Kinan LC1719-series Rackmount KVM Console
Ulwazi lweMveliso
Iinkcukacha
- Umzekelo: I-Rackmount KVM Console
- Izibuko ezifumanekayo: 8 Port / 16 Port / 24 Port / 32 Port
- Umenzi: IShenzhen Kinan Technology Co., Ltd
- Umhla woShicilelo: 2024/10
- Inguqulelo: V5.5
Ngaphezuluview
Inkcazo:
I-console ye-KVM idibanisa ii-multi-port CAT5 KVM switch kwi-console yobude obuyi-1U. Iikhompyuter ezininzi zinokulawulwa kwi-monitor-keyboard-mouse console. Ukufakela kuyakhawuleza kwaye kulula ngaphandle kwesidingo soqwalaselo lwesoftware.
Iimbonakalo:
- 17 & 19 LCD TFT esweni kunye nokukhanya okuphezulu kunye nesisombululo
- Metal 19 rack kunye ukuphakama 1U
- I-Ultra slim 99 yezitshixo zekhibhodi (PS/2) enekhibhodi yamanani amancinci
- I-high-resolution touchpad enamaqhosha amabini omsebenzi kunye nevili lokuskrola
- Ixhasa VGA/HDMI/DVI/DP abancedisi beezibuko
- Ixhasa iinkqubo ezininzi: Windows, Linux, Mac, kunye neLanga
- Ukhuseleko lwe-password olunenqanaba ezimbini lokufikelela okugunyazisiweyo
- Ukutshintsha ikhompyuter ngokulula ngamaqhosha epaneli ephambili, amaqhosha ashushu, imenyu yeOSD, okanye imouse
- Isici sokuskena ngokuzenzekelayo sokujonga iikhompyuter ezikhethwe ngumsebenzisi
- Ikhibhodi kunye nomsebenzi wokulinganisa imouse
- Ukulinganisa i-USB okanye i-PS/2 yebhodi yezitshixo yekhompyutha naxa i-console igxile kwenye indawo
- Iplagi eshushu - yongeza okanye ususe iikhompyuter ngaphandle kokunciphisa iswitshi
Ufakelo lweHardware
- Ukunyuswa kweRakhi: Landela umzobo wofakelo onikezwe kwincwadi yomsebenzisi ukufaka ngokukhuselekileyo ikhonsoli ye-KVM kwindawo yokubeka. Qinisekisa ulawulo olululo lwentambo yokuseta ngokufanelekileyo.
- Iadaptha ye-KVM: Xhuma iikhomputha ezininzi usebenzisa i-RJ-45 izixhumanisi kunye neentambo ze-CAT5. Umgama wothumelo ufikelela kwi-100M, ukuphelisa imfuno ye-KVM extender.
Ukusebenza
- Imiyalelo yokuSebenza kwe-LED: Jonga kwincwadi yomsebenzisi ngesikhokelo esineenkcukacha malunga nokutolika izikhombisi ze-LED malunga nobume benkqubo.
- Ukusebenza kwe-OSD: Khangela kwi-On-Screen Display (OSD) imenyu ukufikelela kwiindlela ezahlukeneyo zokulawula kunye nezicwangciso zokulawula ngokufanelekileyo iikhomputha ezixhunyiwe.
FAQ
- Umbuzo: Ndingakwazi ukulawula iikhompyuter ezininzi ezineenkqubo ezahlukeneyo zokusebenza ndisebenzisa le khonsoli ye-KVM?
A: Ewe, ikhonsoli ye-KVM ixhasa iinkqubo ezininzi ezibandakanya iWindows, iLinux, iMac, kunye neLanga. - Q: Bangaphi abasebenzisi abanokufikelela kwiikhompyuter ezidityanisiweyo ngepro eyahlukileyofiles?
A: Ukuya kuthi ga kubasebenzisi abane kunye nomlawuli unokuba nepro eyahlukileyofiles ngokhuseleko lwegama eliyimfihlo elinemigangatho emibini yofikelelo olukhuselekileyo.
Inkcazo
- Ikhonsoli ye-KVM idibanisa izitshixo ezininzi ze-CAT5 KVM kwi-console yobude obuyi-1U. Iikhompyuter ezininzi zinokulawulwa kwi-monitor-keyboard-mouse console.
- Kulula kwaye kuyakhawuleza ukufaka i-CAT5 KVM console; kufuneka nje udibanise iintambo ezihambelanayo kumazibuko afanelekileyo eCAT5 KVM kunye nemodyuli yayo ngaphandle koqwalaselo lwesoftware.
- Ikhonsoli ye-KVM inokudibanisa iikhomputha ezininzi ezineziqhagamshelo ze-RJ-45 kunye neentambo zokudibanisa i-CAT5. Umgama wothumelo ufikelela kwi-100M, ngoko ayifuni i-KVM extender.
