CipherLab 83×0 Series Isikhokelo somsebenzisi

Inguqulelo 1.05
Ushicilelo © 2003 Syntech Information Co., Ltd.

Intshayelelo

I 83×0 Series eziphathwayo Terminals zihexa, ziguquguquka, iitheminali zedatha yokusebenza ephezulu eyilelwe imini yonke, ukusetyenziswa kwemihla ngemihla. Banikwa amandla yi-Li-ion ibhetri etshajwayo eneyure yokusebenza ixesha elide kuneeyure ezili-100. Zixhaswa zizixhobo ezityebileyo zezixhobo zophuhliso, ezibandakanya i-Windows-based generator application, "C" kunye ne "Basic" compilers. Ngeyunithi yabo ehlanganisiweyo yeLaser/CCD yokuskena ibhakhowudi kunye nemodyuli ekhethwayo yeRF, i 83×0 Series eziphathwayo Terminals zilungele zombini ibhetshi kunye nexesha lokwenyani izicelo ezifana nolawulo lwempahla, ulawulo lomgangatho wevenkile, ugcino kunye nemisebenzi yokuhambisa.

PHAWULA: Esi sixhobo sivavanywe kwafunyaniswa ukuba siyangqinelana nemida yesixhobo sedijithali esikuDidi B, ngokweCandelo le-15 leMigaqo yeCCC. Le mida yenzelwe ukubonelela ngokhuseleko olufanelekileyo ekuphazanyisweni xa izixhobo zisebenza kwindawo yorhwebo. Esi sixhobo senza, sisebenzise, ​​kwaye sinokukhupha amandla amaza erediyo kwaye, ukuba asifakwanga kwaye sisetyenzisiwe ngokungqinelana nencwadana yemiyalelo, sinokubangela ukuphazamiseka okuyingozi kunxibelelwano lwerediyo. Ukusebenza kwesi sixhobo kwindawo yokuhlala kunokubangela uphazamiseko oluyingozi apho kuya kufuneka umsebenzisi alungise olo phazamiso ngeendleko zakhe.

Iimpawu eziqhelekileyo kunye neempawu

Iimpawu ezisisiseko ze-83 × 0 Series yeSitena esiphathwayo zidweliswe ngezantsi,

Umbane

• Oibhetri yeperation: I-3.7V Li-ion ibhetri etshajwayo, i-700mAH okanye i-1800mAH (8370 kuphela).
• Gcina ibhetri: I-3.0V, i-7mAH ibhetri yeLithium ehlawulekayo ye-SRAM & ikhalenda
• Ixesha lokusebenza: iiyure ezingaphezu kwe-100 kwi-8300 (imodeli yebhetshi); phezu 20 iiyure 8310 (433MHz RF imodeli), 8 iiyure 8350 (2.4GHz RF imodeli), 36 iiyure 8360 (imodeli Bluetooth) kunye 16 iiyure 8370 (802.11b).

Okusingqongileyo

• Ukufuma okuSebenzayo: ayicondensed 10% ukuya 90%
• Ukufuma kokuGcina: engacondenswanga 5% ukuya 95%
• Ubushushu bokusebenza: -20 ukuya kuma-60 C
• Ubushushu boGcino: -30 ukuya kuma-70 C
• Ummiselo we-EMC: I-FCC, i-CE kunye ne-C-tick
• Sukumelana nehoki: 1.2m yehla phezu kwekhonkrithi
• Ukalo lwe-IP: IP65

Ngokwasemzimbeni

• Imilinganiselo-imodeli yeBatch: 169mm (L) x 77mm (W) x 36mm (H)
• Imilinganiselo-imodeli yeRF: 194mm (L) x 77mm (W) x 44mm (H)
• Ubunzima-imodeli yeBatch: 230g (kubandakanya ibhetri)
• Ubunzima - imodeli yeRF: 250g (kubandakanya ibhetri)
• Umbala wezindlu: Mnyama
• Izinto zendluumthombo: ABS

ICPU

• Toshiba 16-bit CMOS uhlobo CPU
• Iwotshi ye-Tunable, ukuya kuthi ga kwi-22MHz

Inkumbulo

Imemori yenkqubo

• Imemori ye-Bytes ye-1 M isetyenziselwa ukugcina ikhowudi yeprogram, ifonti, idatha eqhubekayo, njalo njalo. Imemori yedatha
• Imodeli yebhetshi (8300): 2M / 4M Iibhayithi SRAM
• Imodeli yeRF (8310/8350/8360/8370): 256K Iibhayithi SRAM

Umfundi

8300 Series Terminal inokuxhotyiswa nokuba Laser okanye Long Range CCD scanner. Kwiimodeli ze-batch (8300C / 8300L), i-angle ye-scan beam ingaba ngqo (0 °) okanye i-45 ° kwindiza ye-LCD. Iinkcukacha ezithe vetshe zezi zilandelayo:

