B IMITHA ISMA-B-MIX18 Mix Igalelo kunye neModyuli yokuPhuma

IiNkcazo zeMveliso

• Ubonelelo lwamandla: Amagalelo ajikelezileyo
• Amagalelo edijithali: 5x voltage, umlinganiselo wangoku kunye nokumelana, ukudibanisa okomileyo
• Iziphumo ze-Analog: I-4x 0-10 V imveliso ye-DC, umthwalo ophezulu ukuya kwi-20 mA ngetshaneli nganye
• Iziphumo zedijithali: i-4x ye-relay output
• Interface: RS485 isiqingatha duplex, Modbus okanye BACnet
• I-Baudrate: Misela ngokutshintsha kuluhlu ukusuka kwi-2400 ukuya kwi-115200 bps
• Umlinganiselo wokhuseleko lokungena: IP40 - yofakelo lwangaphakathi
• Iqondo lobushushu: 5 ukuya 95% RH (ngaphandle kokujiya)
• Connectors: RS485 BIASING RESISTORS, TERMINALS OF THE DEVICE
• Ubungakanani: 88x110x62 mm (3.46×4.33×2.44 ngaphakathi)
• Ukunyuswa: Ukunyuswa kukaloliwe weDIN (DIN EN 50022 eqhelekileyo)
• Izinto zezindlu: Iplastiki, iPC/ABS ezicimayo

Imiyalelo yokusetyenziswa kwemveliso

Izikhokelo zoFakelo

Nceda ufunde imiyalelo phambi kokuba usebenzise okanye usebenzise isixhobo. Kwimeko yayo nayiphi na imibuzo emva kokufunda olu xwebhu, nceda uqhagamshelane neQela leNkxaso le-iSMA CONTROLLI (support@ismacontrolli.com).
Ukufakwa kombane kule mveliso kufuneka kwenziwe ngeekhowudi zocingo zelizwe kwaye zihambelane nemimiselo yendawo.

Ukuqwalaselwa koBonelelo lwaMandla
Qinisekisa ukuba unikezelo lombane luhlangabezana nemigaqo efunekayo ukuze isixhobo sisebenze ngokuchanekileyo.

Imiyalelo yoQhagamshelwano
Landela udibaniso olunelebhile lwevoltage, okwangoku, ukuxhathisa, amagalelo edijithali, iziphumo ze-analog, kunye neziphumo zedijithali.

Ukusekwa koNxibelelwano
Qwalasela idilesi yojongano kunye ne-baudrate ngokweemfuno zakho. Qinisekisa ukupheliswa okufanelekileyo kwibhasi ye-RS485.

Imiyalelo yokunyuka
Nyusa isixhobo kumzila kaloliwe weDIN ngokulandela i-DIN EN 50022 eqhelekileyo yofakelo olukhuselekileyo.

Iingqwalasela zoBubushushu kunye nokufuma
Gcina ubushushu bokusebenza kunye nokufuma okuhambelanayo ngaphakathi koluhlu oluchaziweyo ukuze usebenze kakuhle.

Isondlo
Jonga rhoqo kwaye ucoce izihlanganisi ukuqinisekisa ukusebenza okufanelekileyo.

Imibuzo Ebuzwa Rhoqo (FAQ)

• Umbuzo: Ndingenza ntoni xa ndidibana nemiba yobonelelo lombane?
  A: Jonga igalelo lamandla kwaye uqinisekise ukuba liyahlangabezana neenkcukacha ezifunekayo. Qhagamshelana nenkxaso yabathengi ukuba iingxaki ziyaqhubeka.
• Umbuzo: Ndilucwangcisa njani useto lonxibelelwano?
  A: Sebenzisa iiswitshi ezinikezelweyo ukuseta idilesi yojongano kunye ne-baudrate ngaphakathi koluhlu oluchaziweyo.
• Umbuzo: Ndingasifaka isixhobo ngaphandle?
  A: Hayi, isixhobo silinganiselwe ukufakelwa kwangaphakathi kuphela (IP40).

