LS GDL-D22C Programmable Logic Controller

Imiyalelo yokusetyenziswa kwemveliso

• Musa ukuqhagamshelana neetheminali ngelixa umbane usetyenziswa.
• Qinisekisa ukuba akukho miba yesinyithi yangaphandle.
• Musa ukuyisebenzisa kakubi ibhetri (ukutshaja, ukuqhawula, ukubetha, mfutshane, ukusoda).
• Qiniseka ukuba ujonga umthamo olinganisiweyotage kunye nolungiselelo lwetheminali phambi kocingo.
• Xa ufaka iintambo, qinisa isikrufu sebhloko yetheminali ngoluhlu oluchaziweyo lwetorque.
• Musa ukufaka izinto ezinokutsha kwindawo ezingqongileyo. Musa ukusebenzisa i-PLC kwindawo enentshukumo ethe ngqo.
• Ngaphandle kwabasebenzi benkonzo yeengcali, musa ukuqhawula, ukulungisa, okanye ukuguqula imveliso.
• Sebenzisa i-PLC kwimeko-bume ehlangabezana neenkcukacha ngokubanzi eziqulethwe kule datha.
• Qinisekisa ukuba umthwalo wangaphandle awudluli umlinganiselo wemodyuli yokuphuma.
• Xa ulahla i-PLC kunye nebhetri, yiphathe njengenkunkuma yamashishini. Isignali ye-I/O okanye umgca wonxibelelwano uya kutsalelwa ubuncinane i-100mm kude ne-high-voltagIntambo ye-e okanye intambo yombane.
• I-PLC kufuneka iqhutywe phakathi kobushushu obuphakathi kwe-5°C ukuya kuma-70°C kunye noluhlu lokufuma lwe-5%RH ukuya kwi-95%RH.
• Qinisekisa ukuba i-PLC ibekwe kwindawo engenazo iintshukumo ezithe ngqo kunye nezinto ezinokutsha.

FAQ

• Umbuzo: Ndingayisebenzisa i-PLC kwindawo enomswakama ophezulu?
  • A: I-PLC inokusebenza kumanqanaba okufuma ukusuka kwi-5% RH ukuya kwi-95% RH. Qinisekisa ukungena komoya okufanelekileyo kunye nokukhuselwa kwi-condensation.
• Umbuzo: Ndifanele ndiyilahle njani i-PLC kunye nebhetri yayo?
  • A: Xa ulahla i-PLC kunye nebhetri, ziphathe njengenkunkuma yemizi-mveliso ngokwemigaqo yendawo. Musa ukuzilahla kwinkunkuma yendlu eqhelekileyo.
• Umbuzo: Uthini umgama ocetyiswayo weempawu ze-wiring ze-I/O okanye imigca yonxibelelwano?
  • A: Iimpawu zocingo ze-I / O okanye imigca yonxibelelwano ubuncinane i-100mm kude ne-high-voltagIintambo ze-e okanye iintambo zombane ukuthintela ukuphazamiseka okanye umonakalo.

Isikhokelo sokuFakela isiLawuli esiQinisekisayo

• Smart IO Dnet GDL-D22C,D24C,DT4C/C1 GDL-TR2C/C1,TR4C/C1,RY2C

Esi sikhokelo sofakelo sibonelela ngolwazi olulula lomsebenzi okanye ulawulo lwePLC. Nceda ufunde ngononophelo olu xwebhu lwedatha kunye neencwadana ngaphambi kokusebenzisa iimveliso. Ngokukodwa funda izilumkiso emva koko uphathe iimveliso ngokufanelekileyo.

ImiGaqo yoKhuseleko

• Intsingiselo yeleyibhile yesilumkiso kunye nesilumkiso

ISILUMKISO ibonisa imeko enokuba yingozi, ukuba ayithintelwa, inokubangela ukufa okanye ukwenzakala okungathethekiyo
ISILUMKO ibonisa imeko enokuba yingozi enokuthi, ukuba ayiphetshwa, ingabangela ukwenzakala okungephi okanye okuphakathi. Isenokusetyenziswa ukulumkisa ngokuchasene nezenzo ezingakhuselekanga

ISILUMKISO

① Musa ukuqhagamshelana neetheminali ngelixa umbane usetyenziswa. ② Qinisekisa ukuba akukho micimbi yesinyithi yangaphandle. ③ Musa ukuyilawula ibhetri(itshaji, iqhaqhe, iyabetha, imfutshane, iyanyibilikisa).