8300L / 8310L / 8350L / 8360L / 8370L (Laser)

• Umthombo wokukhanya: i-Laser diode ebonakalayo esebenza kwi-670±15nm
• Ireyithi yokuskena: 36±3 iskena ngomzuzwana
• Skena i-engile: 42 ° ngegama
• Ubuncinane bokuchasana koshicilelo: I-20% epheleleyo emnyama / ukukhanya okubonakalayo kwi-670nm
• Ubunzulu bebala: 5 ~ 95 cm, kuxhomekeke kwisisombululo sebhakhowudi

8300C / 8310C / 8350C / 8360C / 8370C (CCD)

• Isigqibo: 0.125mm ~ 1.00mm
• Ubunzulu be ibala: 2 ~ 20cm
• Ububanzi bebala: 45mm ~ 124mm
• Ireyithi yokuskena: 100 iskeni/umzuzwana
• Ukwala ukuKhanya okuMaphakathi:
  I-1200 lux (Ukukhanya kweLanga ngqo)
  2500 lux (Isibane seFluorescent)

Bonisa

• 128×64 amachaphaza egraphic FSTN Isibonisi seLCD esinokukhanya kwe-LED ngasemva

Iphedi yezitshixo

• 24 amanani okanye 39 amaqhosha erabha yealphanumeric.

Isalathisi

Buzzer

• Isalathiso sesandi esicwangcisekileyo seSoftware, 1KHz ukuya kwi-4KHz, uhlobo lwetransducer yamandla aphantsi.

I-LED

• I-programmable, i-double-color (eluhlaza kunye nobomvu) i-LED yokubonisa isimo.

Unxibelelwano

• I-RS-232: izinga le-baud ukuya kuthi ga kwi-115200 bps
• Uthotho IR: izinga le-baud ukuya kuthi ga kwi-115200 bps
• I-IrDA eqhelekileyo: izinga le-baud ukuya kuthi ga kwi-115200 bps
• 433MHz RF: izinga ledatha ukuya kuthi ga kwi-9600 bps
• 2.4GHz RF: izinga ledatha ukuya kuthi ga kwi-19200 bps
• Iklasi yeBluetooth 1: izinga ledatha ukuya kuthi ga kwi-433 Kbps
• IEEE-802.11b: izinga ledatha ukuya kuthi ga kwi-11 Mbps

Inkcazo yeRF

433MHz RF (8310)

• Uluhlu lokuphindaphinda: Ngama-433.12 ~ 434.62 MHz
• Uhlengahlengiso: I-FSK (Ukuhamba rhoqo kweShift Keying)
• Ireyithi yedatha: 9600 bps
• Imijelo ecwangcisekileyo: 4
• Ukhuselo: 200M umgca-wokubona
• Ubuninzi Amandla emveliso: 10mW (10dbm)
• Umgangatho: ETSI

2.4GHz RF (8350)

• Uluhlu lokuphindaphinda: 2.4000 ~ 2.4835 GHz, ISM Band engenalayisenisi
• Uhlobo: I-Frequency Hopping Spread Spectrum Transceiver
• Ulawulo lwamaxesha amaninzi: Ngqo FM
• Ireyithi yedatha: 19200 bps
• Imijelo ecwangcisekileyo: 6
• Ukhuselo: 1000M umgca-wokubona
• Ubuninzi bamandla emveliso: 100mW
• Umgangatho: ISM

IBluetooth-Udidi 1 (8360)

• Uluhlu lokuphindaphinda: I-2.4020 ~ 2.4835 GHz
• Uhlengahlengiso: IGFSK
• UProfiles: BNEP, SPP
• Ireyithi yedatha: 433 Kbps
• Ukhuselo: 250M umgca-wokubona
• Ubuninzi bamandla emveliso: 100mW
• Umgangatho: Iimpawu zeBluetooth. V1.1

IEEE-802.11b (8370)

• Uluhlu lokuphindaphinda: I-2.4 ~ 2.5 GHz
• Uhlengahlengiso: I-DSSS ene-DBPSK (1Mbps), i-DQPSK (2Mbps), i-CCK
• Ireyithi yedatha: 11, 5.5, 2, 1 Mbps auto-fallback
• Ukhuselo: 250M umgca-wokubona
• Ubuninzi bamandla emveliso: 100mW
• Umgangatho: IEEE 802.11b & ukuthotyelwa kweWi-Fi

Isiseko seRF - 433MHz (3510)

• Isiseko somamkeli: RS-232
• Inqanaba leBaud elisisiseko: ukuya kuthi ga kwi-115,200 bps
• Isiseko ukuya kwiSiseko: RS-485
• Ubuninzi bezikhululo / Isiseko: 15
• Ezona ndawo ziphezulu / iNkqubo: 45
• Ubuninzi Iziseko / Inkqubo: 16

