Arduino LED Matrix Bonisa
Imiyalelo
Arduino LED Matrix Bonisa
by Giantjovan
Kutshanje ndabona ividiyo ye-Great Scott, apho wenza i-10 × 10 i-matrix ye-LED usebenzisa i-ws2812b RGB LED diodes. Ndagqiba ekubeni ndiyenze. Ke ngoku ndiza kuchaza inyathelo ngenyathelo indlela yokwenza.
Izibonelelo:
- 100 LEDs ws2812b LED Strip, ndenze impazamo apha. Kungcono ukhethe ii-LED ezingama-96 ngemitha, ezifakwe kwi-144LEDs ngemitha.
- Ucingo malunga ne-20m
- Soldering Ucingo
- Ikhadibhodi
- I-Plexiglass
- IArduino (Nano yeyona nto incinci kwaye ingcono kakhulu)
- Ikhadibhodi
- Iinkuni
- Iglu
 |
 |
 |
 |
 |
 |
Inyathelo 1: Inyathelo lokuqala
Yenza izikwere ezincinci kwikhadibhodi. Njengoko ndenzile!
 |
 |
Inyathelo 2: Sika iStrip
Sika umcu...
Inyathelo lesi-3: I-Glue Strip Njengoko ibonisiwe
Inyathelo loku-4:
Inxalenye yokuSoda!
Imicu yesoda njengoko ibonisiwe kumzobo wesekethe.
Ingcebiso: Musa ukuphefumlela umsi otshisayo, kubi kakhulu kwimiphunga. Endaweni yoko yenza ifenithi ezakukhupha umsi. Kwiproleti yam ungayifumana loo projekthi!
Inyathelo lesi-5: Uvavanyo
Okokuqala kufuneka ufakele amathala eencwadi. Vula i-Arduino IDE, Emva koko uye kwi-Sketch, Bandakanya iThala leencwadi, uLawula iilayibrari, Chwetheza i-LED ngokukhawuleza kwibha yokukhangela, kunokucofa ukufaka. Kuya kufuneka kwakhona ufake i-Adafruit NeoPixel.
Ukuvavanya ii-LEDs kuya kufuneka uye kwi-examples, Adafruit NeoPixel elula, kuya kufuneka utshintshe inani le-LED kwikhowudi kunye nenombolo yepin. Cofa ukulayisha! Ukuba zonke izibane ze-LED zilungile ukuba awujongi i-soldering. Ukuba i-soldering ilungile kwaye i-led ayisebenzi, yitshintshe.
Inyathelo loku-6:
Ibhokisi yokwenza
Kufuneka wenze isaphetha kunye nemilinganiselo yakho. Sebenzisa umthi, lolona khetho lungcono. Gqoka umngxuma weArduino, intambo yamandla kunye nokutshintsha.
Inyathelo lesi-7: Igridi
Uya kufuna ukwahlula ii-LED. Unokwenza oku ngokwenza igridi usebenzisa umthi. Le gridi kufuneka igqibelele, akunakubakho naziphi na iimpazamo(ubude obuhlukeneyo, ububanzi...). Ithamsanqa ngokwenza igridi. Eli nyathelo landithatha ixesha lam elininzi. 🙂
Inyathelo loku-8:
Ukugqiba
Igridi yeglue kwii-LEDs kunye neglue ethile. Emva koko faka ezo LEDs kwibhokisi oyenzileyo. Glue Arduino, intambo yamandla kunye nokutshintsha. Sika i-plexiglass ngokobungakanani obufanelekileyo kwaye uyibeke phezu kwebhokisi. Gcoba i-plexiglass ngeglu enkulu. Vavanya ukuba yonke into iyasebenza.
Inyathelo loku-9:
Ukwenza oopopayi
Khuphela kwaye uvule le ziphu file:
https://github.com/TylerTimoJ/LMCS2
Vula ifolda kwaye uye kwi-LED Matrix ifolda yeSeriya, kwaye uvule ikhowudi yeArduino. Guqula inani le-LED kunye nephini kwikhowudi. Layisha ikhowudi kwaye uvale i-Arduino IDE. Vula isoftware yoLawulo lweMatrix ye-LED. Khetha i-COM port kwaye uye kwindlela yokuzoba kwi-engile ephezulu ekhohlo. Ngoku ungazoba. Xa ugqiba ukuzoba yiya kwiKhowudi yeFastLED. Vula ezigciniweyo file kwaye ukope ikhowudi. Kwakhona yiya kwi-LED Matrix isiqulathi seefayili, kwaye uvule ikhowudi yeArduino. Kwicandelo le-loop elingenanto idlulileyo ikhowudi ye-FastLED, kwaye ucime i-void serialEvent () nayo yonke into ekuyo. Layisha ikhowudi kwaye ngoku ungakhupha iArduino kunye nePC. Ulungele ukuhamba ngoku.
Inyathelo 10: Phelisa
Ndineminyaka eli-13 kuphela ubudala kwaye isiNgesi sam ayisosona silungileyo, kodwa ndiyathemba ukuba ndikuncede ngokwenza le projekthi. Nantsi indlela ekhangeleka ngayo eyam. Ndongeze oopopayi aba-2, kodwa unokongeza ezininzi ngakumbi. Uxolo!
https://youtu.be/bHIKcoTS8WQ
Amaxwebhu / Izibonelelo
 |
imiyalelo Arduino LED Matrix Bonisa [pdf] Imiyalelo I-Arduino LED Matrix Display, i-Arduino, i-LED Matrix Display, i-Matrix Display |