ISILUMKO

① Qiniseka ukuba ujonga ivolthi ekalisiweyotage kunye nolungiselelo lwetheminali phambi kocingo ② Xa ufaka iingcingo, qinisa isikrufu sebhloko yetheminali ngoluhlu oluchaziweyo lwetorque ③ Musa ukufaka izinto ezinokutsha kwindawo ezingqongileyo ④ Musa ukusebenzisa i-PLC kwindawo yokungcangcazela ngokuthe ngqo ⑤ Ngaphandle kwabasebenzi benkonzo yeengcali, musa ukuqhawula ukulungiswa, okanye ukuguqula imveliso ⑥ Sebenzisa i-PLC kwindawo ehambelana neenkcukacha ngokubanzi eziqulethwe kule datha. ⑦ Qinisekisa ukuba umthwalo wangaphandle awudluli umlinganiselo wemodyuli yokuphuma. ⑧ Xa ulahla i-PLC kunye nebhetri, yiphathe njengenkunkuma yamashishini. ⑨ Umqondiso we-I/O okanye umgca wonxibelelwano uya kutsalelwa intambo ubuncinci be-100mm kude ne-high-voltagIntambo ye-e okanye intambo yombane.

Indawo yokusebenza

• Ukufakela, jonga le miqathango ingezantsi.

Hayi	Into	Inkcazo					Umgangatho
1	Ithuba elikwiNdawo.	0 ~ 55℃					–
2	Ubushushu bokugcina.	-25 ~ 70℃					–
3	Ukufuma kwendawo	I-5 ~ 95%RH, i-non-condensing					–
4	Ukugcinwa kokufuma	I-5 ~ 95%RH, i-non-condensing					–
5	Ukunyangwa kweVibration	Ukungcangcazela ngamaxesha athile				–	–
		Ukuphindaphinda	Ukukhawulezisa				IEC 61131-2
		5≤f<8.4㎐	–		3.5mm	Amaxesha ali-10 kwicala ngalinye ngenxa X AND Z
		8.4≤f≤150㎐	9.8㎨(1g)		–
		Ukungcangcazela okuqhubekayo
		Ukuphindaphinda	Ukuphindaphinda	Ukuphindaphinda
		5≤f<8.4㎐	–	1.75mm
		8.4≤f≤150㎐	4.9㎨(0.5g)	–

Izixhobo kunye neNgcaciso zeCable

• Jonga i-DeviceNet Connector eqhotyoshelwe kwimodyuli
• Xa usebenzisa ijelo lonxibelelwano lweDeviceNet, intambo yeDeviceNet iya kusetyenziswa ngokuqwalasela umgama wonxibelelwano kunye nesantya.

Ukuhlelwa	Engqindilili(iklasi1)	Engqindilili(iklasi2)	Mncinci(iklasi2)	Phawula
Uhlobo	7897A	3082A	3084A	Menzi: Belden
Uhlobo lweCable	Umjikelo			Imigca yetrunk kunye neDrop isetyenziswa ngaxeshanye
Ukuphazamiseka (Ω)	120
Uluhlu lobushushu(℃)	-20~75
Max. yangoku evumelekileyo(A)	8		2.4
Min. iradiyasi yegophe(intshi)	4.4	4.6	2.75
Inombolo yocingo olungundoqo	5ingcingo

Ubungakanani

Ubungakanani (mm)

• Le nxalenye yangaphambili yemveliso. Jonga igama ngalinye xa usebenzisa inkqubo. Ngolwazi oluthe vetshe, jonga kwincwadi yomsebenzisi.

Iinkcukacha ze-LED

Igama	Inkcazo
Pwr	Ibonisa ubume bamandla
MS	Ibonisa ubume bojongano lwemodyuli yonxibelelwano
NS	Ibonisa ubume bothungelwano lwemodyuli yonxibelelwano

Iinkcukacha Zokusebenza

• Le yimigaqo yokusebenza yemveliso. Bhekisela kwigama ngalinye xa uqhuba inkqubo. Ngolwazi oluthe vetshe, jonga kwincwadi yomsebenzisi.

Into	GDL-D2xC	I-GDL-DT4C/C1	I-GDL-TRC/C1	I-GDL-RY2C
INgeniso ekalisiweyo yangoku	5mA		–	–
Umthamo olinganisiweyo womthamotage	–	DC24V		DC24V/AC220V, 2A/Point, 5A/COM
Umthwalo omkhulu	–	0.5A/Point, 3A/COM		I-DC 110V, i-AC 250V 1,200 amaxesha / iyure
ON Voltage	I-DC 19V okanye ngaphezulu			Umthamo omncinci womthamotage/yangoku DC 5V/1mA
OFF Voltage	I-DC 6V okanye ngaphantsi

UYilo lweBhlokhi yetheminali ye-I/O Wiring

• Olu lubeko lwebhloko yeterminal ye-I/O yocingo.
• Bhekisela kwigama ngalinye xa uqhuba inkqubo.
• Ngolwazi oluthe vetshe, jonga kwincwadi yomsebenzisi.