Isiseko seRF – 2.4GHz (3550)

• Isiseko somamkeli: RS-232
• Inqanaba leBaud elisisiseko: ukuya kuthi ga kwi-115,200 bps
• Isiseko ukuya kwiSiseko: RS-485
• Ubuninzi bezikhululo / isiseko: 99
• Ezona ndawo ziphezulu / iNkqubo: 99
• Ubuninzi Iziseko / Inkqubo: 16

Indawo yoFikelelo yeBluetooth (3560)

• Uluhlu lokuphindaphinda: I-2.4020 ~ 2.4835 GHz
• UProfile: I-BNEP V1.0 NAP
• Ubuninzi bamandla emveliso: 100mW
• Uqhagamshelo lwe-Ethernet: 10/100 Isiseko-T (Ukutshintsha okuzenzekelayo)
• Inkqubo: TC/PIP, UDP/IP, ARP/RARP, DHCP for IPv4
• Ubuninzi bezikhululo / AP: 7 iitheminali (Piconet)
• Umgangatho: Iimpawu zeBluetooth. V1.1

Isoftware

• Inkqubo yokwenza: CipherLab yobunini OS
• Izixhobo zokucwangcisa: Umqambi "C", i-BASIC compiler kunye ne-Windows-based Application Generator

Izincedisi

• Ukutshaja kunye noNxibelelwano imbeleko
• Intambo ye-RS-232
• Keyboard wedge cable
• Iadaptha yamandla
• Ibhetri ye-Li-ion egcwalisekayo
• 3510 / 3550 isikhululo sesiseko seRF
• Indawo yokufikelela yeBluetooth eyi-3560
• 802.11b WLAN Indawo yokuFikelela
• Intambo ye-USB / ibhedi
• Ibhedi yemodem

Uqwalaselo lweNkqubo yeRF

Izazisi kunye namaQela

Isazisi kwi-terminal / isiseko sifana negama emntwini. Itheminali nganye / isiseko kwisixokelelwano esifanayo seRF kufuneka sibe nesazisi esisodwa. Ukuba ii-ID ziphindwe kabini, isistim inokungasebenzi kakuhle. Ke phambi kokuba usebenzise inkqubo yakho yeRF, nceda uqiniseke ukuba yonke i-terminal / base ine-ID eyodwa.

Kwinkqubo ye-RF ye-433MHz, ukuya kuthi ga kwiitheminali ezingama-45 kunye neziseko ezili-16 zinokuxhaswa yinkqubo enye. I-ID esebenzayo isuka kwi-1 ukuya kwi-45 ye-terminals, kunye ne-1 ukuya kwi-16 yeziseko. Ukuxhasa zonke iitheminali ezingama-45, iziseko ze-RF ze-433MHz kufuneka zilungiselelwe ukuba zibe ngamaqela ama-3. Iqela ngalinye kunye nesiseko ngasinye sinokuxhasa ukuya kuthi ga kwiitheminali ezili-15.

• Izazisi ezisisiseko (433MHz): 01 ~ 16
• Izazisi zetheminali (433MHz): 01 ~ 45 (3 amaqela)
  01 ~ 15: exhaswa liQela #1 Iziseko
  16 ~ 30: exhaswa liQela #2 Iziseko
  31 ~ 45: exhaswa liQela #3 Iziseko

Kwinkqubo ye-RF ye-2.4GHz, ukuya kuthi ga kwiitheminali ezingama-99 kunye neziseko ezili-16 zinokuxhaswa yinkqubo enye, kwaye zonke zikwiqela elinye.

• I-ID yesiseko (2.4GHz): 01 ~ 16
• Izazisi zetheminali (2.4GHz): 01 ~ 99

Itheminali yeRF

Iipropati eziqwalaselweyo ze-terminal zezi zilandelayo:

433 MHz imodeli yeRF (8310)

• Isazisi: 01 ~ 45
• Umjelo: 1 ~ 4
• Ixesha lokuphuma: 1 ~ 99 imizuzwana, ixesha lokuzama kwakhona ukuthumela idatha
• Amandla emveliso: 1~5 amanqanaba (10, 5, 4, 0, -5dBm)
• Ukukhangela okuzenzekelayo: 0 ~ 99 sec, khangela ngokuzenzekelayo isitishi esikhoyo xa uqhagamshelo lwetshaneli yangoku lulahlekile

2.4 GHz imodeli yeRF (8350)

• Isazisi: 01 ~ 99
• Umjelo: 1 ~ 6
• Amandla emveliso: ubuninzi 64mW
• Ukukhangela okuzenzekelayo: 0 ~ 99 sec, khangela ngokuzenzekelayo isitishi esikhoyo xa uqhagamshelo lwetshaneli yangoku lulahlekile
• Ixesha lokuphuma: 1 ~ 99 imizuzwana, ixesha lokuzama kwakhona ukuthumela idatha

Iziseko zeRF

Uxhulumaniso oluvela kwikhompyutheni yokusingatha kwisiseko yi-RS-232, ngelixa uxhulumaniso phakathi kweziseko luyi-RS-485. Ukuya kuthi ga kwiziseko ezili-16 kunokudityaniswa kunye kwinkqubo enye yeRF. Ukuba iziseko ezibini okanye ezingaphezulu ziqhagamshelwe kunye, enye iqhagamshelwe kwikhompyuter yenginginya kufuneka imiselwe kwimowudi yomphathi, kwaye ezinye zikwimowudi yamakhoboka.

