WooLINK E27 Bulb Camera User Guide

WooLINK logoWooLINK E27 Bulb Camera User Guide

WooLINK E27 Bulb Camera image

WooLINK E27 Bulb Camera User Guide

Download Yi IoT app

Scan QR code belowWooLINK E27 Bulb Camera fig1

download the app from app storeWooLINK E27 Bulb Camera fig2

Search and download the Yi IoT app in Google playWooLINK E27 Bulb Camera fig3

Sign up and log in

WooLINK E27 Bulb Camera fig4

How to add cameraWooLINK E27 Bulb Camera fig5

How to connected with Wi-fi

Please select WiFi connection,WooLINK E27 Bulb Camera fig6WooLINK E27 Bulb Camera fig7 If you don’t hear the sequence, please press the “RESET” on the device. Continue for more than 5 seconds, until you heard the sequence, that means the reset is successful.WooLINK E27 Bulb Camera fig9

Note:

  1. 5GHz wireless band is not supported;
  2. Please turn on location of phone

WooLINK E27 Bulb Camera fig10The QR code that appears on the mobile phone is scanned against the camera lens, and the device emits a prompt sound “connecting wifi” and then tick i heard waiting to connect, click next until you heard “WiFi is connected”, and wait for the network configuration to be completed.WooLINK E27 Bulb Camera fig11

How to use app

WooLINK E27 Bulb Camera fig12 WooLINK E27 Bulb Camera fig13 WooLINK E27 Bulb Camera fig14

Cloud storage

WooLINK E27 Bulb Camera fig15

Common problem

Q: The camera is offline

  1. Check if the power supply is working properly
  2. Power off and restart the device to reconnect to the network
  3. The signal coverage is weak
  4. Signal interference shielding in special places

Q: How does the camera store video

  1. The camera supports the F32 format with a maximum capacity of 64G. After the card is recognized, it automatically records, and when the storage is full, it automatically overwrites the original recording and loops recording;
  2. Support opening cloud storage service to store video;

Special statement:

The product is subject to the actual product, the instruction manual is for reference only
Mobile phone app and device firmware version support update, users can upgrade through the app.
Do not install the product in a place where it is damp, dusty, high temperature, flammable or explosive and out of reach of children.

FAQS

Is this an outdoor camera and could withstand sun and cold?

the camera not waterproof ,could withstand sun and cold

Does this have an actual light in it?

This bulb camera has infrared light, no floodlight

Will it substitute for porch light always on?

no it will not. but you have a built in camera. with additions]al security and peace of mind. It moves around too.

Does this act as a light as well? If not what do you use for the porch light?

It does not have a light on it. Also you have to put an SD card in it. 

Do you have to pay for a subscription to use this device?

No you do not. No light for porch.

What is the warranty?

Lifetime technical support

Why can’t I connect to my WiFi router?

Make sure that you have entered correct password of your WiFi router correctly into app settings of Yi Home App; Make sure that you have connected with correct WiFi name of your WiFi router into app settings of Yi Home App; Make sure that you have turned on WiFi function of Yi Home App; Make sure that you have turned on WiFi function of Yi Home Camera; Turn off all devices in your house which use 2.4GHz frequency band (e.g., microwave ovens) for 5 minutes; Turn off all devices in your house which use 5GHz frequency band (e.g., smart phones) for 5 minutes; Reset Yi Home Camera by pressing “RESET” button with a pin or paper clip; Check whether other devices in your house can access Internet via this WiFi router normally (e.g., smart phones); Check whether other devices in your house can access Internet via this WiFi router normally (e.g., smart phones); Turn off all devices in your house which use 2.4GHz frequency band

is this an outdoor camera and can you zoom?

Yes it is for outdoor and it can zoom aslo

Can you pan and tilt this camera remotely?

Yes, This light bulb camera support pan and tilt

Does this camera work with just a SD card?

NO, This wireless WiFi bulb camera Support for SD Card and Cloud storage

is this waterproof?

NO.

Does it connect to ring?

Yes

Will it work with the Tuya app?