Iimbonakalo
- 17" &19" LCD TFT monitor, ukukhanya okuphezulu, isisombululo esiphezulu
- I-Metal 19" rack enobude obuyi-1U
- I-Ultra slim 99 yezitshixo zekhibhodi (PS/2) enekhibhodi yamanani amancinci
- Isisombululo esiphezulu kunye nokuguquguquka okuphezulu kunye ne-touchpad; ngamaqhosha amabini omsebenzi kunye nevili lokuskrola, umgangatho we-PS/2 port
Tshintsha Imisebenzi
- Ukufikelela kunye nokulawula ukuya kuthi ga kwi-8/16/24/32 computes
- Iiseva zenkxaso ezineVGA/HDMI/DVI/DP port
- Ixhasa iinkqubo ezininzi: Windows, Linux, Mac, kunye neLanga
- Amanqanaba amabini okhuseleko-abasebenzisi abagunyazisiweyo kuphela view kunye nokulawula iikhompyutha; ukuya kuthi ga kubasebenzisi abane kunye nomlawuli onepro eyahlukileyofile yanganye
- Ukutshintsha ikhompyuter ngokulula ngamaqhosha epaneli ephambili, amaqhosha ashushu, imenyu yeOSD, okanye imouse
- Umsebenzi wokuskena ngokuzenzekelayo ukujonga iikhompyuter ezikhethwe ngumsebenzisi
- Imowudi yosasazo-imisebenzi eyenziwa ngaxeshanye kuzo zonke iikhompyuter ezikhethiweyo
- Ikhibhodi kunye nomsebenzi wokulinganisa imouse.
- I-USB okanye i-PS/2 ikhibhodi yokuxelisa-ukuvula ikhompyutha nokuba i-console igxile kwenye indawo
- Ipluggable eshushu ‐ ‐ yongeza okanye ususe iikhompyutha ngaphandle kokwenza umbane ezantsi iswitshi
Ngaphambili View
- Imodyuli ye-LCD
- Ngasemva Bracket Slot
- Ulawulo lwe-OSD
- Isibiyeli esingaphambili
- Ikhibhodi
- Iphedi yokuchukumisa
- Phatha
- Khulula ukubamba
- Iphaneli yokubonisa
- Tshintsha i-LED
Ubume kunye nobukhulu
Ubume kunye nobukhulu (17”)
Ubume kunye nobukhulu (19”)
Ngasemva View
|
Hayi. |
Ingcaciso |
| 1 | Igalelo lamandla (AC okanye DC) |
| 2 | Ukutshintsha Amandla |
| 3 | Izibuko le-USB |
| 4 | Jonga iPort |
| 5 | I-PC yokudibanisa izibuko |
| 6 | Isikrufu sokudibanisa umhlaba |
Ufakelo lweHardware
Ukubeka phezulu
- Ikhithi yokuxhoma ye-rack eqhelekileyo ibonelelwe ukufaka iswitshi kubunzulu be-600-850mm.
(17〞), 716–825mm (19〞) kwindawo eqhelekileyo ye-19” rack. - Kweminye imigama enyukayo, izibiyeli ezingasemva kufuneka zenziwe ngokufanelekileyo Ngomnye umntu obambe iswitshi endaweni kwaye omnye umntu utyibilika isibiyeli se-L kwizibiyeli zecala lokutshintsha ukusuka ngaphambili ukuya ngasemva, emva koko ujike izibiyeli kwindawo yokubeka. (jonga ngezantsi umzobo wofakelo)
Umzobo woFakelo
- Qinisekisa ukuba ikhonsoli ye-KVM iqhagamshelwe emhlabeni.( ①)
- Qhagamshela naliphi na izibuko le-KVM elikhoyo kunye neadaptha ye-KVM ngeentambo ze-CAT5.( ②)
- Qhagamshela iadaptha kwi-KVM kunye nePC okanye umncedisi(③)
- Xhuma izibuko lomfazi lentambo yamandla kwisokethi yamandla ye-KVM, kwaye uplage izibuko lendoda kwizibuko lamandla le-AC.( ④)
Phawula:
- Qhagamshela ikhibhodi yangaphandle ye-USB, imawusi, kwaye ubeke iliso ngokwe(⑥)nyathelo lokungena
- Ukuba i-cascading iyadingeka, nceda udibanise i-console ye-KVM kunye ne-KVM yokutshintsha kunye ne-adapter (⑦), kwaye i-Hotkey kufuneka ihluke kwi-console ye-KVM kunye ne-KVM.