433 MHz iiPropati eziSiseko (3510)

• Imowudi: 1-ezizimeleyo, 2-ikhoboka, 3-master
• Umjelo: 1 ~ 4
• Isazisi: 01 ~ 16
• Iqela: 1 ~ 3
• Ixesha lokuphuma: 1 ~ 99 imizuzwana, ixesha lokuzama kwakhona ukuthumela idatha
• Amandla emveliso: 1~5 amanqanaba (10, 5, 4, 0, -5dBm)
• Umgangatho weBaud: 115200, 57600, 38400, 19200, 9600

Iipropati eziSiseko ze-2.4 GHz (3550)

• Imowudi: 1-ezizimeleyo, 2-ikhoboka, 3-master
• Umjelo: 1 ~ 6
• Isazisi: 01 ~ 16
• Iqela: 1
• Ixesha lokuphuma: 1 ~ 99 imizuzwana, ixesha lokuzama kwakhona ukuthumela idatha
• Amandla emveliso: ubuninzi 64mW
• Umgangatho weBaud: 115200, 57600, 38400, 19200, 9600

Software Architecture

I-8300 Series Terminal system software iquka iimodyuli ezintathu: imodyuli yekernel & Application Manager, imodyuli yeNkqubo kunye nemodyuli yeSicelo.

I-Kernel kunye noMphathi weSicelo

I-kernel yeyona mbindi yenkqubo. Inokhuseleko oluphezulu kwaye isoloko ikhuselwe yinkqubo. Kuphela kukungaphumeleli kwememori edanyazayo okanye ukucinywa kombane ngokungafanelekanga ngexesha lokuqalisa kwakhona inkqubo emva kohlaziyo lwe-kernel eya kutshatyalaliswa ikernel. Imodyuli yekernel iqinisekisa ukuba abasebenzisi banokuhlala bekhuphela inkqubo yabo yesicelo nokuba inkqubo yokusebenza yatshatyalaliswa yinkqubo yomsebenzisi. I-kernel ibonelela ngezi nkonzo zilandelayo:

• Ulwazi lweKernel
  Ulwazi lubandakanya uguqulelo lwehardware, inombolo yothotho, umhla wokwenziwa, inguqulelo yekernel kunye nolungelelwaniso lwehardware.
• Isicelo sokulayisha
  Ukukhuphela inkqubo yesicelo, i-BASIC ixesha lokuqhuba okanye ifonti files.
• Uhlaziyo lweKernel
  Ngamanye amaxesha i-kernel inokutshintshwa ukuphucula ukusebenza okanye ezinye izizathu. Lo msebenzi ikuvumela ukuba ugcine i-kernel ihlaziyiwe. Inkqubo yohlaziyo iyafana nenkqubo yomsebenzisi yokukhuphela, kodwa qaphela ukuba emva kokuhlaziya i-kernel, nceda ungacimi de isixokelelwano siziqalele kwakhona.
• Vavanya kwaye ulinganise
  Ukwenza uvavanyo lokutshisa kwaye ulungise iwotshi yenkqubo. Lo msebenzi ngowenjongo yokuvelisa kuphela.
  Ngaphandle kwe kernel menu, ukuba akukho nkqubo yesicelo ikhona, ngoko xa unyusela i-terminal le menu yoMphathi weSicelo ilandelayo iyakuboniswa:
• Khuphela
  Ukukhuphela iinkqubo zesicelo (* .SHX), i-BASIC run-time (BC8300.SHX), iinkqubo ze-BASIC (*.SYN) okanye ifonti files (8xxx-XX.SHX) ukuya kwi-terminal. Kukho iindawo ezi-6 zokuhlala kunye neMemori enye eSebenzayo, okt uninzi lweenkqubo ezisi-7 zinokukhutshelwa kwi-terminal. Kodwa kuphela leyo ekhutshelweyo kwiMemori eSebenzayo eya kwenziwa isebenze kwaye isebenze. Ukuqhuba ezinye iinkqubo, kufuneka zivulwe kuqala, kodwa zibe nye kuphela ngexesha. Kanye emva kokukhuphela, ungafaka igama lenkqubo okanye ucinezele nje iqhosha lokungena ukugcina igama layo langoku ukuba likhona. Kwaye ke udidi lwenkqubo ekhutshelweyo, igama kunye nobukhulu ziya kuboniswa kuluhlu xa ungenisa Khuphela okanye Vula imenyu yoMphathi weSicelo. I file uhlobo lunobumba omncinci lulandela inombolo yenkqubo (01~06), inokuba 'b', 'c' okanye 'f' emele inkqubo yeBASIC, inkqubo yeC okanye ifonti. file ngokulandelelanayo. Igama lenkqubo lifikelela kwi-12 labasebenzi kwaye ubungakanani benkqubo bukwiyunithi ye K bytes.
• Vula
  Ukukopa enye yeenkqubo ezi-6 zokuhlala kwiMemori eSebenzayo ukuyenza ibe yinkqubo esebenzayo. Emva kokwenza isebenze, inkqubo yoqobo kwiMemori eSebenzayo iya kutshintshwa entsha. Qaphela ifonti file ayinakwenziwa isebenze, kwaye inkqubo ye-BASIC ayinako ukuvuselelwa nokuba ngaba ixesha lokuqhuba le-BASIC alikho.
• Layisha
  Ukuhambisa iinkqubo zesicelo kwi-PC yomkhosi okanye enye i-terminal. Umsebenzi uvumela i-terminal ukuba yenziwe ngaphandle kokudlula kwiPC.

