ASAMSON IS7 Ultra Compact Line Array Enclosure

Ukhuseleko & Izilumkiso

	Funda le miyalelo, yigcine ifumaneka ukuze uyisebenzise. Le ncwadana inokukhutshelwa kwi https://www.adamsonsystems.com/en/support/downloads-directory/is-series/is7
	Mamela zonke izilumkiso kwaye ulandele yonke imiyalelo.
	Uchwepheshe oqeqeshiweyo kufuneka abe khona ngexesha lofakelo kunye nokusetyenziswa kwale mveliso. Le mveliso iyakwazi ukuvelisa amanqanaba oxinzelelo lwesandi aphezulu ngokugqithisileyo kwaye kufuneka isetyenziswe ngokungqinelana nemigaqo echaziweyo yomgangatho wesandi sasekhaya kunye nengqiqo elungileyo. I-Adamson Systems Engineering ayisayi kuba noxanduva lomonakalo owenziwe kuko nakuphi na ukusetyenziswa kakubi kwale mveliso.
	Inkonzo iyafuneka xa isandisi-lizwi sonakaliswe nangayiphi na indlela, njengaxa siwisiwe isandisi-lizwi; okanye xa ngenxa yezizathu ezingamiselwanga isandisi-lizwi singasebenzi ngokuqhelekileyo. Zihlole rhoqo iimveliso zakho ukuze ubone naziphi na izitenxo ezibonakalayo okanye zokusebenza.

Khusela i-cabling ekuhanjweni kuyo okanye ekucuthweni.

Funda i-IS-Series Rigging Manual efanelekileyo ngaphambi kokufaka imveliso.

Nika ingqalelo kwimiyalelo yokurhwaphiliza ebandakanywe kuzo zombini iBlueprint AV™ kunye ne-IS-Series Rigging Manual.

Sebenzisa kuphela ngezakhelo zokuriga/izixhobo ezichazwe ngu-Adamson, okanye ezithengiswa ngenkqubo yesandisi-lizwi.

Le ndawo ebiyelweyo yesithethi iyakwazi ukwenza imagnethi eyomeleleyo. Nceda usebenzise isilumkiso kufutshane nendawo ebiyelweyo enezixhobo zogcino lwedatha ezifana neehard drives

Kwiinzame zokuqhubeka nokuphucula iimveliso zayo, i-Adamson ikhupha isoftware ehamba kunye, ukusetha kwangaphambili kunye nemigangatho yeemveliso zayo. U-Adamson unelungelo lokutshintsha imilinganiselo yeemveliso zayo kunye nomxholo wamaxwebhu ayo ngaphandle kwesaziso sangaphambili.

IS7 Ultra Compact Line Array

• I-IS7 yi-ultra-compact line array enclosure eyenzelwe izicelo zokuphosa okuphakathi. Iqulethe ii-7 ″ ze-LF transducers ezimbini ezilungelelanisiweyo kunye ne-3 ″ yomqhubi woxinzelelo lwe-HF obekwe kwigumbi lesandi le-Adamson. Igumbi lesandi eliphakamileyo lesandi liyilelwe ukuba lidibanise iikhabhathi ezininzi kuyo yonke ibhendi yefrikhwensi ecetywayo ngaphandle kokulahleka kokuhambelana.
• Uluhlu lwamaza okusebenza lwe-IS7 luyi-80 Hz ukuya kwi-18 kHz. Ukusetyenziswa kobuchwephesha bobunini obufana neTekhnoloji yoSishwankathelo eLawulayo kunye ne-Advanced Core Architecture ivumela i-SPL ephezulu kwaye igcine iphethini ehambelanayo yokusabalalisa ethe tye ye-100 ° phantsi ukuya kwi-400 Hz.
• Indawo ebiyelweyo inoyilo olubonakalayo olungabonakaliyo oludibanisa ngokungenamthungo kwindawo ejikelezileyo, yenziwe nge-plywood ye-birch grade grade, kwaye inenkqubo yokurhweba ngamanqaku amane. Ngaphandle kokuncama i-resonance ephantsi kwizinto ezidibeneyo, i-IS7 inobunzima be-14 kg / 30.9 lbs kuphela.
• Ukuya kuthi ga kwishumi elinesithandathu i-IS7 inokubhabha kuluhlu olufanayo xa usebenzisa i-IS7/IS118 Rigging Frame kunye nokuya kuthi ga kwisibhozo xa usebenzisa i-IS7 Micro Frame. Iindawo ezilithoba zokurhweba ziyafumaneka, zivumela ii-angles ezithe nkqo phakathi kwekhabhinethi ukusuka ku-0 ° ukuya kwi-10 °. Soloko ujongana ne-Blueprint AVTM kunye ne-IS-Series Line Array Rigging Manual ngeendawo ezichanekileyo zokurhwitha (kubandakanywa iinketho zokupakishwa komhlaba) kunye neenkqubo zofakelo.
• I-IS7 ijoliswe ukuba isetyenziswe njengenkqubo yokuzimela okanye kunye ne-IS118 companion subwoofer, ezisa uluhlu lwamaza okusetyenziswa phantsi kwe-35 Hz. I-IS7 inokudityaniswa nezinye ii-subwoofers ze-IS-Series.
• IS7 yenzelwe ukusetyenziswa kunye nomgca we-D-Series weLab.gruppen wofakelo ampiilifi. I-impedance yegama le-IS7 yi-16 ngebhendi nganye, ukwandisa ampukusebenza kwe-lifier.

