iSMACONTROLLI SFAR-S-ETH Modbus TCP-IP ukuya kwiModbus RTU-ASCII Gateway Imiyalelo
Imixholo
fihla
INGCACISO
| Ukunikezwa Amandla | Umqulutage | 10-38 V DC; 10-28 V AC |
| Ukutya umbane | 7 W @ 24 V DC 9 VA @ 24 V AC | |
| Amagalelo edijithali | 4x, ingqiqo '0': 0-3 V, ingqiqo '1': 6-36 V | |
| Isolation 3650 Vrms | ||
| Relay iziphumo | 3x Relay iziphumo | |
| Umthwalo oxhathisayo AC1: 3 A @ 230 V AC okanye 3 A @ 30 V DC | ||
| Umthwalo osebenzayo AC3. 75 VA @ 230V AC okanye 30 W @ 30 V DC | ||
| Izinto zoqhagamshelwano AgSnO2 | ||
| Ujongano | RS485, ukuya kuthi ga kwizixhobo ezili-128 ebhasini | |
| Ethernet 10/100 Mbps | ||
| izinga lobubi | ukusuka 2400 ukuya 115200 bps | |
| Ukhuseleko lokungena | IP40 – yofakelo lwangaphakathi | |
| Ubushushu | Ukusebenza -10 ° C - +50 ° C; Ugcino – 40°C – +85°C | |
| Ubuntu bezizalwane | I-5 ukuya kwi-95% ye-RH (ngaphandle kokudibanisa) | |
| Izihlanganisi | Ubukhulu 2.5 mm2 | |
| Ubungakanani | 119,1 mm x 101 mm x 22,6 mm | |
| Ukunyuka | I-DIN yokunyuswa kukaloliwe (DIN EN 50022) | |
| Izinto zendlu | Iplastiki, iPC/ABS ezicimayo | |
IPhaneli ephezulu
IZIBONELELO ZEDIJALI
- Uqhagamshelo longeniso
IZIPHUMO ZOKUNIKEZELELA
- Ukudityaniswa komthwalo ochasayo
- Ukudibanisa kwe-electrovalve
UNXIBELELWANO
- RS485 unxibelelwano
UKUNIKEZWA AMANDLA
- I-DC Voltage
- AC Voltage
ISILUMKISO
- Qaphela, i-wiring engalunganga yale mveliso inokuyonakalisa kwaye ikhokelela kwezinye iingozi. Qinisekisa ukuba imveliso ifakwe ngokuchanekileyo iintambo phambi kokuba uvule umbane.
- Phambi kocingo, okanye ukususa/ukunyuswa kwemveliso, qiniseka ukuba Ucime umbane. Ukusilela ukwenza oko kunokubangela ukothuka kombane.
- Sukubamba iindawo ezitshajwa ngombane njengeetheminali zombane. Ukwenza oko kunokubangela ukothuka kombane.
- Musa ukuyichitha imveliso. Ukwenza oko kunokubangela ukothuka kombane okanye ukusebenza kakubi.
- Sebenzisa imveliso ngaphakathi koluhlu lokusebenza olucetyiswayo kwinkcazo (ubushushu, ukufuma, umthamotage, ukothuka, indlela yokunyuka, umoya, njl. njl.). Ukusilela ukwenza oko kunokubangela umlilo okanye umsebenzi ongalunganga.
- Gxininisa ngokuqinileyo iingcingo kwi-terminal. Ukungaqini ngokwaneleyo kweengcingo kwitheminali kunokubangela umlilo
IZITHOMBE ZESIXHOBO
Ufikelelo olubhalisiweyo
| Modbus | Disemba | Hex | Bhalisa Igama | Ukufikelela | Inkcazo |
| 30001 | 0 | 0x00 | Uguqulelo/Uhlobo | Funda | Inguqulelo kunye noHlobo lwesixhobo |
| 30002 | 1 | 0x01 | Idilesi | Funda | Idilesi yemodyuli SFAR-S-ETH |
| 40003 | 2 | 0x02 | Ireyithi yeBaud | Funda ubhale | Isantya sothumelo |
| 40004 | 3 | 0x03 | Misa amasuntswana | Funda ubhale | Misa amasuntswana |
| 40005 | 4 | 0x04 | Ukulingana | Funda ubhale | Ukulingana |
| 40007 | 6 | 0x06 | Indlela yeModbus | Funda ubhale | Uhlobo lweprotocol yeModbus |
| 40009 | 8 | 0x08 | Umlindi | Funda ubhale | Umsebenzi womlindi weziphumo [ms] |
| 40013 | 12 | Ngama-0x0C | Imeko yeZiphumo eziMiselweyo | Funda ubhale | Imeko emiselweyo yebitslit → imveliso esebenzayo |
