CORE Stunt Scooter Stand Instruction Manual

Model: CORE SCOOTER WALL & FLOOR STAND

This manual provides comprehensive instructions for the proper setup, operation, and maintenance of your CORE Stunt Scooter Stand. Please read this manual thoroughly before use to ensure optimal performance and safety.

1. Imveliso iphelileview

The CORE Stunt Scooter Stand is a versatile accessory designed for convenient storage of stunt scooters. It functions as both a floor stand and a wall mount, accommodating various wheel sizes and helping to organize your space.

Umfanekiso: Ngaphambili view of the CORE Stunt Scooter Stand.

A black CORE stunt scooter stand, viewed from the side, highlighting its curved design and the two distinct cradles for scooter wheels or handlebars.

Umfanekiso: Ecaleni view of the CORE Stunt Scooter Stand.

Ezona mpawu:

Iinjongo ezimbini: Functions as a floor stand or a wall mount.
Ukuhambelana kwendalo yonke: Designed to fit most stunt scooters, including wheels up to 30mm width and 125mm diameter.
Ulwakhiwo oluZinzileyo: Made from high-quality injection-molded plastic.
Pre-molded Drill Holes: Ukufakwa lula eludongeni.

2. Imiyalelo yokuSeta

2.1. Floor Stand Configuration

To use the CORE Stunt Scooter Stand as a floor stand, simply place it on a flat, stable surface. The stand is designed to cradle the scooter's wheel, providing stability.

Select a flat and stable area for placement.
Position the stand with the wider base on the floor.
Gently roll the scooter's front or rear wheel into the designated groove of the stand. Ensure the scooter is balanced.

A stunt scooter with a pink wheel resting securely in the black CORE scooter floor stand on an asphalt surface next to a skate park.

Image: Scooter positioned in the floor stand.

2.2. Wall Mount Configuration

For wall mounting, the stand features pre-molded drill holes. Appropriate wall plugs and screws (not provided) are required for secure installation.

Khetha Indawo: Select a suitable wall location, ensuring it is sturdy enough to support the scooter's weight. Consider the height for easy access to the scooter handlebars.
Amanqaku e-Mark Drill: Hold the stand against the wall at the desired height and use a pencil to mark the positions of the two pre-molded drill holes.
Gqoka imingxuma: Drill pilot holes at the marked points. The size of the drill bit should match the recommended size for your chosen wall plugs.
Faka iiplagi zodonga: Insert appropriate wall plugs (e.g., for plasterboard or masonry) into the drilled holes. Note: Wall plugs are not provided.
Indawo ekhuselekileyo: Align the stand with the wall plugs and secure it firmly using screws (not provided). Ensure the stand is level and tightly fastened to the wall.
Mount Scooter: Once secured, hang your scooter by its handlebars onto the upper hooks of the wall-mounted stand.

A split image showing the CORE scooter stand used as a floor stand on the left and as a wall mount holding a scooter by its handlebars on the right, illustrating its dual purpose.

Image: Illustration of the stand's dual purpose as a floor stand and a wall mount.

3. Imiyalelo yokusebenza

3.1. Using as a Floor Stand

To store your scooter using the floor stand, simply roll the front or rear wheel into the stand's groove. The stand will hold the scooter upright. Ensure the scooter is centered and stable before leaving it unattended.

3.2. Using as a Wall Mount

To store your scooter using the wall mount, lift the scooter and hook its handlebars over the upper arms of the mounted stand. Ensure the handlebars are securely seated in the hooks to prevent accidental falls.

4. Isondlo

Ukucoca: Sula ukuma ngentengisoamp ilaphu lokususa uthuli kunye nokungcola. Ziphephe izinto zokucoca ezirhabaxa.
Uhlolo: Periodically check the wall mount screws for tightness to ensure the stand remains securely fastened.
Ugcino: Store the stand in a dry place when not in use.

5. Ukuxazulula ingxaki

Issue: Scooter is unstable or falls over when using as a floor stand.

