Woods 2001 Mechanical Light Sensor Timer

INTRODUCTION

Anyone who wants to control outdoor lights or appliances should get the Woods 2001 Mechanical Light Sensor Timer. It’s a reliable and cheap option. This device, which costs $9.79, is a great deal for automatically controlling lights, which makes it perfect for homes, gardening, or security lighting. It was made by Woods Industries and has a built-in light monitor and 24-hour timer to make sure it uses little energy. Launched in 2017, this timer helps people save electricity and make their lights last longer. It can handle up to 1875 watts of power and has 7 sets, so it can be used in a variety of ways. The Woods 2001 is a useful addition to your home control tools, whether you need it for everyday lighting or to make your home safer at night.

SPECIFICATIONS

Brand	Woods
Price	$9.79
Item Dimensions (L x W x H)	3 x 1.5 x 6 inches
International Protection Rating	IP00
Number of Positions	7
Controller Type	Remote Control
Connectivity Protocol	X-10
Wattage	1875 Watts
Manufacturer	Woods Industries
Item Weight	4.8 ounces
Item Model Number	2001
Style	24-Hour with Light Sensor
Power Source	Corded Electric
Voltage	120 Volts
Operation Mode	ON-OFF
Current Rating	8.3 Amps
Operating Voltage	125 Volts
Connector Type	Plug In

WHAT’S IN THE BOX

• Mechanical Light Sensor Timer
• User Manual

FEATURES

• Photocell Light Sensor: The built-in photocell sensor checks the amount of light outside and instantly turns the lights on at dusk and off at dawn.
• Design That Saves Energy: The timer saves you money and energy by turning your outdoor lights or appliances on and off automatically at times you set.
• Adjustable Timing Modes: The timer can be set to run from dusk until dawn or for 2, 4, 6, or 8-hour intervals, so it can be used for a variety of tasks.
• User-Friendly Dial: The timer has a simple dial that you can twist to set the time you want it to run for. This makes it easy to program.
• Waterproof Design: The outdoor timer is made to be resistant to water and weather, so you can use it all year, even when it’s raining or snowing.
• Compatible with 3-wire Plugs: The timer works with 3-wire plugs, so it can be used with many outdoor devices, such as lights and small ponds.
• Flexible Use: This timer works well with patio lights, rope lights, fans, small fountains, and a lot of other electrical items.
• The Woods 2001 model has a mechanical timer that works reliably and is easy to use since it doesn’t need batteries or complicated settings.
• Heavy-Duty Power Rating: It can handle up to 1875 watts of power and up to 8.3 amps, which is enough for most typical home and outdoor devices.
• Simple Daily Repetition: Once you set the timer, it will repeat the settings you chose every day, so you don’t have to change them every day.
• Portable: The timer is small and light (only 4.8 ounces), so it’s simple to move or put away when not in use.
• Outdoor Timer with Many Uses: This timer is made to be used outside and can reliably control yard decorations, Christmas lights, or garden lights.
• 6-Inch Cord: The timer comes with a 6-inch cord that makes it easy to put it in a number of outdoor locations.
• 120V Power Supply: The timer works with 120 volts, so it can be plugged into most normal wall outlets.

SETUP GUIDE

• Plug in the Timer: Outside, plug the timer into a normal 120V outlet. For the best results, make sure the area is dry and out of the way of bad weather.
• Connect Devices: Plug your outdoor lights or tools into the outlet on the timer. Make sure the devices can handle the 8.3-amp highest rating of the timer.
• Start the Timer: Turn the timer’s dial to set the time you want it to run (for example, from dusk to dawn, 2, 4, 6, or 8 hours).
• Use the photocell feature: Make sure the sensor is facing natural light so it can turn on by itself when it gets dark outside.
• Change the time: You can choose the time mode (2, 4, 6, or 8 hours) to change how long the lights or devices will stay on.
• Set to Repeat: Once set, the timer will repeat its settings every day at the same time, so it will work automatically without any further changes.
• Position for Best Results: Put the timer somewhere where the photocell sensor can get light from the outside world, making sure it works right.
• Check Device Compatibility: To avoid overloading, make sure that the devices that are connected do not use more than 8.3 amps (1875 watts), which is the timer’s highest rating.
• Use with Outdoor ornaments: This timer works great with outdoor lights like garden lights, holiday ornaments, and small fountains.
• Test Before Use: Make sure the timer works as expected by turning on and off any outdoor lights or devices before letting it to work on its own.
• Safe Outdoor Setup: If you’re using the timer outside, make sure you put it somewhere safe and out of the way so that water or physical impacts don’t damage it by mistake.
• Changes in the Seasons: If the seasons change, change the timer settings to reflect how long you want your devices or lights to stay on at night.
• Use Timer Indoors: As long as the electrical load isn’t too high, the timer can also be used indoors to control Christmas lights or other small appliances.
• Avoid Overloading: To keep the timer from breaking or getting damaged, make sure that the total load tied to it does not go over the wattage that was given.
• Plug in More Devices: You can add more power strips to the timer’s outlet if you need to handle more devices, but be careful not to overload it.