Nceda ujonge isethingi ye hotkey
- Cima umsebenzi weHotkey yeMouse (F4: Isixhobo ->IMouse eshushu【Vula】)
- Ukusetwa kwesitshixo se-keyboard (F3: Cwangcisa -> i-OSD Hotkey)
- 【Izitshixo zokutshixa】 +【Izitshixo zokutshixa】
- 【F12】 +【F12】
- 【Ctrl】+【Ctrl】+【KVM Hotkey】
Iadaptha ye-KVM
Iadaptha yePS/2
| Umzekelo No. | Ikhibhodi / iMouse | PC | Ingcaciso |
| I-KCM-1100P | PS/2 | VGA | Qhagamshela kwi-PS2 / VGA iseva |
Iadaptha ye-USB
| Umzekelo No. | Ikhibhodi / iMouse | PC | Ingcaciso |
| CM-1200U | i-USB | VGA | Qhagamshela kwiseva ye-USB/VGA |
| I-KCM-3200H | i-USB | HDMI | Qhagamshela kwiseva ye-USB/HDMI |
| I-KCM-2200D | i-USB | DVI | Qhagamshela kwiseva ye-USB/DVI |
| I-KCM-4200P | i-USB | DP | Qhagamshela kwiseva ye-USB/DP |
Itheyibhile 1: Isalathisi se-LED se-KVM Adapter
| Amacandelo | Umsebenzi | |
| Luhlaza | Kwi-intanethi | Ibonisa ukuba umamkeli ohambelanayo uqhagamshelwe kwiswitshi ye-KVM kunye ne-Power On. |
| Orenji | Ikhethiwe | Ibonisa ukuba umamkeli ohambelanayo uyasetyenziswa. |
Ukusebenza
Khulula ukubambiswa kokukhulula;
Phawula: Isitshixo sokukhulula sinokwenza kuphela ukutshixa okuthe tyaba, akukwazi ukuthwala nawuphi na umthwalo.
- Tsala ikhonsoli ye-KVM yonke indlela yokuphuma ide icofe kwindawo;
- Jikelezisa imodyuli yeLCD ngasemva ukuze uveze isikrini seLCD; imodyuli yeLCD inokujikeleziswa ukuya kuthi ga kwi-108 °.
- I-KVM yenza izandi ezimbini ze-"beep" emva kokukhanyisa, iwindow ye-OSD ibonakala ukuba ufake igama lakho lomsebenzisi kunye negama lokugqitha.
- 8 Izibuko / 16 Izibuko: I-orenji ye-LED kunye netyhubhu ye-LED iyadanyaza phambi kokuba ufake igama eliyimfihlo.
- 24 Izibuko / 32 Izibuko:
ivela kwityhubhu ye-LED ngaphandle kwegama lomsebenzisi kunye negama lokugqitha.
- Iphaneli ye-LED iyasebenza xa amandla e-LED aluhlaza.
- Amandla kwikhompyuter okanye kwiseva emva kwamandla kwi-KVM.
- I-8 Port / 16 Port: I-LED ye-port edibeneyo iluhlaza.
- 24 Port / 32 Port: Akukho zibuko LED.
- Igama lokugqitha elimiselweyo lomzi-mveliso alinanto; cofa kabini “Faka “ukungena.
- PHAWULA: Igama lomsebenzisi kunye negama lokugqitha azikho ngaphezu koonobumba abali-16, Cinezela kwaye ubambe iqhosha elithi Shift ukuchwetheza unobumba abancinane.
- Nceda uqhagamshelane nomvelisi ngenkxaso ukuba i-KVM itshixiwe.
Ukuvala ikhonsoli
- Vala iphaneli yokubonisa iLCD kwaye amandla avale ngokuzenzekelayo.
- Tyhila into yokubambisa kwicala lotolo; tsala iphaneli ye-LED yonke indlela ngaphakathi ide izitshixe ngokuzenzekelayo.
Uqwalaselo lwe-OSD ye-LED
I-OSD ye-LED ikuvumela ukuba umise kwaye uqwalasele umboniso we-LED.