Iintambo

• I-IS7 (971-0003, 971-5003) ihamba kunye ne-2x Neutrik SpeakonTM NL4 uxhulumaniso, olufakwe kwi-parallel.
• I-IS7b (971-0004, 971-5004) iza nomqobo womqobo wangaphandle.
• Izikhonkwane ze-1 +/- zixhunywe kwi-2x ND7-LM8 MF transducers, ezifakwe kwi-parallel.
• Izikhonkwane ze-2 +/- zixhunyiwe kwi-NH3-16 HF transducer.

Ampukungqinisisa

I-IS7 idityaniswe neLab.gruppen D-Series ampabaphilayo.

Ubuninzi bomthamo we-IS7 nge ampimodeli ye-lifier iboniswe ngezantsi.

Ngoluhlu oluphambili, nceda ubhekisele kwi-Adamson AmpItshathi yokukhanyisa, efumaneka kwi-Adamson webindawo.
https://adamsonsystems.com/support/downloads-directory/design-and control/erack/283-amplification-chart-9/file

Ukusetha kwangaphambili

I-Adamson Load Library (http://adamsonsystems.com/support/downloadsdirectory/design-and-control/e-rack/245-adamson-load-library-5-0-1/file) iqulethe iiseti zangaphambili eziyilelwe iintlobo ngeentlobo zezicelo ze-IS7. Ukusetha kwangaphambili ngakunye kujongwe ukuba kube yi-phaselinear nokuba yi-IS118 okanye i-IS119 subwoofers. Xa iikhabhinethi kunye ne-subwoofers zibekwe ngokwahlukileyo, ukulungelelaniswa kwesigaba kufuneka kulinganiswe ngesofthiwe efanelekileyo.

IS7 Lipfill
Yenzelwe ukusetyenziswa kunye ne-IS7 enye

IS7 Mfutshane
Yenzelwe ukusetyenziswa kunye noluhlu lwe-4 ukuya kwi-6 IS

IS7 uluhlu
Yenzelwe ukusetyenziswa kunye noluhlu lwe-7 ukuya kwi-11 IS7

Ulawulo

Ulungelelwaniso Ukubunjwa kwalekene (ifunyenwe kwi Uluhlu lweefolda zokuYilwa kweThala leencwadi laseAdamson) inokukhunjulwa kwicandelo le-EQ loMlawuli weLake ukulungisa i-contour yoluhlu. Ukukhumbula isaleka se-EQ esifanelekileyo okanye ukusetwa kwangaphambili kwenani leekhabhathi ezisetyenziswayo kuya kunika impendulo eqhelekileyo ye-Aamson yoluhlu lwakho, ihlawulela ukudityaniswa kwefrikhwensi eyahlukileyo.

Ukutyekeza ukwaleka (ifunyenwe kwi Uluhlu lweefolda zokuYilwa kweThala leencwadi laseAdamson) inokusetyenziselwa ukuguqula yonke impendulo ye-acoustic yoluhlu. Izigqubuthelo ezithe tye zisebenzisa isihluzi, esisembindini we-1kHz, esifikelela kwi-decibel esikiweyo ephawulweyo okanye eyonyuswe kwiziphelo ezigqithisileyo zomamela. Umzekeloample, i +1 Tilt iya kusebenza +1 decibel ku-20 kHz kunye ne-1 decibel ku-20 Hz. Ngenye indlela, i--2 Tilt iya kusetyenziswa -2 decibels kwi-20 kHz kunye ne-2 decibels kwi-20 Hz.