| 40014 | 13 | 0x0D | Imo yokusebenza | Funda ubhale | Imowudi ye-Modbus TCP0 – Itheyibhile yeSixhobo; 1 – Gateway Modbus TCP |
| 40015 | 14 | 0x0E | Ireyithi ecothayo | Funda ubhale | Ukuphindaphinda kwemibuzo kwimowudi yeTheyibhile yeSixhobo [ms] |
| 40016 | 15 | 0x0F | Ireyithi eqhelekileyo | Funda ubhale | Ukuphindaphinda kwemibuzo kwimowudi yeTheyibhile yeSixhobo [ms] |
| 40017 | 16 | 0x10 | Isantya esikhawulezayo | Funda ubhale | Ukuphindaphinda kwemibuzo kwimowudi yeTheyibhile yeSixhobo [ms] |
| 40033 | 32 | 0x20 | Iipakethi ezifunyenweyo ze-LSR (Ubuncinci buBalulekileyo.) | Funda ubhale | Isixa seepakethi ezifunyenweyo |
| 40034 | 33 | 0x21 | Iipakethi ezifunyenweyo ze-MSR (Eyona Reg.) |
Funda ubhale | |
| 40035 | 34 | 0x22 | Iipakethe ezingalunganga ze-LSR | Funda ubhale | Isixa seepakethi ezifunyenweyo ezingachanekanga |
| 40036 | 35 | 0x23 | Iipakethe ezingalunganga ze-MSR | Funda ubhale | |
| 40037 | 36 | 0x24 | Iipakethi ezithunyelweyo ze-LSR | Funda ubhale | Isixa seepakethi ezithunyelweyo |
| 40038 | 37 | 0x25 | Iipakethi ezithunyelweyo ze-MSR | Funda ubhale | |
| 30051 | 50 | 0x32 | Igalelo | Funda | Ubume begalelo kancinane → ungeniso olusebenzayo |
| 40052 | 51 | 0x33 | Iziphumo | Funda ubhale | Ubume beziphumo |
| 40053 | 52 | 0x34 | Ikhawuntara ye-0 LSR | Funda ubhale | 32-bits counter 0 |
| 40054 | 53 | 0x35 | Ikhawuntara yoku-0 ye-MSR | Funda ubhale | |
| 40055 | 54 | 0x36 | Ikhawuntara ye-1 LSR | Funda ubhale | 32-bits counter 1 |
| 40056 | 55 | 0x37 | Ikhawuntara yoku-1 ye-MSR | Funda ubhale | |
| 40057 | 56 | 0x38 | Ikhawuntara ye-2 LSR | Funda ubhale | 32-bits counter 2 |
| 40058 | 57 | 0x39 | Ikhawuntara yoku-2 ye-MSR | Funda ubhale | |
| 40059 | 58 | 0x3A | Ikhawuntara ye-3 LSR | Funda ubhale | 32-bits counter 3 |
| 40060 | 59 | 0x3B | Ikhawuntara yoku-3 ye-MSR | Funda ubhale | |
| 40061 | 60 | Ngama-0x3C | Seta kwakhona izixhobo zokubala | Funda ubhale | Phinda umisele i-counter slit bit → ukuseta ngokutsha |
ISIKHOKELO SOKUFAKA
Nceda ufunde imiyalelo phambi kokuba usebenzise okanye usebenzise isixhobo. Kwimeko yayo nayiphi na imibuzo emva kokufunda olu xwebhu, nceda uqhagamshelane neQela leNkxaso le-iSMA CONTROLLI (support@ismacontrolli.com).
- Ngaphambi kocingo okanye ukususa / ukunyuswa kwemveliso, qiniseka ukuba ucima umbane. Ukusilela ukwenza oko kunokubangela ukothuka kombane.
- I-wiring engafanelekanga yemveliso inokuyonakalisa kwaye ikhokelela kwezinye iingozi. Qinisekisa ukuba imveliso ifakwe iintambo ngokuchanekileyo phambi kokuba uvule umbane.
- Sukubamba iindawo ezitshajwa ngombane njengeetheminali zombane. Ukwenza oko kunokubangela ukothuka kombane.
- Musa ukuyichitha imveliso. Ukwenza oko kunokubangela ukothuka kombane okanye ukusebenza kakubi.
- Sebenzisa imveliso kuphela ngaphakathi koluhlu lokusebenza olucetyiswayo kwinkcazo (ubushushu, ukufuma, umthamotage, umothuko, indlela yokunyuka, umoya, njl. njl.). Ukungakwenzi oko kunokubangela umlilo okanye umsebenzi onempazamo.
- Gxininisa ngokuqinileyo iingcingo kwi-terminal. Ukungakwenzi oko kunokubangela umlilo.