|
Amaqhosha |
Imisebenzi |
| MENU KHETHA | Ukucofa eli qhosha kubiza umsebenzi wemenyu kwaye kuzisa imenyu engundoqo. |
|
PHUMA/NGEZENZAKALELAYO |
Cinezela eli qhosha ukuphuma kwimenyu yangoku kwaye ubuyele kwimenyu yangaphambili okanye ucinezele eli qhosha ukuphuma kwi-LED OSD. Cofa i-AUTO kuqwalaselo oluzenzekelayo. |
| SL-/SL+ | Cinezela eli qhosha ukuhambisa imenyu yakho ukwenza ehambelanayo
uhlengahlengiso. |
|
Imo ye-LED |
Luhlaza: ukubaleka
Ubomvu: cima okanye ufikelele kumqondiso weVESA ongaqhelekanga Ukukhanya okuluhlaza: imowudi yokonga amandla okanye akukho phawu |
Cinezela u-AUTO ukuba isikrini siyafuduka emva kokukhanyisa okanye phantsi kwezinye iimeko, emva koko isikrini siqwalaselwe ngokuzenzekela kwesona simo saso sokubonisa. (Isenokungalungelelaniselwa kwimeko yayo engcono ukuba inxalenye yendlela yokubonisa ayikho imowudi yeVESA eqhelekileyo, ukuba kunjalo buyela umva kwimenyu ye-OSD UKUSETHWA KWAKHONA, kwaye ke iya kubuyela kwesiqhelo. Sicebisa abathengi bethu ukuba bamise umboniso. imowudi kwi-1280 × 1024, izinga lokuhlaziya kwi
Imiyalelo yokuSebenza kwe-LED
| Hayi. | Amacandelo |
Umsebenzi |
| 1 | 1-16 | Ukutshintsha ngokukhululekileyo ukusuka kwizibuko loku-1 ukuya kwizibuko le-16 |
| Lungisa kwakhona | Cinezela u-【1】 kunye no-【2】 ngexesha elinye imizuzwana emithathu seta kwakhona ibhodi yezitshixo kunye nemouse. | |
| Skena | Cinezela 【s 7】 kunye【8】 ngexesha elinye imizuzwana emithathu faka imo yokuskena ngokuzenzekelayo. | |
Ukuqaqamba |
Cinezela u-【3】 imizuzwana emithathu ukufaka ukukhanya.
I-33 iyadanyaza kwityhubhu ye-LED. Emva koko cinezela u-【5】,【6】ukuhlengahlengisa. Cinezela【3】iphuma okanye ilinde imizuzwana emihlanu kwaye izakuphuma ngokuzenzekelayo. |
|
Ingcaciso |
Cinezela u-【4 】 ngemizuzwana emithathu ukufaka imo yokulungelelanisa inkcazo.
I-44 iyadanyaza kwityhubhu ye-LED. Emva koko cinezela u-【5】,【6】ukuhlengahlengisa. Cinezela u-【4】 phuma okanye linda imizuzwana emihlanu kwaye izakuphuma ngokuzenzekelayo |
|
Qalisa |
Cinezela u-【6】 imizuzwana emithathu iya kuqalisa ukuqaqamba kunye nenkcazo yezibuko ngalinye. | |
| 2 | Amaqhosha oKhetho lwePort kunye nee-LED | Ii-LED zesalathiso zakhelwe kwiiswitshi, ukukhanya kwe-intanethi ye-LED kusekhohlo kwaye ukukhanya okukhethiweyo kwe-LED kusekunene.
1. Ukukhanya kwe-LED ye-intanethi (okuluhlaza) kubonisa ukuba i-KVM iqhagamshele kwikhompyutheni yayo ehambelanayo kunye namandla. 2. Ukukhanya okukhethiweyo kwe-LED (i-orenji) kubonisa ukuba ikhompyutha edityaniswe kwizibuko layo elihambelanayo iphezulu kwaye iyasebenza. |
| 3 | Isazisi sesikhululo | Bonisa izibuko langoku |
Ukusebenza kweOSD
Cofa kabini iqhosha lasekunene lemouse okanye kabini cofa ihotkey【Skrola Tshixa】 ukutsala ngezantsi kwemenyu engundoqo yeOSD. Unokwenza ngokwezifiso iihotkeys zeOSD; Fumana iinkcukacha ezininzi kwimiyalelo yokusebenza kweOSD.
Ukufikelela kwimenyu yeOSD ngekhibhodi:
- Kwiimenyu ezisezantsi ezivelayo, hambisa ibar eqaqambileyo kwizibuko lakho elikhethiweyo uze ucinezele Ngena.
- Cinezela naliphi na iqhosha elisuka ku-【0‐9】ukufaka naliphi na izibuko lesikhululo sangoku
Ukufikelela kwimenyu yeOSD ngemouse:
Phawula: Sebenza ngebhodi yezitshixo emva kokutsala imenyu ye-OSD nge-touchpad.
|
Imenyu |
Izitshixo |
Imenyu engaphantsi/ingcaciso |
| ADM | F1 | Cwangcisa ukungena komsebenzisi-Seta iakhawunti yokungena yomsebenzisi kunye negama lokugqitha Seta ukufikeleleka-Seta iimvume zofikelelo ze-BRC Imowudi -jonga iikhompyuter ezininzi ngaxeshanye Layisha okuMiselweyo-seta kwakhona imenyu kwindawo yokuqala yasefektri.