INGCACISO

Ukunikezwa Amandla	DC: 24 V ± 20%, 3 W; AC: 24 V ± 20%, 4.5 VA
Igalelo jikelele	5x umthamotage, umlinganiselo wangoku kunye nokumelana, ukudibanisa okomileyo
Amagalelo edijithali	I-5x igalelo lokudibanisa elomileyo, i-high-speed pulse counter ukuya kwi-100 Hz
Iziphumo zeAnalog	I-4x 0-10 V imveliso ye-DC, umthwalo ophezulu ukuya kuthi ga kwi-20 mA ngetshaneli nganye, 60 mA ubuninzi bomthwalo opheleleyo weziphumo ze-analog
Iziphumo zedijithali	4x relay imveliso	Ubuninzi bokulinganisa	UL iyahambelana amanqaku
	Umthwalo oxhathisayo ubuninzi.	3 A @ 230 V AC 3 A @ 30 V DC	3 A @ 24 V AC 3 A @ 30 V DC
	Ubungakanani bomthwalo osebenzayo.	75 VA @ 230 V AC 30 W @ 30 V DC	8 VA @ 24 V AC 30 W @ 30 V DC
Ujongano	RS485 isiqingatha duplex, Modbus okanye BACnet, ukuya 128 izixhobo kwi ibhasi
Idilesi	Misela ngokutshintsha kuluhlu ukusuka ku-0 ukuya ku-99
izinga lobubi	Misela ngokutshintsha kuluhlu ukusuka kwi-2400 ukuya kwi-115200 bps
Ukukala ukhuseleko lokungena	IP40 – yofakelo lwangaphakathi
Ubushushu	Ukusebenza: -10°C ukuya +50°C (14°F ukuya ku-122°F) Ukugcina: -40 ° C ukuya kwi-85 ° C (-40 ° F ukuya kwi-185 ° F)
Ubuntu bezizalwane	I-5 ukuya kwi-95% ye-RH (ngaphandle kokudibanisa)
Izihlanganisi	Okwahlulwayo, max 2.5 mm2 (18 – 12 AWG)
Ubungakanani	88x110x62 mm (3.46 × 4.33 × 2.44 kwi)
Ukunyuka	I-DIN yokunyuswa kukaloliwe (DIN EN 50022 eqhelekileyo)
Izinto zendlu	Iplastiki, iPC/ABS ezicimayo

IPhaneli ephezulu

IMIGALELO YEZONKE

IZIBONELELO ZEDIJALI

IZIPHUMO ZEDIGITAL

UNXIBELELWANO

UKUNIKEZWA AMANDLA

IZIPHUMO ZE-ANALOG

ISILUMKISO

• Qaphela, i-wiring engalunganga yale mveliso inokuyonakalisa kwaye ikhokelela kwezinye iingozi. Qinisekisa ukuba imveliso ifakwe ngokuchanekileyo iintambo phambi kokuba uvule umbane.
• Phambi kocingo, okanye ukususa/ukunyuswa kwemveliso, qiniseka ukuba Ucime umbane. Ukusilela ukwenza oko kunokubangela ukothuka kombane.
• Sukubamba iindawo ezitshajwa ngombane njengeetheminali zombane. Ukwenza oko kunokubangela ukothuka kombane.
• Musa ukuyichitha imveliso. Ukwenza oko kunokubangela ukothuka kombane okanye ukusebenza kakubi.
• Sebenzisa imveliso ngaphakathi koluhlu lokusebenza olucetyiswayo kwinkcazo (ubushushu, ukufuma, umthamotage, ukothuka, indlela yokunyuka, umoya, njl. njl.). Ukusilela ukwenza oko kunokubangela umlilo okanye umsebenzi ongalunganga.
• Gxininisa ngokuqinileyo iingcingo kwi-terminal. Ukungaqini ngokwaneleyo kweengcingo kwitheminali kunokubangela umlilo.

IZITHOMBE ZESIXHOBO

RS485 BIASINABAQHUBI BAMAGQABANE

EN 60730-1 UKUQWALASELWA KOMNIKELO WAMANDLA

• Ukhuseleko lombane kwi-automation yesakhiwo kunye neenkqubo zokulawula ngokusisiseko zisekelwe ekusebenziseni i-voltage ephantsi eyongezelelweyotage eyahlulwe ngokungqongqo kwi-mains voltage. Lo mqulu ophantsitage yi-SELV okanye i-PELV ngokwe-EN 60730-1.
• Ukukhuselwa kumothuko wombane kuqinisekiswa ngala manyathelo alandelayo:
  • umda wevoltage (umthamo ophantsitage AC/DC 24V ubonelelo, nokuba SELV okanye PELV)
  • Ukukhusela-ukwahlulwa kwe-SELV-nkqubo kuzo zonke iisekethe ngaphandle kwe-SELV kunye ne-PELV
  • Ukwahlula okulula kwe-SELV-nkqubo ukusuka kwezinye iinkqubo ze-SELV, ukusuka kwiinkqubo ze-PELV kunye nomhlaba.
• Izixhobo zentsimi ezifana nabenzi boluvo, abafowunelwa besimo kunye nee-actuators eziqhagamshelwe kwi-low-voltagamagalelo kunye neziphumo zeemodyuli ze-I/O kufuneka zihambelane neemfuno ze-SELV okanye i-PELV. Uthungelwano lwezixhobo zentsimi kunye nezinye iinkqubo kufuneka zanelise iimfuno ze-SELV okanye ze-PELV.
• Xa unikezelo lweesekethe ze-SELV okanye ze-PELV lufunyenwe kunikezelo lwee-main eziphambili zevolthi ephezulutagIza kubonelelwa ngesiguquli sokhuseleko okanye isiguquli esiguquguqukayo esenzelwe ukusebenza ngokuqhubekayo ukubonelela ngeesekethe ze-SELV okanye ze-PELV.

