I-BN-LINK U110 8 iqhosha lokuBala kwiSibali-xesha eDongeni Tshintsha kunye neNcwadi yoMyalelo woMsebenzi oPhindayo

IIMVELISO VIEW

1. IQhosha Lenkqubo Yokubala: Cofa ukuqalisa inkqubo yokubala.
2. IQhosha LOKUVULA/VUMA: Vula/Vala ngesandla okanye ubhale ngaphezulu inkqubo eqhubayo.
3. 24-Hr Phinda Iqhosha: Vula okanye uvale ukuphindwa kwenkqubo yemihla ngemihla.

Kukho amaqhosha asi-8 kwiqela lenjongo engundoqo: amaqhosha a-6 okubalela phantsi, LAYITA ICIMA iqhosha kunye PHINDA iqhosha. Uqwalaselo lwamaqhosha okubala luyohluka kwiimodeli ezisezantsi ezahlukeneyo:
U110a-1: 5Min, 10Min, 20Min, 30Min, 45Min, 60Min
U110b-1: 5Min, 15Min, 30Min, 1Iyure, 2Iyure, 4Iyure

INGCACISO YOBUGCISA

125V-,60Hz
15A/1875W Resistive, 10A/1250W Tungsten, 10A/1250W Ballast, 1/2HP, TV-5
Ubushushu bokusebenza: 5°F -122°F (-15 °C-50°C)
Ubushushu bokugcina: -4°F-140°F (-20°C-60°C)
Iklasi ye-Insulation: II
Iklasi yoKhuselo: IP20
Ukuchaneka kwewotshi: ± imizuzu emi-2/ngenyanga

IMIYALELO YOKHUSELEKO

• Ipali enye: Ixesha liya kulawula izixhobo kwindawo enye. Musa ukusebenzisa kwi-3-Ndlela yesicelo apho iiswitshi ezininzi zilawula isixhobo esifanayo.
• ucingo oluphakathi: Olu lucingo ekufuneka lubekhona njengenxalenye yocingo lwesakhiwo. Isibali-xesha asiyi kusebenza ngokufanelekileyo ukuba ucingo olungathathi hlangothi alukho kwibhokisi yodonga.
• Ucingo oluNgqo: Esi sibali-xesha senzelwe kuphela ukufakwa ngokusisigxina kwibhokisi yodonga lombane.
• Ukunqanda umlilo, ukothuka, okanye ukufa, cima umbane kwi-breaker circuit okanye ibhokisi ye-fuse phambi kocingo.
• Ufakelo ngumbane onelayisenisi kwiikhowudi zasekhaya, zikarhulumente kunye nezesizwe kuyacetyiswa.
• Ukusetyenziswa ngaphakathi kuphela.
• Musa ukudlula iireyithingi zombane.

UKUFAKWA

1. Cima umbane kwi-breaker circuit okanye kwibhokisi ye-fuse phambi kokuba ukhuphe isixhobo esikhoyo okanye ufakele isibali-xesha esitsha.
2. Susa ipleyiti yodonga ekhoyo kwaye utshintshe kwibhokisi yodonga.
3. Qinisekisa ukuba ezi ngcingo zi-3 zilandelayo zikhona kwibhokisi yodonga.
   a. 1 Ucingo olushushu olusuka kwibhokisi ye-circuit breaker
   b. 1 Layisha ucingo kwisixhobo esiza kuqhutywa
   c. 1 ucingo oluphakathi Ukuba azikho, esi sixhobo seXesha asiyi kusebenza kakuhle. Iingcingo ezongezelelweyo kwibhokisi yodonga ziya kufuneka ngaphambi kokuba ukufakwa kwesi sibali-xesha kugqitywe.
4. Iingcingo zokuqhawula 1/2-intshi ubude.
5. Sebenzisa amandongomane ocingo olubandakanyiweyo kwaye ujije ngokukhuselekileyo kunye ukuze uncamathisele iingcingo zexesha kwiingcingo zesakhiwo.
   Iintambo:
   