izicwangciso |
|
Skena |
F2 |
Konke-Kudwelisa onke amazibuko kufakelo
Uluhlu lwamandla lusebenza kuphela kumazibuko ancamathele iikhompyuter. Ngokukhawuleza View-Udwelisa kuphela amazibuko akhethwe njengawo Ngokukhawuleza Viewamazibuko |
|
Seta |
F3 |
Ukuskena okuzenzekelayo-seta ixesha lokuskena
Isazisi se-Port-seta ukuba izibuko libonisa ixesha elingakanani kwi-OSD Hotkey-seta izitshixo ze-OSD Ixesha le-Lout off- ukuseta ixabiso lexesha |
|
Isixhobo |
F4 |
Seta kwakhona i-RGB-Cofa Faka kwakhona i-RGB
Beeper【Vula】-cofa Faka iswitsha izandi zeNyosi IMouse eshushu【Vula】-cofa u-Enter ukuvala i-touchpad esebenza kwi-OSD. Buyisela amaxabiso-cofa u-Enter kwaye ubuyisele ixabiso langoku lomsebenzisi. Malunga ne-KVM- cofa u-Enter ibonisa inguqulelo ye-KVM |
| Hlela | F6 | Hlela amagama ezibuko |
| QV | F7 | Qala okanye uvale ngokukhawuleza View |
| Isilumko | F8 | Phuma / utshixe i-KVM |
|
Phuma |
I-Esc | Cofa eli qhosha ukuphuma kwimenyu ye-OSD |
| Nyusa okutshixiwe | Cofa eli qhosha ukuphuma kwimenyu ye-OSD | |
| Inum lock | Cofa eli qhosha ukuphuma kwimenyu ye-OSD |
Isikrini sokubonisa siya kuphazamiseka ukuba intambo ye-CAT5 inde kakhulu, kule meko, unokuhlengahlengisa ngokwala manyathelo angezantsi:
- Cinezela【+】kwaye ADJ FOCUS iza kuvela, emva koko ucinezele【+】,【‐】ukuhlengahlengisa inkcazelo.
- Cinezela【，】 kwaye ADJ BRIGHT izakuvela, uze ucinezele【，】, 【.】 ukulungisa ukukhanya.
Imenyu Ngaphezuluview
Imiyalelo yokusebenza
- Cofa u【F1】okanye 【←】【→】ufaka iimenyu ezisezantsi ze F1.
- Cinezela 【↑】【↓】ihambisa ibar eqaqambileyo ukukhetha imenu esezantsi.
- Cofa u-【Enter】 khetha kwaye uphume kwimenyu yeADM.
- Cofa u【Esc】 irhoxisa ukusebenza kwaye iphume kwimenyu yeADM.
Menu Ingcaciso
- Cwangcisa ukungena komsebenzisi-Cofa 【Ngena】 khetha Cwangcisa uNgena komsebenzisi kunye neskrini njengasezantsi kumzobo 4-1.1 ibonakala:
Umlawuli omnye kunye neeakhawunti ezine zomsebenzisi zinokusetwa (Igama lomsebenzisi kunye negama lokugqitha azikho ngaphezu koonobumba abali-16, Cinezela kwaye ubambe iqhosha le-Shift ukuchwetheza oonobumba abancinane. )
- Phawula: Ungaseta iakhawunti kunye negama lokugqitha ngokwedayagram 4-1.2, emva koko u-"Setting User ok" pops up ebonisa ukuba uyenzile iseti yakho,"kwaye ukuba "iPassword Not match" iyavela, kufuneka uchwetheze igama lakho lokugqitha kwakhona. njengoko wenze kuhlobo lwakho lokuqala.
- Cwangcisa uFikelelo【Ngena】ukukhetha uSeti uFikeke, emva koko kuvela le menu ingezantsi: (umzobo 4–1.3)
Imenyu
Ingcaciso
KUGCWELE Umsebenzi wokufikelela ngokupheleleyo kwisikhululo kwaye unokwenza nawuphi na umsebenzi kumazibuko VIEW Umsebenzi wokufunda-kuphela, unokufunda kuphela izibuko kodwa awukwazi ukuyisebenzisa ukuba ucwangcise lo msebenzi. AKUKHO Ukuba ucwangcisa lo msebenzi, izibuko aliyi kuboniswa kwimenyu yomsebenzisi yeOSD - Phawula: Umlawuli uhlala enofikelelo olupheleleyo kuwo onke amazibuko.
- Umzekelo:
- Ukuba ufuna ukuseta imvume yofikelelo ye [User1], cofa u【Space】ukukhetha iinketho zemvume ofuna ukuseta.
- [Umsebenzisi1] Ngena kwimenyu ye-OSD, ngezantsi kwedayagram 4-1.5.
