C2 Cordless Robotic Pool Cleaner
“
Specifications:
- Product Model: WYBOT C2
- Charging Time: Fully charged before first use
- Cleaning Mode: Default mode is wall then floor, customizable
via the App - Filter: Ultra-fine filter for trapping fine dirty
particles - Maintenance: Clean filter after each use, charge device at
least every 3 months
Product Usage Instructions:
Step 1 – Charge the robot:
- Unscrew the protective cap and ensure the charging port is
dry. - Fully charge your device before first use.
- Insert the charger cable into the device, keeping the cleaner
at least 3m away from the pool.
Step 2 – Start the robot:
- Screw the protective cap back on.
- Press the on/off button. The LED will turn solid green to
indicate battery level and then blue to show it’s on. - Promptly put the device into the pool within 3 minutes;
otherwise, it will power off. - The default cleaning mode is wall then floor.
Step 3 – Set up cleaning mode:
- Download the WYBOT app and set your cleaning mode in
advance. - Register your account following the app’s directions.
- Bind your device as per app instructions.
- Enable your mobile phone’s Bluetooth and keep the device within
Bluetooth range. - Customize your cleaning mode through the app.
Frequently Asked Questions (FAQ):
Q: How often should I clean the filter?
A: You should clean the filter after each use to maintain
optimal pool cleaning performance.
Q: What is the purpose of the ultra-fine filter?
A: The ultra-fine filter helps trap fine dirty particles. It is
recommended to use it in ‘turbo floor mode’ only and avoid
installing it when the floor is heavily soiled.
“`
QUICK START GUIDE
Step 1 – Charge the robot
1
3
Fully Charged
Unscrew protective cap, and ensure charging port dry
2
Fully charge your device before first use.
3m (9.8ft)
Insert charger cable into the device, and keep your cleaner at least 3m away from the pool.
Emailsupport@wybotpool.com
Facebook: @WybotPool
Website: www.wybotpool.com
Step 2 – Start the robot
4
5
Screw protective cap back.
Press on/off button, and the LED turns solid green to indicate current battery level and then blue to show it is on.
Put the device into the pool within 3 min., otherwise, it will power off.
The default cleaning mode is wall then floor.
WYBOT C2
Step 3 – Set up cleaning mode
6
7
WYBOT
Please download WYBOT and set your cleaning mode in advance.
Register your account as per the App direction.
Bind your device as per App direction.
Enable your mobile phone Bluetooth.
Keep your device out of water and within the range of Bluetooth.
Customize your cleaning mode via the App.
QUICK START GUIDE
Step 4 – Run the robot
8
9
Step 5 – Removal from the pool
10
11
12
Submerge the device into the pool gently.
Wait for the device autocalibration for 20 seconds.
LED turns flashing blue and start to clean.
Emailsupport@wybotpool.com
Facebook: @WybotPool
Website: www.wybotpool.com
Auto park by the wall when completing cleaning.
Insert the included hook into a standard pool pole.
Hook it out of the pool.
WYBOT C2
Step 6 – Clean and store
13
14
a
b
c
d
You should clean the filter after use. Insufficient cleaning may influence pool cleaning effect.
The ultra-fine filter is an auxiliary filter to help trap the fine dirty particles. Recommend to use it in `turbo floor mode’ only. Please do not install it when the floor is heavily soiled, it may influence the operation of the cleaner.
Store the cleaner in a ventilated place and keep it out of direct sunlight or inclement weather.
Charge the device at least every 3 months to maintain battery performance during the offseason.
Documents / Resources
 |
WYBOT C2 Cordless Robotic Pool Cleaner [pdf] User Guide C2, C2 Cordless Robotic Pool Cleaner, C2, Cordless Robotic Pool Cleaner, Robotic Pool Cleaner, Pool Cleaner, Cleaner |