NO, It only support “HoMeYe” App

When motion is detected, is there a light that comes on?

NO, the light will not comes on,this bulb camera only has infrared light

Can you record continuously to SD card?

Yes,the wireless WiFi bulb camera support record continuously to SD Card

Stupid question, but does the bulb actually light up?!

NO, This Bulb Camera Only infrared night vision, no light up

Stupid question, but does the bulb actually light up?!

No it will just turn on camera on
It doesn’t light up like a regular light bulb.

VIDEO

WooLINK logowoolinktech

Documents / Resources

PDF thumbnailE27 Bulb Camera
User Guide · E27, Bulb Camera

References

Questions and answers

Helpful product questions tied to this manual. Each item links to the full Q&A page.

Browse all questions about this manual

Questions & Answers

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

  1. Wool ink 3 mp bulb camera. It was easy to install but the picture on my phone is upside down – how do I correct it.
    Thanks

    Lmore asks Wool ink 3 mp bulb camera. It was easy to install but the picture on my phone is upside down - how do I correct it.
    Thanks
    Manuals+ clarified question
    Question

    How do I rotate the image on my WooLINK 3MP bulb camera if it is upside down?

    Answer

    To correct an upside-down image on your WooLINK E27 Bulb Camera, you will need to adjust the image rotation settings within the Yi IoT app (or the HOMEEYE PRO app, depending on which version you are using).

    • Open the app and select your camera to view the live feed.
    • Tap on the Camera Setting icon (usually a gear icon in the top right corner).
    • Look for an option labeled Image Rotation, Flip Image, or 180° Rotation.
    • Toggle this setting to flip the video feed to the correct orientation.

    If you cannot find the setting, ensure your app is updated to the latest version, as firmware and app updates are supported to improve user experience.

  2. Why does the camera always rotate facing the wall.

    Kenneth Linn asks Why does the camera always rotate facing the wall.
    Manuals+ clarified question
    Question

    Why does the camera always rotate to face the wall?

    Answer

    If your WooLINK E27 Bulb Camera is rotating to face the wall, it is likely due to the Motion Tracking feature or an incorrect Preset/Default position setting.

    • Check Motion Tracking: If this feature is enabled, the camera will follow any movement it detects. If it detects movement (or a reflection) near the wall, it will rotate and stay there until it detects new movement. You can toggle this in the Camera Settings within the Yi IoT app.
    • Calibrate PTZ: Use the PTZ control wheel in the app (shown on page 10 of the manual) to manually rotate the camera to your desired center view. Some models allow you to set a 'Default' or 'Home' position in the settings so it returns to that spot after tracking.
    • Check for Obstructions: Ensure there are no objects or light reflections very close to the lens that might be triggering the motion sensors to pull the camera toward the wall.
    • Reset the Device: If the rotation seems erratic or stuck, perform a reset by pressing the RESET button on the back of the camera (near the SD card slot) for more than 5 seconds until you hear a sequence, then re-pair the camera.

    If the issue persists, you can contact WooLINK support at 800-485-2154 or email woolink-us@outlook.com.

  3. Enjoying the camera, video, night vision! great unit ! NEED USER GUIDE.
    ON LINE.FINW.

    Tom bleecher asks Enjoying the camera, video, night vision! great unit ! NEED USER GUIDE.
    ON LINE.FINW.
    Manuals+ clarified question
    Question

    Where can I find the online user guide for the WooLINK E27 Bulb Camera?

    Answer

    You can find the online guide for your WooLINK E27 Bulb Camera directly on the page where you posted your comment. For your convenience, here is a summary of the essential setup steps and contact information:

    • App Download: Search for and download the Yi IoT app from the Apple App Store or Google Play Store.
    • WiFi Setup: Open the app, select "WiFi connection," and follow the prompts. Note that the camera only supports 2.4GHz WiFi (5GHz is not supported).
    • Pairing: When the app generates a QR code, hold your phone screen in front of the camera lens until you hear "connecting wifi" and then "WiFi is connected."
    • Resetting: If you have trouble connecting, press and hold the RESET button on the device for more than 5 seconds until you hear a sequence tone.
    • Storage: The camera supports MicroSD cards (FAT32 format) up to 64GB for local recording.