   
6. Faka isibali-xesha kwibhokisi yodonga ulumke ungaculi naziphi na iingcingo. Qiniseka ukuba isibali-xesha silungile.
7. Qinisa isibali-xesha kwibhokisi yodonga usebenzisa izikrufu ezinikiweyo.
8. Beka ipleyiti eludongeni yokuhombisa ebandakanyiweyo malunga nobuso besibali-xesha.
9. Buyisela amandla kwi-breaker circuit okanye kwibhokisi ye-fuse.

IMIYALELO YOKUSEBENZA

1. Ukuqaliswa:
   Xa i-timer iqala ukusebenza, zonke izikhombisi ziya kukhanyisa kwaye ziphume emva kwenkqubo yokuzixilonga. Akukho mveliso yamandla kule stage.
2. Ukuseta inkqubo yokubala ukwehla:
   Cofa nje iqhosha elimele inkqubo yokubala efunekayo, isalathisi kwiqhosha liyakhanyisa kwaye ukubala kuyaqala. Isibali-xesha siyakukhupha amandla kwaye emva koko siwunqumle xa inkqubo yokubala phantsi iphela. Ukucofa ngokuphinda-phindeneyo iqhosha elifanayo phambi kokuba isibali esibuyela emva siphele akusayi kuphinda kuqalise ukubala.
   Example: Iqhosha lemizuzu engama-30 licofa ngo-12:00, ukucofa eli qhosha phambi ko-12:30 akusayi kuphinda kuqalise inkqubo yokubala ukwehla.
   
3. Ukutshintshela kwenye inkqubo yokubala
   Ukutshintshela kwenye inkqubo yokubala, cofa nje iqhosha elihambelanayo. Isalathisi kwiqhosha langaphambili liya kuphuma kwaye isalathisi kwiqhosha elitsha elicofayo likhanyisa. Inkqubo entsha yokubala iqala.
   Example: Cinezela iqhosha leyure enye ngelixa inkqubo yemizuzu engama-1 sele iqhuba. Isalathisi kwiqhosha lemizuzu engama-30 liya kuphuma kwaye isalathisi kwiqhosha leyure eli-30 likhanyisa. Isibali-xesha siya kukhupha amandla ngeyure enye. Imveliso yamandla ayiyi kunqunyulwa ngexesha lokutshintsha.
4. Ukuvuselela umsebenzi wokuphinda wemihla ngemihla
   Cinezela iqhosha elithi REPEAT xa inkqubo yokubala ezantsi isebenza, isalathisi esikwiqhosha le-REPEAT sikhanyisa, ebonisa ukuba umsebenzi wokuphinda wemihla ngemihla uyasebenza ngoku. Inkqubo yangoku iya kuqhuba kanye kwakhona ngexesha elinye kusuku olulandelayo.
   
   Example: Ukuba iprogram yemizuzu engama-30 isetwe ngo-12:00 lize iqhosha elithi REPEAT licinezelwe ngo-12:05, iprogram yokubala ukwehla ngemizuzu engama-30 iya kuqhuba yonke imihla ngo-12:05 ukususela kusuku olulandelayo ukuya phambili.
5. Ukuvalwa komsebenzi wokuphinda wemihla ngemihla
   Landela nakweyiphi na indlela engezantsi ukucima umsebenzi wokuphinda wemihla ngemihla. a. Cofa iqhosha le-REPEAT, isalathisi kwiqhosha liya kuphuma. Oku akuyi kuchaphazela inkqubo eqhubekayo. b. Cinezela ON/OFF iqhosha ukuphelisa inkqubo eqhubekayo kunye nomsebenzi wokuphinda wemihla ngemihla.
   Phawula: Xa inkqubo yokubala phantsi iqhutywa nomsebenzi wokuphinda wemihla ngemihla, cofa elinye iqhosha lenkqubo yokubala liza kuqalisa inkqubo entsha yokubala kwaye livale umsebenzi wokuphinda wemihla ngemihla.
6. Ukupheliswa kwenkqubo yokubala.
   Inkqubo yokubala ubuyela umva iphelelwa kwezi meko zi-2 zilandelayo:
   