Inkqubo

Imodyuli yesistim ibonelela ngezi nkonzo zilandelayo:

1. Ulwazi

Ulwazi lwenkqubo lubandakanya inguqulo ye-hardware, inombolo ye-serial, umhla wokuvelisa, inguqulo ye-kernel, ilayibrari ye-C okanye i-BASIC inguqulo ye-run-time version, inguqulo yeprogram yesicelo kunye nokucwangciswa kwe-hardware.

2. Iisetingi

Iisetingi zesistim ziquka oku kulandelayo:

Ikloko

Seta umhla kunye nexesha lenkqubo.

Isibane ngasemva ngeXesha

Cwangcisa ixesha lokuhlala kwikhibhodi kunye ne-LCD backlight.
Ukuhlala kukho: izibane ziyacima emva kwemizuzwana engama-20.

Isantya seCPU

Cwangcisa isantya sokusebenza se-CPU. Kukho izantya ezintlanu ezifumanekayo: Isantya esipheleleyo, isantya sesiqingatha, isantya sekota, isantya sesibhozo kunye nesantya seshumi elinesithandathu. Ukuhlala kukho: Isantya esipheleleyo

Vala ngokuzenzekelayo

Misela umda wexesha lokucima ngokuzenzekelayo xa kungekho msebenzi uqhubekayo ngelo xesha lichaziweyo. Ukuba eli xabiso limiselwe ku-zero, lo msebenzi uza kucishwa. Ukuhlala kukho: imizuzu eyi-10

Amandla On Iinketho

Kukho ukhetho olunokwenzeka: INkqubo yokuQalisa, eqala kwinkqubo esetyenziswa ngexesha leseshoni yokugqibela phambi kokucima kokuphela kombane; kunye neNkqubo yokuQalisa kwakhona, eqala ngenkqubo entsha.
Ukuhlala kukho: Qalisa ngeNkqubo

Cofa iqhosha

Khetha ithowuni ye-beeper okanye ukhubaze i-beeper xa umsebenzisi ecofa iqhosha lesitshixo. Ukuhlala kukho: Vulela

Igama Lokugqithisa

Cwangcisa igama lokugqithisa ukukhusela umsebenzisi ekungeneni kwimenyu yenkqubo. Ukuhlala kukho: akukho gama liyimfihlo libekiweyo

3. Iimvavanyo

Umfundi

Ukuvavanya ukusebenza kokufunda kweskena. Ezi khowudi zebhakhowudi zilandelayo azigqibekanga ukwenza:

Ikhowudi 39
Umzi-mveliso 25
Ikhefu le-25
Codabar
Ikhowudi 93
Ikhowudi 128
UPCE
UPCE nge-ADDON 2
UPCE nge-ADDON 5
I-EAN8
I-EAN8 ene-ADDON 2
I-EAN8 ene-ADDON 5
I-EAN13
I-EAN13 ene-ADDON 2
I-EAN13 ene-ADDON 5
Ezinye iibhakhowudi mazivulwe ngohlelo.

Buzzer

Ukuvavanya i-buzzer ngeFrequency/Ubude obahlukileyo. Cinezela NGENA iqhosha ukuqalisa kwaye ucinezele naliphi na iqhosha ukumisa uvavanyo.

I-LCD kunye ne-LED

Ukuvavanya umboniso we-LCD kunye nesalathisi se-LED. Cinezela NGENA iqhosha ukuqalisa kwaye ucinezele naliphi na iqhosha ukumisa uvavanyo.