    If you need further assistance, you can contact WooLINK Customer Support at 800-485-2154 (8 AM - 5 PM PST) or via email at woolink-us@outlook.com.

  4. can I add more than one E27 bulb camera on the app? if so, what are the steps?

    Abdella asks can I add more than one E27 bulb camera on the app? if so, what are the steps?
    Manuals+ clarified question
    Question

    Can I add more than one E27 bulb camera to the app, and what are the steps?

    Answer

    Yes, you can add multiple cameras to the app. The Yi IoT app is designed to manage multiple devices, which will appear in a list on your main "Welcome" screen.

    To add an additional camera, follow these steps:

    1. Open the Yi IoT app on your mobile device.
    2. On the main screen (Welcome screen), click the "+" (add) button located in the top right corner.
    3. Select WiFi connection as the choice mode.
    4. Ensure the new camera is powered on. If you do not hear a two-tone sequence, press and hold the RESET button on the device for more than 5 seconds.
    5. Enter your WiFi name and password (note: 5GHz WiFi is not supported; use 2.4GHz).
    6. A QR code will appear on your phone screen. Face your phone's screen toward the camera lens until you hear the prompt "connecting wifi".
    7. Wait for the app to confirm "WiFi is connected" and "Pairing successful".
    8. Name your new camera (e.g., "Kitchen" or "Garden") and click Save.

    Once added, you can switch between your different cameras directly from the home screen of the app.

  5. Gostaria de saber se é possível acessar pela internet móvel. Se sim, como é feito?

    Alessandra asks Gostaria de saber se é possível acessar pela internet móvel. Se sim, como é feito?
    Manuals+ clarified question
    Question

    Is it possible to access the WooLINK E27 Bulb Camera via mobile internet, and if so, how?

    Answer

    Yes, it is possible to access your WooLINK E27 Bulb Camera via mobile internet (4G/5G) once the initial setup is complete. The camera is designed for remote access, allowing you to view live feeds and recordings from anywhere.

    How to enable remote access:

    1. Initial Setup: You must first connect the camera to a 2.4GHz Wi-Fi network at the location where it is installed using the Yi IoT app (or HOMEEYE PRO depending on your specific model version).
    2. App Configuration: Follow the in-app instructions to pair the camera by scanning the QR code displayed on your phone with the camera lens.
    3. Remote Viewing: Once the camera is successfully paired and "Online" in the app, you can switch your smartphone from Wi-Fi to mobile data. The app will use the internet to communicate with the camera via the cloud, allowing you to see the video feed regardless of your location.

    Note: Ensure your mobile device has a stable internet connection and that the camera remains powered on and connected to its local Wi-Fi network.

  6. it dint come with a password what can I do?????

    Jorge asks it dint come with a password what can I do?????
    Manuals+ clarified question
    Question

    How do I find or set the password for my WooLINK E27 Bulb Camera?

    Answer

    The WooLINK E27 Bulb Camera does not typically come with a pre-set password. Instead, you create your own account and password during the initial setup process using the Yi IoT app (or HOMEEYE PRO depending on your specific model version).

    Follow these steps to set up your camera and password:

    1. Download the App: Search for and download the Yi IoT app from the Google Play Store or Apple App Store.
    2. Sign Up: Open the app and select "Sign up" to create a new account. You will be asked to enter your email and create a new password for your account.
    3. Connect to WiFi: Follow the in-app instructions to add your camera. You will need to enter your home WiFi password to connect the camera to your network. Note that the camera only supports 2.4GHz WiFi bands.
    4. Reset if Needed: If you are being prompted for a device password you don't know, or if the camera was previously used, press and hold the RESET button on the device for more than 5 seconds until you hear a sequence sound. This will restore the camera to factory settings, allowing you to set it up as new.

    If you continue to have trouble, you can contact WooLINK customer support at 800-485-2154 (8 AM - 5 PM PST) or email woolink-us@outlook.com.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.