QAPHELA LOTHOBELO lweFCC

Phawula: Esi sixhobo sivavanyiwe kwaye sifunyenwe ukuthobela imida yeDivaysi yedijithali yeCandelo B, phantsi kwecandelo le-15 leMithetho yeFCC. Le mida yenzelwe ukubonelela ngokhuseleko olufanelekileyo ekuphazamisekeni okuyingozi kwindawo yokuhlala. Esi sixhobo sivelisa, sisebenzise kwaye sinokusasaza amandla amaza erediyo kwaye, ukuba asifakanga kwaye sisetyenziswa yimiyalelo, sinokubangela uphazamiseko oluyingozi kunxibelelwano lwerediyo. Nangona kunjalo, akukho siqinisekiso sokuba ukuphazamiseka akuyi kwenzeka kufakelo oluthile. Ukuba esi sixhobo sibangela uphazamiseko oluyingozi kunomathotholo okanye ulwamkelo lukamabonakude, olunokumiselwa ngokucinywa nokulayita isixhobo, umsebenzisi uyakhuthazwa ukuba azame ukulungisa uphazamiseko ngenye okanye ngaphezulu kwezi ndlela zilandelayo:

• Jongisa kwakhona okanye uhambise i-eriyali efumanayo.
• Ukwandisa ukwahlukana phakathi kwesixhobo kunye nomamkeli.
• Qhagamshela izixhobo kwindawo yokuphuma kwisekethe eyahlukileyo kuleyo apho umamkeli aqhagamshelwe khona.
• Dibana nomthengisi okanye igcisa likanomathotholo/kumabonakude ukuze ufumane uncedo.

I-WIRING

• Iintambo zamandla ombane kufuneka zihanjiswe ngokuhlukana kwendawo ukusuka kumqondiso kunye neentambo zokuhambisa idatha.
• Iintambo ze-analog kunye nedijithali kufuneka zihlulwe.
• Kunconywa ukusebenzisa iintambo ezikhuselekileyo kwiimpawu ze-analog, izikhuselo zekhebula akufanele ziphazamiseke ngamatheminali aphakathi.
• Ukukhusela kufuneka kufakwe emhlabeni ngokuthe ngqo emva kokuba ikhebula lingene kwikhabhinethi.
• Kucetyiswa ukuba kufakwe izicinezeli zokuphazamiseka xa utshintshela imithwalo eguquguqukayo (umzekelo, iikhoyili ze-contactors, ii-relays, i-solenoid valves). I-RC snubbers okanye i-varistors ifanelekile kwi-AC voltage kunye freewheeling diodes for DC voltage imithwalo. Izinto ezicinezelayo kufuneka zidibaniswe ngokusondeleyo kwikhoyili ngokusemandleni.

ISIKHOKELO SOKUFAKA

Nceda ufunde imiyalelo phambi kokusebenzisa okanye ukusebenzisa isixhobo. Kwimeko yayo nayiphi na imibuzo emva kokufunda olu xwebhu, nceda uqhagamshelane neQela leNkxaso le-iSMA CONTROLLI (support@ismacontrolli.com).