Nceda ubhekisele kwi-Adamson PLM & Lake Handbook ngemiyalelo eneenkcukacha yokukhumbula iTilt neArray Shaping umaleko. https://adamsonsystems.com/support/downloads-directory/design-and-control/e-rack/205-adamsonplm-lake-handbook/file

Yemozulu

IS-Series iimodeli zemozulu zongeza umaleko owongezelelweyo wokusingqongileyo kunye nokukhusela umhlwa kuyilo lwekhabhathi ka-Adamson esele ihleli ixesha elide. Iindawo ezivaliweyo zemozulu zilungele iindawo zaselwandle naselunxwemeni, amabala emidlalo angaphandle, iindawo zokusebenza ezivulekileyo, kunye nolunye ufakelo olusisigxina lwangaphandle. IS-Series iikhabhinethi zemozulu zibandakanya ezi zinto zilandelayo zokukhusela ezongezelelweyo.

Ukumelana nokubola
Ukumelana nomhlwa kwandisa ukusebenza kwenkqubo yakho ubomi bonke kwiindawo ezingaphandle apho amanzi, ityuwa kunye neasidi inokuchaphazela ukuqina kunye nokusebenza.
Zonke izakhi zensimbi ze-Adamson zekhabhinethi zemozulu ezibandakanya ukuqhafaza kunye nokuqhafaza ikhonkco zenziwe nge-alloy ephezulu ye-stainless steel alloy enika i-100% ukumelana nokugqwala.
Izixhobo zekhabhinethi zenziwe ngentsimbi engatyibilikiyo, eyilelwe ukunika umhlwa okhethekileyo kunye nokumelana nomhlwa, ngakumbi kwiindawo ezinetyuwa eninzi.

Ukutywinwa kwendalo
Ukhuseleko olongezelelweyo lwekhabhinethi lunceda ekuqinisekiseni ukuba ukusebenza kwesandisi-lizwi akuthintelwa ziimeko ezingqongileyo ezirhabaxa apho inkqubo yakho ibekwe khona.
Ukugada ukungenelela kwamanzi kunye ne-particle intrusion, i-polyurea efanayo yamacandelo amabini enika iikhabhinethi ze-Adamson ukhuseleko lwangaphandle lwangaphandle lusetyenziselwa ngaphakathi kwendawo evaliweyo, ukudala isitywina esipheleleyo. Iimodeli ezinomgangatho wemozulu zineengubo zangaphandle ezinomphetho ogudileyo owahlukileyo ovumela ukucocwa lula kunye nokususwa kwezinto ezingcolisa ezifana nobumdaka, ubumdaka, amanzi etyuwa okanye isanti.
Ukukhusela uthuli kunye nezinye iinqununu, i-mesh yensimbi engenasici yongezwa kuzo zonke iindawo zokungena ezibandakanya emva kwezikrini zangaphambili zegrille.
I-Cabling ye-IS-Series iikhabhathi zemozulu zifakwe ngaphambili kwaye zikhuselwe ngaphakathi kwe-gasket-sealed jackplate, kunye namantongomane e-gland kwindawo yokutywina iindawo zokudibanisa.

IiNgcaciso zobuGcisa

Uluhlu lokuphindaphinda (- 6 dB)	80 Hz – 18 kHz
UNgqongo ngokweMiqathango (-6 dB) H x V	100° x 12.5°
Ubuninzi beNcopho ye-SPL**	138
Amacandelo LF	2x ND7-LM8 7” Neodymium Driver
I-Nominal Imedance LF	NH3 3” Diaphragm / 1.4” Phuma kuQhubekiso loMqhubi
I-Nominal Imedance HF	16 Ω (2 x 8 Ω
Ukuphathwa kwamandla (AES / Peak) LF	16 Ω
Ukuphathwa kwamandla (AES / Peak) HF	500 / 2000 W
Rigging	110 / 440 W
Uqhagamshelwano	Inkqubo eDityanisiweyo yokuRigging
Ubude bangaphambili (mm / ngaphakathi)	2x Speakon™ NL4 okanye izithintelo zemitya
Ububanzi (mm / ngaphakathi)	236 / 9.3
Ubude obubuyayo (mm / ngaphakathi)	122 / 4.8
Ububanzi (mm / ngaphakathi)	527 / 20.75
Ubunzulu (mm / ngaphakathi)	401 / 15.8
Ubunzima (kg / lbs)	14 / 30.9
Umbala	Mnyama & Mhlophe (RAL 9010 njengesiqhelo, eminye imibala ye-RAL xa ifunwa)
Iyaqhuba	Ichibi

**12 dB crest factor pink ingxolo kwi-1m, ibala lasimahla, kusetyenziswa ukusetyenzwa okuchaziweyo kunye ampukungqinisisa

Amaxwebhu / Izibonelelo

ASAMSON IS7 Ultra Compact Line Array Enclosure [pdf] Incwadi yokusebenzisa IS7, Ultra Compact Line Array Enclosure

Iimbekiselo

• Incwadi yokusebenzisa