Ikhibhodi

Ukuvavanya izitshixo zerabha. Cinezela iqhosha kwaye umphumo uya kuboniswa kwi-LCD display. Qaphela ukuba iqhosha le-FN kufuneka lisetyenziswe kunye namaqhosha amanani.

Inkumbulo

Ukuvavanya imemori yedatha (SRAM). Qaphela emva kovavanyo, imixholo yendawo yememori iya kucinywa.

4. Inkumbulo

Ulwazi ngobungakanani

Ulwazi lubandakanya ubungakanani bememori yesiseko (SRAM), imemori khadi (SRAM) kunye nememori yeprogram (FLASH) kwiyunithi yeekhilobhayithi.

Qalisa

Ukuqalisa imemori yedatha (SRAM). Qaphela imixholo yesithuba sedatha iya kucinywa emva kokuqaliswa kwememori.

5. Amandla

Bonisa umqulutages yebhetri engundoqo kunye nebhetri elilalela.

6. Isicelo somthwalo

Ukukhuphela inkqubo yesicelo, i-BASIC ixesha lokuqhuba okanye ifonti file. Kukho ujongano oluthathu oluxhaswa yinkqubo, ezizezi, i-Direct-RS232, Cradle-IR kunye ne-IrDA eqhelekileyo.

7. 433M Imenyu (8310)

Le nto iya kuboniswa kuphela ukuba imodyuli ye-433MHz RF ifakiwe. Kukho iimenyu ezimbini ukuba le nto ikhethiwe:

Iisetingi

Izicwangciso zeRF kunye namaxabiso azo angagqibekanga ami ngolu hlobo lulandelayo,
Isazisi setheminali: 01
Ijelo letheminali: 01
Amandla etheminali: 01
Ixesha lokukhangela ngokuzenzekela: 10
Thumela ixesha lokuvala: 02

Iimvavanyo

Uvavanyo lweRF lubandakanya oku kulandelayo,

1. Thumela Uvavanyo
2. Fumana uvavanyo
3. Uvavanyo lwe-Echo
4. Uvavanyo lweChannel

7. 2.4G Imenyu (8350)

Le nto iya kuboniswa kuphela ukuba imodyuli ye-2.4GHz RF ifakiwe. Kukho iimenyu ezimbini ukuba le nto ikhethiwe:

Iisetingi

Izicwangciso zeRF kunye namaxabiso azo angagqibekanga ami ngolu hlobo lulandelayo,
Isazisi setheminali: 01
Ijelo letheminali: 01
Amandla etheminali: 01
Ixesha lokukhangela ngokuzenzekela: 10
Thumela ixesha lokuvala: 02

Iimvavanyo

Uvavanyo lweRF lubandakanya oku kulandelayo,

1. Thumela Uvavanyo
2. Fumana uvavanyo
3. Uvavanyo lwe-Echo
4. Uvavanyo lweChannel

7.Bluetooth Imenyu (8360)

Le nto iya kuboniswa kuphela ukuba imodyuli yeBluetooth ifakiwe. Imenyu yeBluetooth ibandakanya ezi zinto zilandelayo:

1. Ulwazi
2. Ukumiselwa kwe-IP
3. Ukubeka i-BNEP
4. Ukhuseleko
5. Iimvavanyo ze-Echo
6. Ukubuza

7.802.11b Imenyu (8370)

Le nto iya kuboniswa kuphela ukuba imodyuli ye-802.11b ifakiwe. Imenyu ye-802.11b ibandakanya ezi zinto zilandelayo:

1. Ulwazi
2. Ukumiselwa kwe-IP
3. WLAN Useto
4. Ukhuseleko
5. Iimvavanyo ze-Echo

Isicelo

Imodyuli yeSicelo ibaleka phezu kweNkqubo yomodyuli. Iitheminali eziphathwayo ze-83×0 zilayishwa kwangaphambili kunye nenkqubo yexesha lokuqhuba ye-Application Generator kwaye le menu ilandelayo iya kuboniswa xa kunikwa amandla iyunithi phezulu:

Imodeli yebhetshi (8300):

1. Qokelela idatha
2. Ngenisa idatha
3. Izinto eziluncedo

Iimodeli zeRF (8310 / 8350 / 8360 / 8370)

1. Thatha idatha
2. Izinto eziluncedo

Izitshixo zotolo zingasetyenziswa ukukhetha umba wemenyu, kwaye uyiphumeze ngokucinezela iqhosha le-ENTER.
Qaphela ukuba usebenzisa i-Application Generator ukwenza inkqubo yesicelo sakho, kufuneka uyikhuphele kwi-terminal. Kwaye kwiimodeli zeRF, kufuneka usebenzise i-RF Database Manager ukusingatha idatha engenayo naphumayo ukuya nokuphuma kwiPC. Ngolwazi oluthe kratya, nceda ujonge “kwiSikhokelo soMsebenzisi seSicelo se-8300 seSicelo seGenereyitha” kunye “neSikhokelo soMsebenzisi weSicelo seRF ye-Generator”.