- Phawula: Umlawuli uhlala enofikelelo olupheleleyo kuwo onke amazibuko.
- Imo ye-BRC icimile - Cofa u- [Enter] ukufaka imo ye-BRC, ngenisa imenyu engundoqo, cofa
- 【F7】 ukongeza okanye ukucima izibuko elifuna umsebenzi wosasazo. Xa imowudi ye-BRC ichaphazeleka, isimboli yesithethi siyavela kwikholamu ye-QV. (Jonga ngezantsi imizobo).
- Ngelixa imowudi ye-BRC isebenza, sinokusebenzisa ngokuhambelanayo amazibuko ekhompyuter amaninzi.
- Phawula: Ngelixa imo ye-BRC isebenza, imouse ayivumelekanga ukuba isetyenziswe.
- Vula imo ye-BRC
【F1】->Imo ye-BRC IVULIWE-> [Faka] ‐>I-BRC Imowudi IVULIWE (umzobo 4–1.6) - Vula izibuko elifuna umsebenzi wosasazo
Cinezela【↑】【↓】 iqhosha—>khetha izibuko elifuna umsebenzi wosasazo ⇒ 【F7】 ⇒ Isimboli esithi “BC” sivela kwikholamu ye-QV ebonisa ukuba izibuko lingene kwindlela yosasazo. - Vala izibuko losasazo
Cinezela【↑】【↓】iqhosha—>khetha izibuko ⇒ Cofa 【F7】 ⇒ phuma kwimowudi ye-BRC kwaye isimboli “BC” siyanyamalala. - Phuma kwimowudi ye-BRC
Biza imenyu engundoqo ye-OSD ⇒ 【F1】‐>Imo ye-BRC IVULEKILE ‐> [Faka] ‐‐> Imo ye-BRC IVIMA, KVM phuma kwimo ye-BRC (umzobo 4–1.8)
- Vula imo ye-BRC
- Layisha Miyo-‐ cinezela [Faka] ukukhetha imenyu engaphantsi, onke amanani amiselweyo abuyiselwa kwiseto yoqobo yokusilela kwasefektri.
Imenyu Ngaphezuluview
Umyalelo wokusebenza
- Cinezela u【F2】okanye 【←】【→】ufaka iF2: iimenyu ezisezantsi.
- Cinezela 【↑】【↓】ihambisa ibar eqaqambileyo ukukhetha imenu esezantsi.
- Cofa u【Ngena】 khetha kwaye uphume kwimenyu yokuskena.
- Cofa u【Esc】 irhoxisa ukusebenza kwaye iphume kwimenyu yeSCAN.
Menu Ingcaciso
|
Imenyu engaphantsi |
Ingcaciso |
| Konke | Sebenzisa lo msebenzi ukuskena onke amazibuko ngokwexesha lekhefu lokuskena. |
| Vula amandla | Sebenzisa lo msebenzi ukuskena onke amazibuko nge“$” ngokwesithuba sokuskena esiseti. |
| Ngokukhawuleza View | Sebenzisa lo msebenzi ukuskena onke amazibuko nge "#" ngokukhawuleza view iisimboli ngokwexesha elimiselweyo lokuskena. |
Imenyu Ngaphezuluview
Imiyalelo yokusebenza
- Cofa u【F3】okanye 【←】【→】ufaka iimenyu ezisezantsi ze F3.
- Cinezela 【↑】【↓】ihambisa ibar eqaqambileyo ukukhetha imenu esezantsi.
- Cofa u【Ngena】 khetha kwaye uphume Seta imenyu.
- Cinezela u【Esc】 irhoxisa ukusebenza kwaye iphume kwiSeti yemenyu.
Menu Ingcaciso
|
Imenyu engaphantsi |
Ixabiso elimiselweyo |
| Auto Scan | 5S (uluhlu olusebenzayo 5-99) |
|
Isazisi sePort |
0S: ayibonisi isazisi sezibuko
I-1-98S: bonisa imizuzwana, ubuninzi be-98s 99S: umboniso osisigxina |
|
OSD Hotkey |
【Skrola isitshixo】+ 【Skrola isitshixo】
【Izitshixo zokutshixa】 +【Izitshixo zokutshixa】 【F12】 +【F12】 【Ctrl】+ 【Ctrl】+ 【KVM Hotkey】 |
| Ixesha lokuphumla | 0 :uphume
01-99M: seta ixesha lokuvala isikrini, likhutshelwa ngaphandle ukuba umqhubi wangoku akasasebenzi okwethutyana, emva koko i-KVM iya kutshixwa kwaye kufuneka ufake igama lomsebenzisi kunye negama lokugqitha ukuze usebenze kwakhona. |
Ukusebenza kwe-OSD Hotkey
Umyalelo wokusebenza
- Cinezela u【F3】 kwaye uhambise ibar eqaqambileyo nge【↓】 ukukhetha “i-OSD Hotkey” imenu esezantsi. Cofa u-【Ngena】 kwaye ngezantsi kwesikrini siyavela:
- I-hotkey ye-KVM engagqibekanga: 【Skrola isitshixo】
- Khetha i“Ctrl】【Ctrl】 + 【KVM Hotkey】 “ kwaye ucinezele u-Enter】, emva koko i-Ctrl】 yehotkey iyafumaneka kule modi yehotkey, ihotkey yemouse ayikwazi ukungena kwimenyu yeOSD.