Isisombululo 1: Ensure the stand is placed on a completely flat and level surface. Uneven surfaces can compromise stability.
Isisombululo 2: Verify that the scooter's wheel is fully seated and centered within the stand's groove.
Isisombululo 3: Check the scooter's wheel size. While designed for universal fit, extremely narrow or wide wheels might affect stability.

Issue: Wall mount feels loose after installation.

Isisombululo 1: Re-tighten the mounting screws.
Isisombululo 2: Ensure appropriate wall plugs were used for your wall type (e.g., plasterboard, masonry) and that they are correctly installed.
Isisombululo 3: If the wall material is weak or damaged, consider relocating the mount to a more secure section of the wall.

6. Iinkcukacha

A diagram showing the dimensions of the CORE stunt scooter stand: 92mm (3.6 inches) width, 40mm (1.6 inches) depth for the wheel cradle, and 62mm (2.4 inches) height.

Image: Dimensions of the CORE Stunt Scooter Stand.

Uphawu	Iinkcukacha
Uphawu	INQAKU
Igama loMfanekiso	CORE SCOOTER WALL & FLOOR STAND
Izinto eziphathekayo	Inayiloni
Ubunzima bento	Iigram ezili-190
Ubungakanani bephakheji (L x W x H)	8.66 x 5.91 x 2.36 intshi
Ukuhambelana kwevili	Fits 24mm and 30mm wheel widths, up to 125mm diameter
Amacandelo aqukiweyo	Scooter Stand - Kick Stand/Wall Mount

7. Iwaranti kunye neNkxaso

Iwaranti: This product comes with a 90-day warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

For support or warranty inquiries, please contact CORE customer service through the retailer where the product was purchased or visit the official CORE webindawo.

	Ukuseta iAmazon Alexa ngeCore Smart Home Isikhokelo senyathelo ngenyathelo sokudibanisa izigcawu zeCore Smart Home kunye neAmazon Alexa, senza kube lula ukulawula ilizwi ngezixhobo zeAmazon Echo.
	Itente yeBlockOut Dome yeCore 9-Person: Isikhokelo sokuseta, ukhathalelo, kunye nokhuseleko Incwadi yemiyalelo eneenkcukacha zeCORE 9-Person BlockOut Dome Tent (Model 40341), egubungela ukuseta, ukususwa, ukhathalelo, imibuzo ebuzwa rhoqo, kunye nezilumkiso ezibalulekileyo zokhuseleko lokhuselekoampngamava.
	Isikhokelo sokuQalisa esiKhawulezayo se-Eclipse R-ECS-86-KNX-THCO2 Isikhokelo sokuqalisa ngokukhawuleza seCore Eclipse Push-Button Switch (R-ECS-86-KNX-THCO2), echaza iinkcukacha zobugcisa, umxholo wephakheji, umzobo wobukhulu, izimvo zokhuseleko, imiyalelo yokufaka, kunye neenkqubo zokugunyazisa iinkqubo zasekhaya ezikrelekrele ze-KNX.
	Isikhokelo sokuQala esiKhawulezayo seSamsung NASA Gateway \| Ukuhlanganiswa kweKNX Isikhokelo sokuqalisa ngokukhawuleza seCore Samsung NASA KNX Gateway (CR-CG-SMG-KNX-01). Funda malunga nokufakelwa, uqhagamshelo, kunye nokuqaliswa kokuhlanganiswa okungenamthungo nee-air conditioners zeSamsung kunye neenkqubo zeKNX.
	Intente yeKhabini ekhawulezileyo yabantu abali-12 - Isikhokelo sokuseta nokunyamekela abantu abali-18 x 10 Isikhokelo esipheleleyo sokuseta, ukusebenzisa, kunye nokugcina iTente yeCORE 12 Person Instant Cabin - 18 x 10. Ibandakanya imiyalelo yokuseta, imibuzo ebuzwa rhoqo, izilumkiso kunye nolwazi lwewaranti.
	CORE 9 Person Extended Dome Tent - 16 x 9 Setup and Care Guide (Model 40004) Comprehensive setup, takedown, care, and warranty information for the CORE 9 Person Extended Dome Tent (Model 40004). Includes step-by-step instructions, FAQs, and safety warnings.

CORE CORE SCOOTER WALL & FLOOR STAND