   a. Xa inkqubo yokubala igqiba, isalathisi siyaphuma kwaye imveliso yamandla iyanqunyulwa
   b. Cinezela ON/OFF iqhosha nangaliphi na ixesha ukuphelisa inkqubo yokubala. Lo msebenzi ukwavala umsebenzi wokuphinda wemihla ngemihla.
7. Ngalo lonke ixesha
   Ukuba ubalo-phantsi sele lubaleka okanye umsebenzi wophinda-phinda wemihla ngemihla uyasebenza, cinezela ON/VALIWE kabini ukuseta isibali-xesha UKUTHI LUVILEYO. Ukuba isibali-xesha sikwimowudi VALIWE, cofa IVULA/VALIWE kube kanye.
   Qaphela: Kwimo ehlala ivuliwe, isalathisi kwi-ON / OFF iqhosha likhanyisa kwaye imveliso yamandla isigxina.
8. Ukuphelisa RHOQO. a. Cinezela ON/OFF iqhosha. Isalathisi se-ON / OFF siphuma kwaye imveliso yamandla iyanqunyulwa, okanye, b. Cinezela iqhosha lenkqubo yokubala.
9. Iqalisa kwakhona inkqubo yokubala ukwehla
   a. Cinezela ON/OFF ukuphelisa inkqubo kwaye emva koko ucinezele iqhosha lokubala, okanye
   b. Cofa elinye iqhosha lokubala kwaye emva koko iqhosha lokubala elidlulileyo, okanye
   c. Vula umsebenzi wophinda wemihla ngemihla (ukuba sele usebenza, nceda uvale kuqala) kwaye inkqubo yangoku yokubala izakuphinda iqale. Ukuba umsebenzi wokuphinda wemihla ngemihla awufuneki, nceda ucinezele PHINDA iqhosha kwakhona.

UKULUNGISA INGXAKI

Xa imveliso inikwe amandla, nceda ujonge ukuba onke amaqhosha kunye nezikhombisi zisebenza ngokufanelekileyo. Nceda qaphela ukuba isalathisi sokuPHINDA sikhanyisa kuphela xa inkqubo yokubala ukwehla iyasebenza.

• INGXAKI: Akukho qhosha liphendulayo xa licofa. 0 ISISOMBULULO:
  1. Khangela ukuba imveliso ifumana amandla.
  2. Khangela ukuba i-wiring ichanekile.
• INGXAKI: Umsebenzi wokuphinda weyure ezingama-24 awusebenzi. 0 ISISOMBULULO:
  1. Nceda ujonge ukuba isalathisi sokuPHINDA sivuliwe. Lo msebenzi usebenza kuphela xa isalathisi sivuliwe.

BN-LINK INC.
12991 Leffingwell Avenue, Santa Fe Springs Uncedo lweNkonzo yabaThengi: 1.909.592.1881
I-imeyile: support@bn-link.com
http://www.bn-link.com
Iiyure: 9AM - 5PM PST, Mon - Fri

Amaxwebhu / Izibonelelo

I-BN-LINK U110 8 Iqhosha Lokubala kwiSibali-xesha eDongeni Tshintsha kunye nomsebenzi oPhindayo [pdf] Incwadi Yomyalelo U110, 8 iQhosha lokubala kwiSibali-xesha eDongeni Tshintsha kunye noMsebenzi oPhindayo, U110 8 iQhosha eliBuyiselwa phantsi eDongeni isibali-xesha Thwitha ngomsebenzi oPhindayo

Iimbekiselo

• Incwadi yokusebenzisa