Ukucwangcisa i-terminal

Kukho izixhobo ezintathu zesoftware ezikhoyo zokuphuhlisa iinkqubo zesicelo kwi-terminal.

1. Umvelisi weSicelo
2. UMqulunqi "BASIC".
3. Umqokeleli "C"

Ngolwazi oluneenkcukacha, nceda uqhagamshelane ne-Syntech Information Co., Ltd.

Ukucwangcisa inkqubo yonxibelelwano

Indawo yonxibelelwano ye-8300 Portable Data Terminal ixhasa i-serial interface ye-IR kuphela. Phambi kokuba usetyenziso lwePC yakho luqale ukunxibelelana ne-terminal nge-cradle yayo, kuqala kufuneka uqwalasele i-cradle ngokusebenzisa inkqubo. Kukho i-DLL ekhoyo kule njongo. Ngolwazi oluthe vetshe, nceda uqhagamshelane ne-Syntech Information Co., Ltd.

Imisebenzi

Iibhetri kufuneka zibe ntsha kwaye zilayishwe ngokufanelekileyo phambi kokuba kuqaliswe ukusebenza.

Imisebenzi yekhiphedi

Iiterminals ze-8300 Series zineendlela ezimbini zebhodibhodi: izitshixo zerabha ezingama-24 kunye nezitshixo zerabha ezingama-39. Imisebenzi yezinye izitshixo ezikhethekileyo yile ilandelayo:

SKENA
Skena ibhakhowudi.
Cinezela eli qhosha lizakuqalisa iskena ukuba sifunde ikhowudi yebhakhowudi ukuba izibuko lokuskena lenziwe lasebenza.

NGENA
Ngena.
Kukho izitshixo ezimbini zokungena kwicala leqhosha lokuskena. Ngokuqhelekileyo izitshixo zokungena zisetyenziselwa ukwenziwa komyalelo okanye ukuqinisekiswa kongeniso.

I-ESC
Baleka.
Ngesiqhelo eli qhosha lisetyenziselwa ukumisa kunye nokuphuma ekusebenzeni kwangoku.

BS
Emva Isithuba.
Ukuba eli qhosha licinezelwa phantsi ixesha elide kunomzuzwana omnye, ikhowudi ecacileyo iya kuthunyelwa.

ALPHA /   
Iqhosha lokuguqula leAlfabhethi / igalelo leNani.
Xa inkqubo ikwimo ye-alpha, i-ayikhoni encinci iya kuboniswa kumboniso. Kwibhodi yezitshixo ezingama-24, iqhosha lenombolo nganye linokusetyenziswa ukwenza omnye woonobumba abathathu abakhulu. UmzekeloampI-le, inombolo yesi-2 ingasetyenziselwa ukuvelisa u-A, B okanye u-C. Ukucofa iqhosha elifanayo kabini kwisekhondi enye, kuyakubiza unobumba B. Ukucofa iqhosha elifanayo ngaphandle kokumisa ixesha elide kunomzuzwana omnye, kuya kubangela ukuba oonobumba abathathu baboniswe indlela ejikelezayo. Kuphela xa uyeka ukucofa isitshixo ixesha elide kunomzuzwana omnye okanye ucofa elinye iqhosha, inkqubo iya kuthumela ikhowudi yokwenene yesitshixo kwinkqubo yesicelo.

FN
Iqhosha lomsebenzi.
Eli qhosha alinakuvulwa lilodwa, kufuneka licinezelwe ngeqhosha lenani elinye
kwangelo xesha. Umzekeloample, FN + 1 ivelisa umsebenzi #1, FN + 2 ivelisa umsebenzi #2, njl (ukuya kwi-9 imisebenzi). Kwakhona, eli qhosha linokudityaniswa ne-UP/PHANSI iqhosha lokunyenyisa umahluko we-LCD. Kwaye xa eli qhosha lidityanisiwe kunye neqhosha le-ENTER, liya kuvula / CIMA isibane sangasemva.

AMANDLA
Cima / Cima.
Ukuthintela ukutyhala okungalunganga, kufuna malunga ne-1.5 sec ngokucofa ngokucokisekileyo ukuLayisha/Vala amandla.

.23. Imo yesicelo

Le yindlela yokusebenza engagqibekanga xa ulayita amandla. Umsebenzi uxhomekeke kwimodyuli yesicelo. Nceda ujonge kwicandelo 4.4.

Imo yenkqubo

Ukungena kwimenyu yesixokelelwano, kufuneka ucofe i 7, 9 kwaye AMANDLA izitshixo ngaxeshanye phezu kokunyusa i-terminal. Ngeenkcukacha zeenkonzo ezibonelelwa yinkqubo, nceda ujonge kwicandelo 4.2.