Biza ihotkey: cofa kabini 【L_Ctrl】 + iqhosha lomsebenzi ohambelanayo
|
Umsebenzi |
Ukusebenza |
Inkcazo yomsebenzi |
| Ukutshintsha izibuko |
+2 amaqhosha amanani |
Umzekelo: tshintshela kwizibuko lesi-4 ngamaqhosha ashushu【L_Ctrl】+
【L_Ctrl】+【0】+【4】 |
| + F1~ F8 | Tsiba izibuko ukusuka kwi-1-8 | |
| Biza imenyu engundoqo ye-OSD | + "indawo" | Oku kukuvumela ukuba ubize i-OSD engundoqo yemenyu (bona ukusebenza kwemenyu ye-OSD) |
Imenyu Ngaphezuluview
Imiyalelo yokusebenza
- Cofa u【F4】okanye 【←】【→】ufaka iimenyu ezisezantsi ze F4.
- Cinezela 【↑】【 ↓】ihambisa ibar eqaqambileyo ukukhetha imenu engaphantsi.
- Cofa u【Ngena】 khetha kwaye uphume kwimenyu yeSixhobo.
- Cinezela u-【Esc】 irhoxisa ukusebenza kwaye iphume kwimenyu yeSixhobo.
Menu Ingcaciso
|
Imenyu engaphantsi |
Umyalelo |
| Seta kwakhona i-RGB | Buyisela umqondiso wevidiyo kwixabiso elimiselweyo. |
| Beeper【Ivuliwe】 | I-beeper inokuvulwa okanye icinywe ngalo msebenzi. |
| Impuku eshushu【Ivuliwe】 | Ukuvula nokuvala imouse ngalo msebenzi. Asikwazi ukusebenzisa i-OSD xa 【Icimile】. |
| Buyisela Imilinganiselo | Buyisela kumaxabiso angagqibekanga emizi-mveliso. |
| Malunga ne-KVM | Ibonisa ulwazi lwenguqulo ye-KVM. |
F6-Hlela amagama ezibuko
- Khetha izibuko nge【↑】【↓】 isitshixo;
- Cofa u-F6 kunye neqhosha kwigama elitsha okanye uguqule elidala, uze ucofe u-Enter ukugcina igama kwaye uphume ukuhlela.
- Cofa u-【Esc】ukurhoxisa nokuphuma kuhlelo.
Phawula:
NAME amagama aquka:
- Bonke oonobumba bealpha: A–Z
Cofa kwaye ubambe iqhosha le-Shift ukuchwetheza lo
Iileta ze-Wercase
- Onke amagama amanani: 0–9
- Ixabiso elimiselweyo: SYSTEM
F7-Seta ngokukhawuleza Viewizibuko
- Khetha izibuko ngezitshixo【↑】【↓】;
- Cinezela 【F7】 ukubandakanya izibuko langoku njengoKhawulezayo View, kwaye ke intloko yotolo ivela kwikholamu yeQV ukubonisa njalo.
Phawula:
Cinezela u【F7】 ukurhoxisa isimboli ye-QV ukuba izibuko langoku selinophawu lwe-QV olunentloko yotolo kwikholamu yalo ye-QV; ukuba ufuna ukurhoxisa yonke imisebenzi yeQV, cinezela Buyisela amaxabiso phantsi kwe F4: Isixhobo. (Igama lezibuko libuyisela kulungiselelo olungagqibekanga ngaxeshanye.)
F8-LOUT
- Cinezela i【F8】 iphuma kwimenyu ephambili yeOSD kwaye iphume ngokupheleleyo kwizibuko langoku, emva koko kuvela iwindow yokungena:
- Abasebenzisi kufuneka bangene kwakhona ukuze baphinde bafikelele kwi-OSD.