CARE & MAINTENANCE

• Check for Damage: If you use the timer outside in rough weather, check it often for any obvious signs of wear or damage.
• Clean the Timer: Use a soft cloth to wipe the timer clean so that it stays clean. Do not use rough cleaners that could hurt the surface.
• Also, make sure that the photocell sensor is clear of any dirt or objects that might be in the way of it working properly.
• Store Inside: If you’re not going to be using the timer for a long time, keep it inside to protect it from bad weather, especially freezing temps.
• Test the Timer Often: Make sure the timer is working right every so often, especially after power outages or when the seasons change.
• Replace If Not Working Right: If the timer stops working right, you might want to replace it to keep it working right.
• Do Not Overload: Do not use more than 8.3 amps (1875 watts), as this could damage the timer or put people in danger.
• Safe Cord Management: Make sure the cord isn’t broken or twisted, as this could cause an electrical short or failure.
• Make sure the timer is never wet. This is especially important if you use it outside so that it doesn’t get electricity problems or rust.
• Replace Timer Parts: If the timer’s cord or plug gets worn out or broken, it needs to be replaced to make sure it works safely.
• Keep the timer away from places with a lot of foot traffic to keep it from getting hit or dropped by accident.
• Check Timer Settings: If your timer doesn’t work at the right times, make sure that the settings are still correct.
• Dry Before Storing: If the timer has been outside, make sure it is dry before putting it away inside.
• Use the Right Outlet: To make sure it’s safe to use, only plug the timer into an outlet that fits its voltage and amperage requirements.
• Replace the Battery in the Remote: If the model comes with a remote, make sure to replace the battery in it on a regular basis to make sure it works well.

TROUBLESHOOTING

Issue	Solution
Timer not working	Check if the unit is properly plugged in and receiving power.
Light sensor not activating	Ensure the sensor is not covered and is exposed to light.
Timer settings not holding	Verify the settings are correctly programmed and check for power outages.
Timer clicks but light does not turn on	Ensure the connected load does not exceed the wattage limit.
Timer’s display is flickering	Try resetting the timer by turning it off and on again.
Timer is not turning off at the set time	Re-check the time settings and adjust the dial properly.
Timer’s plug is too loose	Inspect the plug and ensure it is firmly inserted into the outlet.
Timer not responding to the remote	Check for obstructions or interference between the remote and the timer.
Timer is tripping circuit breaker	Reduce the wattage load or check for faulty wiring.
Timer emits a faint noise	This is normal for mechanical timers due to the internal motor.

PROS & CONS

Pros:

• Easy to set up and operate with a user-friendly interface.
• Built-in light sensor automatically controls lights based on ambient light levels.
• Energy-efficient and reduces electricity costs.
• Durable and compact, making it easy to install in small spaces.
• Affordable pricing for excellent functionality.

Cons:

• Limited to 120V voltage, which might not be suitable for all applications.
• The light sensor may not work optimally in areas with fluctuating lighting conditions.
• Not compatible with dimmable or smart bulbs.
• Lacks more advanced scheduling features available in digital timers.
• No backup battery, meaning settings could be lost in case of a power outage.

WARRANTY

The Woods 2001 Mechanical Light Sensor Timer comes with a 1-year limited warranty, ensuring its reliability and durability under normal usage. The warranty covers defects in material and workmanship. It does not cover damage caused by misuse, improper installation, or weather-related conditions.

FREQUENTLY ASKED QUESTIONS

What is the price of the Woods 2001 Mechanical Light Sensor Timer?

The Woods 2001 Mechanical Light Sensor Timer is priced at $9.79, offering an affordable solution for managing lighting schedules with automatic light sensing capabilities.

What are the dimensions of the Woods 2001 Mechanical Light Sensor Timer?

The Woods 2001 Mechanical Light Sensor Timer measures 3 x 1.5 x 6 inches, making it compact and suitable for use in a variety of household or commercial environments.

What is the International Protection (IP) rating of the Woods 2001 Timer?

The Woods 2001 Mechanical Light Sensor Timer has an IP00 rating, meaning it is not rated for protection against dust or water, so it's best used in dry, indoor environments.

How many positions are available on the Woods 2001 Mechanical Light Sensor Timer?

The Woods 2001 Mechanical Light Sensor Timer has 7 positions, which allows for flexible scheduling and control of connected devices over a 24-hour period.

What type of controller does the Woods 2001 Timer use?

The Woods 2001 Mechanical Light Sensor Timer uses a remote control for easy adjustments, providing convenient operation without needing to manually change settings.

What connectivity protocol does the Woods 2001 Timer support?

The Woods 2001 Mechanical Light Sensor Timer operates using the X-10 connectivity protocol, allowing it to communicate with compatible devices for remote control.

What is the maximum wattage supported by the Woods 2001 Timer?

The Woods 2001 Mechanical Light Sensor Timer supports a maximum wattage of 1875 watts, making it suitable for use with most household electrical appliances and lighting systems.

What voltage does the Woods 2001 Mechanical Light Sensor Timer operate at?

The Woods 2001 Mechanical Light Sensor Timer operates at 120 volts, which is standard for most household appliances and lighting systems in North America.

References

• User Manual