- Kuphephe ukufaka imveliso kwindawo ekufutshane nezixhobo zombane ezinamandla aphezulu kunye neentambo, imithwalo yokungenisa, kunye nezixhobo zokutshintsha. Ukusondela kwezinto ezinjalo kunokubangela ukuphazamiseka okungalawulwayo, okukhokelela ekusebenzeni okungazinzanga kwemveliso.
- Ukulungelelaniswa okufanelekileyo kwamandla kunye ne-signal cabling kuchaphazela ukusebenza kwayo yonke inkqubo yokulawula. Kuphephe ukubeka amandla kunye neengcingo zomqondiso kwiitreyi zentambo ezihambelanayo. Inokubangela ukuphazamiseka kwiimpawu ezibekwe esweni kunye nokulawula.
- Kunconywa kubalawuli bamandla / iimodyuli kunye nababoneleli bamandla be-AC / DC. Banikezela nge-insulation engcono kwaye ezinzileyo yezixhobo xa kuthelekiswa neenkqubo ze-AC / AC ze-transformer, ezihambisa ukuphazamiseka kunye neziganeko ezidlulayo ezifana nokunyuka kunye nokuqhuma kwizixhobo. Bakwahlukanisa iimveliso ezivela kwi-inductive phenomena kwezinye ii-transformers kunye nemithwalo.
- Iinkqubo zonikezelo lwamandla kwimveliso kufuneka zikhuselwe zizixhobo zangaphandle ezinciphisa ukugqithiswa kombanetage kunye neziphumo zokukhutshwa kombane.
- Gwema ukunika amandla imveliso kunye nezixhobo ezilawulwayo / ezibekwe esweni, ngakumbi amandla aphezulu kunye nemithwalo ye-inductive, ukusuka kumthombo wamandla omnye. Izixhobo zamandla ezivela kumthombo wamandla omnye zibangela umngcipheko wokwazisa ukuphazamiseka kwimithwalo ukuya kwizixhobo zokulawula.
- Ukuba i-AC / AC i-transformer isetyenziselwa ukubonelela ngezixhobo zokulawula, kucetyiswa ngamandla ukuba kusetyenziswe ubuninzi be-100 VA Class 2 transformer ukuphepha imiphumo engafunekiyo ye-inductive, eyingozi kwizixhobo.
- Imigca emide yokubeka iliso kunye nokulawula inokubangela iilophu malunga nokunikezelwa kwamandla okwabelwana ngawo, okubangela ukuphazamiseka ekusebenzeni kwezixhobo, kubandakanywa unxibelelwano lwangaphandle. Kunconywa ukusebenzisa i-galvanic separators.
- Ukukhusela umqondiso kunye nemigca yonxibelelwano ngokuchasene nokuphazamiseka kwe-electromagnetic yangaphandle, sebenzisa iintambo ezikhuselekileyo eziphantsi kunye namaso e-ferrite.
- Ukutshintshela ukuhanjiswa kwemveliso yedijithali yemithwalo emikhulu (egqithileyo) imithwalo ye-inductive kunokubangela ukuphazamiseka kwe-pulses kumbane ofakwe ngaphakathi kwemveliso. Ngoko ke, kucetyiswa ukuba kusetyenziswe ii-relays zangaphandle / abafowunelwa, njl njl ukutshintsha imithwalo enjalo. Ukusetyenziswa kwabalawuli abaneziphumo ze-triac kwakhona kunciphisa ukugqithisa okufanayotage iziganeko.
- Iimeko ezininzi zokuphazamiseka kunye nokugqithisatagkwiisistim zolawulo ziveliswa ngokutshintshwa, imithwalo ye-inductive enikezelwa ngokutshintshana kwee-mains vol.tage (AC 120/230 V). Ukuba abanazo iisekethe ezifanelekileyo ezakhelwe ngaphakathi zokunciphisa ingxolo, kucetyiswa ukuba kusetyenziswe iisekethe zangaphandle ezifana ne-snubbers, i-varistors, okanye i-diode yokukhusela ukunciphisa ezi ziphumo.
Ukufakwa kombane kule mveliso kufuneka kwenziwe ngokuhambelana neekhowudi zocingo zelizwe kwaye zihambelane nemimiselo yendawo.
Inkonzo eyenzelwe
I-iSMA CONTROLLI SpA
Via Carlo Levi 52, 16010 Sant'Olcese (GE) – Italy
support@ismacontrolli.com
www.ismacontrolli.com
Amaxwebhu / Izibonelelo
 |
iSMACONTROLLI SFAR-S-ETH Modbus TCP-IP ukuya Modbus RTU-ASCII Gateway [pdf] Imiyalelo SFAR-S-ETH Modbus TCP-IP ukuya Modbus RTU-ASCII Gateway, SFAR-S-ETH, Modbus TCP-IP kwi Modbus RTU-ASCII Gateway, Modbus RTU-ASCII Gateway, ASCII Gateway, Gateway |