Imowudi yeKernel

Ukungena kwimenyu ye-kernel, kufuneka ucofe 7, 9 kwaye AMANDLA amaqhosha ngaxeshanye ukungena kwimenyu yesixokelelwano kuqala, emva koko cima iyunithi kwaye ucinezele 1, 7 kwaye AMANDLA isitshixo ngaxeshanye. Okanye ukuba ibhetri isandula ukulayishwa kwakhona, ngoko cofa 1, 7 kwaye AMANDLA isitshixo ngaxeshanye siya ngqo kwi kernel. Ngeenkcukacha zeenkonzo ezibonelelwa yikernel, nceda ujonge kwicandelo 4.1.

Umphathi weSicelo

Nangona uMphathi weSicelo eyinxalenye yekernel, ukuyifaka, kufuneka ucinezele '8' kwaye AMANDLA isitshixo ngaxeshanye. Okanye ukuba inkqubo yesicelo ayikho, iyunithi iya kuya ngokuzenzekela kwimenyu yoMphathi weSicelo xa uvula amandla.

Ezi nkonzo zintathu: Khuphela, uvule kwaye uFayishe ezibonelelwa nguMphathi weSicelo zichazwe kwiCandelo 4.1. Kodwa kuthekani ukuba ufuna ukuhlaziya inkqubo okanye ukuyicima? Kuzo zombini iimeko, kufuneka ukhethe imenyu yokukhuphela kwaye ukhethe inkqubo eza kuhlaziywa okanye icinywe. Umphathi weSicelo emva koko ubonisa ulwazi lwenkqubo ekhethiweyo njengeGama leNkqubo, Ixesha lokuKhuphela, eSebenzisiweyo kunye nememori yeFlash yasimahla. Kwaye ke nceda ufake 'C' ukuhlaziya inkqubo ekhethiweyo, okanye igalelo 'D' ukuyicima.

Ukulungisa ingxaki

a) Ayinamandla emva kokucofa iqhosha elithi POWER.

• Qinisekisa ukuba ibhetri ilayishiwe.
  Ukutshaja ibhetri kwaye ujonge nemo yokutshaja. Ukuba akukho lwazi lokutshaja olubonakalisiweyo kwidispleyi, layisha kwakhona ibhetri kwaye ujonge ukuba ibhetri ifakwe kakuhle na uze uzame kwakhona.
• Fowunela inkonzo ukuba ingxaki iyaqhubeka.

b) Ayinakho ukuthumela idatha okanye iinkqubo ngezibuko lonxibelelwano lwetheminali.

• Jonga ukuba intambo iplagwe ngokuqinileyo, ngoko,
• Khangela ukuba iiparamitha zonxibelelwano lwenginginya (izibuko leCOM, izinga lebhaud, amasuntswana edatha, ukulingana, ukumisa kancinci) ziyahambelana neTheminali.

c) Iphedi yezitshixo ayisebenzi kakuhle,

• Cima amandla emva koko ucinezele i-7, 9 kunye namaqhosha AMANDLA ngaxeshanye ukungena kwimenyu yenkqubo.
• Ukusuka kwimenyu yesistim, khetha Uvavanyo kwaye emva koko i-KBD yayo esezantsi.
• Yenza uvavanyo lokungena.
• Ukuba ingxaki iyaqhubeka, fowunela inkonzo.

d) Iskena asiskena,

• Khangela ukuba iibarcodes ezisetyenzisiweyo zenziwe zasebenza, okanye
• Jonga ukuba isalathisi esisezantsi kwebhetri sibonisiwe na kwisibonisi se-LCD. Ukuba ewe, tshaja ibhetri.
• Ukuba ingxaki iyaqhubeka, fowunela inkonzo.

e) Iimpendulo ezingaqhelekanga,

• Vula ikepusi yebhetri kwaye ulayishe kwakhona ibhetri.
• Ngenisa inkqubo yemenyu ngokucofa u-7, 9 kunye namaqhosha AMANDLA ngaxeshanye.
• Khangela ukuba i-terminal ingaba nempendulo echanekileyo ngokwenza iimvavanyo.
• Ukuba ingxaki iyaqhubeka, fowunela inkonzo.

SYNTECH ULWAZI CO., LTD.

UNdlunkulu: 8F, No.210, Ta-Tung Rd., Sec.3, Hsi-Chih, Taipei Hsien, Taiwan
Tel: +886-2-8647-1166 Fax: +886-2-8647-1100
i-imeyile: support@cipherlab.com.tw http://www.cipherlab.com.tw

 

CipherLab 83×0 Series Isikhokelo somsebenzisi – Khuphela [kulungisiwe]
CipherLab 83×0 Series Isikhokelo somsebenzisi – Khuphela

Iimbekiselo

• Incwadi yokusebenzisa