Iinkcukacha
Iinkcukacha(17〞)
| Umzekelo | LC1708 | LC1716 | LC1724 | LC1732 | |
| Uqhagamshelo kwikhompyuter | Ngqo | 8 | 16 | 24 | 32 |
| Max | 256 | 512 | 768 | 1024 | |
| Ukulinganisa izibuko | Ikhibhodi, impuku | PS/2, USB | |||
| LCD esweni | Imodeli ye-LED | SXGA TFT | |||
| View indawo | 17 “ | ||||
| Esona sisombululo | 1280×1024@60Hz | ||||
| Bonisa umbala | 16.7 M | ||||
| Ukuqaqamba | 250cd/m² (Typ) | ||||
| Umlinganiselo wokuthelekisa | 1000: 1 (Typ) | ||||
| I-pixel pitch (mm) | 0.264(H) × 0.264(W) | ||||
|
Impuku |
X/Y isisombululo | > 1000 amanqaku / intshi, (amanqaku angama-40/mm) | |||
| Roll ivili | Ixhasa umsebenzi wevili lokuskrola | ||||
| Ikhibhodi | 99 izitshixo (amaqhosha angama-82 ekhibhodi engundoqo +17 inombolo encinci yenombolo ezimeleyo) |
||||
| Ukukhetha izibuko | amaqhosha, hotkeys, OSD menu | ||||
| Igalelo lamandla | 100V- 240Vac , 50-60Hz , <1.5A | ||||
| Ukutya umbane | 19W | 20W | 21W | 22W | |
| Umgama onyukayo | 600~850mm ( L=420mm)
Iintsimbi zokukhwela zingenziwa ngokwezifiso zeminye imigama enyukayo. |
||||
| Ubushushu bokusebenza | 0 - 50 ℃ | ||||
| Gcina ubushushu | -20 —60 ℃ | ||||
| Ukufuma | I-0-80% ye-RH, i-non-condensing | ||||
| Ukusinda okushiyekile | 12.8kg | 12.8 kg | 13kg | 13kg | |
| Ubungakanani bemveliso (W × D × H) | 448mm×581mm×42.5mm | ||||
| Ubungakanani bephakheji (W × D × H) | 765mm×615mm×185mm | ||||
| Igalelo lamandla okuzikhethela | -36V ~ -72V DC | ||||
Iinkcukacha (19〞)
| Umzekelo | LC1908 | LC1916 | LC1924 | LC1932 | ||
| Uqhagamshelo kwikhompyuter | Ngqo | 8 | 16 | 24 | 32 | |
| Max | 256 | 512 | 768 | 1024 | ||
| Ukulinganisa izibuko | Ikhibhodi, impuku | PS/2, USB | ||||
|
LCD esweni |
Imodeli ye-LED | SXGA TFT | ||||
| View indawo | 19″ | |||||
| Esona sisombululo | 1280×1024@60Hz | |||||
| Bonisa umbala | 16.7 M | |||||
| Ukuqaqamba | 250cd/m² (Typ) | |||||
| Umlinganiselo wokuthelekisa | 1000: 1 (Typ) | |||||
| I-pixel pitch (mm) | 0.2928(H) × 0.2928(W) | |||||
|
Impuku |
X/Y isisombululo | > 1000 amanqaku / intshi, (amanqaku angama-40/mm) | ||||
| Iphedi yokuchukumisa enebhola yomkhondo | Iphelisa imfuno ye mouse yangaphandle | |||||
|
Ikhibhodi |
99 izitshixo
(82 izitshixo eziphambili zekhibhodi +17 ezizimeleyo iphedi yamanani amancinci) |
|||||
| Ukukhetha izibuko | amaqhosha, hotkeys, OSD menu | |||||
| Igalelo lamandla | 100V- 240Vac , 50-60Hz , <1.5A | |||||
| Ukutya umbane | 20W | 21W | 22W | 23W | ||
|
Umgama onyukayo |
716~825mm ( L=262mm)
Iintsimbi zokukhwela zingenziwa ngokwezifiso zeminye imigama enyukayo. |
|||||
| Ubushushu bokusebenza | 0 - 50 ℃ | |||||
| Gcina ubushushu | -20 —60 ℃ | |||||
| Ukufuma | I-0-80% ye-RH, i-non-condensing | |||||
| Ukusinda okushiyekile | 13.4kg | 13.4kg | 13.6kg | 13.6kg | ||
| Ubungakanani bemveliso (W × D × H) | 448mm×605mm×42.5mm | |||||
| Ubungakanani bephakheji (W × D × H) | 765mm*615mm*185mm | |||||
| Igalelo lamandla okuzikhethela | -36V～ -72V DC | |||||
@onke amalungelo agciniwe Shenzhen Kinan Technology Co., Ltd. www.kinankvm.com.
Amaxwebhu / Izibonelelo
 |
Kinan LC1719-series Rackmount KVM Console [pdf] Incwadi yokusebenzisa LC1719-series, LC1719-series Rackmount KVM Console, LC1719-series, Rackmount KVM Console, KVM Console, Console |