• Ngaphambi kocingo okanye ukususa / ukunyuswa kwemveliso, qiniseka ukuba ucima umbane. Ukusilela ukwenza oko kunokubangela ukothuka kombane.
• I-wiring engafanelekanga yemveliso inokuyonakalisa kwaye ikhokelela kwezinye iingozi. Qinisekisa ukuba imveliso ifakwe iintambo ngokuchanekileyo phambi kokuba uvule umbane.
• Sukubamba iindawo ezitshajwa ngombane njengeetheminali zombane. Ukwenza oko kunokubangela ukothuka kombane.
• Musa ukuyichitha imveliso. Ukwenza oko kunokubangela ukothuka kombane okanye ukusebenza kakubi.
• Sebenzisa imveliso kuphela ngaphakathi koluhlu lokusebenza olucetyiswayo kwinkcazo (ubushushu, ukufuma, umthamotage, umothuko, indlela yokunyuka, umoya, njl. njl.). Ukungakwenzi oko kunokubangela umlilo okanye umsebenzi onempazamo.
• Gxininisa ngokuqinileyo iingcingo kwi-terminal. Ukungakwenzi oko kunokubangela umlilo.
• Kuphephe ukufaka imveliso kufutshane nezixhobo zombane ezinamandla aphezulu kunye neentambo, imithwalo ye-inductive, kunye nezixhobo zokutshintsha. Ukusondela kwezinto ezinjalo kunokubangela ukuphazamiseka okungalawulwayo, okukhokelela ekusebenzeni okungazinzanga kwemveliso.
• Ukulungelelaniswa okufanelekileyo kwamandla kunye ne-signal cabling kuchaphazela ukusebenza kwayo yonke inkqubo yokulawula. Kuphephe ukubeka amandla kunye neengcingo zomqondiso kwiitreyi zentambo ezihambelanayo. Inokubangela ukuphazamiseka kwiimpawu ezibekwe esweni kunye nokulawula.
• Kunconywa kubalawuli bamandla / iimodyuli kunye nababoneleli bamandla be-AC / DC. Banikezela nge-insulation engcono kwaye ezinzileyo yezixhobo xa kuthelekiswa neenkqubo ze-AC / AC ze-transformer, ezihambisa ukuphazamiseka kunye neziganeko ezidlulayo ezifana nokunyuka kunye nokuqhuma kwizixhobo. Bakwahlukanisa iimveliso ezivela kwi-inductive phenomena kwezinye ii-transformers kunye nemithwalo.
• Iinkqubo zonikezelo lwamandla kwimveliso kufuneka zikhuselwe zizixhobo zangaphandle ezinciphisa ukugqithiswa kombanetage kunye neziphumo zokukhutshwa kombane.
• Gwema ukunika amandla imveliso kunye nezixhobo ezilawulwayo / ezibekwe esweni, ngakumbi amandla aphezulu kunye nemithwalo ye-inductive, ukusuka kumthombo wamandla omnye. Izixhobo zamandla ezivela kumthombo wamandla omnye zibangela umngcipheko wokwazisa ukuphazamiseka kwimithwalo ukuya kwizixhobo zokulawula.
• Ukuba i-AC / AC i-transformer isetyenziselwa ukubonelela ngezixhobo zokulawula, kucetyiswa ngamandla ukuba kusetyenziswe ubuninzi be-100 VA Class 2 transformers ukuphepha imiphumo engafunekiyo ye-inductive, eyingozi kwizixhobo.
• Imigca emide yokubeka iliso kunye nokulawula inokubangela iilophu malunga nokunikezelwa kwamandla okwabelwana ngawo, okubangela ukuphazamiseka ekusebenzeni kwezixhobo, kubandakanywa unxibelelwano lwangaphandle. Kunconywa ukusebenzisa i-galvanic separators.
• Ukukhusela umqondiso kunye nemigca yonxibelelwano ngokuchasene nokuphazamiseka kwe-electromagnetic yangaphandle, sebenzisa iintambo ezikhuselekileyo eziphantsi kunye namaso e-ferrite.
• Ukutshintshela ukuhanjiswa kwemveliso yedijithali yemithwalo emikhulu (egqithileyo) imithwalo ye-inductive kunokubangela ukuphazamiseka kwe-pulses kumbane ofakwe ngaphakathi kwemveliso. Ngoko ke, kucetyiswa ukuba kusetyenziswe ii-relays zangaphandle / abafowunelwa, njl njl ukutshintsha imithwalo enjalo. Ukusetyenziswa kwabalawuli abaneziphumo ze-triac kwakhona kunciphisa ukugqithisa okufanayotage iziganeko.
• Iimeko ezininzi zokuphazamiseka kunye nokugqithisatagkwiisistim zolawulo ziveliswa ngokutshintshwa, imithwalo ye-inductive enikezelwa ngokutshintshana kwee-mains vol.tage (AC 120/230 V). Ukuba abanazo iisekethe ezakhelwe ngaphakathi zokunciphisa ingxolo, kuyacetyiswa ukuba kusetyenziswe iisekethe zangaphandle ezifana ne-snubbers, i-varistors, okanye i-diode yokukhusela ukunciphisa ezi ziphumo.

Ukufakwa kombane kule mveliso kufuneka kwenziwe ngokuhambelana neekhowudi zocingo zelizwe kwaye zihambelane nemimiselo yendawo

Silandele kwi: /bmetersuk www.bmetersuk.com
I-iSMA

Amaxwebhu / Izibonelelo

B IMITHA ISMA-B-MIX18 Mix Igalelo kunye neModyuli yokuPhuma [pdf] Isikhokelo soFakelo ISMA-B-MIX18, ISMA-B-MIX18 Imixube yeModyuli yokuNgenisa kunye neSiphumezo, iModyuli yoHlulo lweNgeniso kunye neSiphumezo, iModyuli yokuNgenisa kunye neZiPhumo, iModyuli yokuPhuma, iModyuli.

Iimbekiselo

• Incwadi yokusebenzisa