49(0)6081/9419-1000
web : www.adamhall.com | imeyile : imeyile@adamhall.com

Amaxwebhu / Izibonelelo

IINKQUBO ZE-LD LD DAVE G3 Series Active 2.1 DSP Based PA System [pdf] Incwadi yokusebenzisa I-LD DAVE G3 Series Active 2.1 DSP Based PA System, LD DAVE G3 Series, Active 2.1 DSP Based PA System, 2.1 DSP Based PA System, DSP Based PA System, Based PA System, PA System

Iimbekiselo

• Incwadi yokusebenzisa