Iintambo

Iingcingo zoNxibelelwano

1. Izikhonkwane ezi-5 (zoqhagamshelwano lwangaphandle)
   

   Umqondiso	l Umbala	Inkonzo	5 isiqhagamshelanisi sephini
   I-DC 24V	(+) Bubomvu	VDC
   UNGA_	H White	Umqondiso
   Khupha amanzi	Bare	Ikhaka
   UNGA_	L Blue	Umqondiso
   I-DC 24V	(-) Mnyama	GND

2. Ngolwazi oluthe kratya lweingcingo, jonga kwincwadi yomsebenzisi.

Iwaranti

• Ixesha lewaranti ziinyanga ezingama-36 ukusuka kumhla wokwenziwa.
• Ukuxilongwa kokuqala kweempazamo kufuneka kuqhutywe ngumsebenzisi. Nangona kunjalo, ngesicelo, i-LS ELECTRIC okanye abameli bayo banokuwenza lo msebenzi ngentlawulo. Ukuba unobangela wesiphoso ufunyaniswa uxanduva lwe-LS ELECTRIC, le nkonzo iya kuba simahla.
• Ukukhutshwa kwiwaranti
  • 1) Ukutshintshwa kwezinto ezisetyenziswayo nezinomlinganiselo wobomi (umz. iireyiyi, iifuse, iicapacitor, iibhetri, iiLCDs, njl.njl.)
  • 2) Ukungaphumeleli okanye umonakalo obangelwa iimeko ezingafanelekanga okanye ukuphatha ngaphandle kwezo zichazwe kwincwadi yomsebenzisi
  • 3) Ukungaphumeleli okubangelwa yimiba yangaphandle engahambelani nemveliso
  • 4) Ukungaphumeleli okubangelwa ukuguqulwa ngaphandle kwemvume ye-LS ELECTRIC
  • 5) Ukusetyenziswa kwemveliso ngeendlela ebezingalindelekanga
  • I-6) Ukungaphumeleli okungenakuqikelelwa / ukusonjululwa ngobuchwephesha besayensi yangoku ngexesha lokwenziwa
  • 7) Ukusilela ngenxa yezinto zangaphandle ezifana nomlilo, umthamo ongaqhelekangatage, okanye iintlekele zendalo
  • 8) Ezinye iimeko apho i-LS ELECTRIC ayinaxanduva
• Ngolwazi oluneenkcukacha lwewaranti, nceda ujonge kwincwadana yomsebenzisi.
• Umxholo wesikhokelo sokufakela unokutshintsha ngaphandle kwesaziso sokuphucula ukusebenza kwemveliso.

QHAGAMSHELANA

• I-LS ELECTRIC Co., Ltd. www.ls-electric.com 10310000309 V4.5 (2024.6)
• I-imeyile: automation@ls-electric.com
• Ikomkhulu/Seoul Office Umnxeba: 82-2-2034-4033,4888,4703
• LS ELECTRIC Shanghai Office (China) Umnxeba: 86-21-5237-9977
• I-LS ELECTRIC (Wuxi) Co., Ltd. (Wuxi, China) Umnxeba: 86-510-6851-6666
• I-LS-ELECTRIC Vietnam Co., Ltd. (Hanoi, Vietnam) Umnxeba: 84-93-631-4099
• I-LS ELECTRIC Middle East FZE (Dubai, UAE) Umnxeba: 971-4-886-5360
• I-LS ELECTRIC Europe BV (Hoofddorf, Netherlands) Umnxeba: 31-20-654-1424
• I-LS ELECTRIC Japan Co., Ltd. (eTokyo, eJapan) Umnxeba: 81-3-6268-8241
• LS ELECTRIC America Inc. (Chicago, USA) Umnxeba: 1-800-891-2941
• Umzi-mveliso: 56, Samseong 4-gil, Mokcheon-eup, Dongnam-gu, Cheonan-si, Chungcheongnamdo, 31226, Korea

Amaxwebhu / Izibonelelo

LS GDL-D22C Programmable Logic Controller [pdf] Isikhokelo soFakelo D24C, DT4C-C1, GDL-TR2C-C1, TR4C-C1, RY2C, GDL-D22C Programmable Logic Controller, GDL-D22C, Programmable Logic Controller, Logic Controller, Controller

Iimbekiselo

• Incwadi yokusebenzisa