WONDOM - logo

Mid-Power Multichannel Series
6 x 100 Watt 6 Ohm
Class D
Audio Amplifier Board – TDA7498
(AA-AB34181)

WONDOM AA AB34181 Class D Audio Amplifier Board - cover

Key Features:

  • Output Power
    100W@6Ohm 36V DC THD+N 10%
    70W@6Ohm 36V DC THD+N 1%
  • Work·ing Indicator
  • Temperature Control Fan
  • Overcurrent Protection
  • Overtemperature Protection
  • Optimized Heatsink Design
  • 4-screw Easy Installation
  • Weight: 610g/1.34 lbs (±10%)
  • Size: 6.00 x 4.50 x 1.53 inches

All these boards are per-tested with our power supply solution to comply with FCC and CE. For all customers who need those information, please contact our distributor or Sure Electronics. RoHS compliant will need an MOQ of 1000pcs per order.

Ready for:

WONDOM AA AB34181 Class D Audio Amplifier Board - icon

Contact info
·Email: info@sure-electronics.com

Electrical Specifications

Specifications typical @ +25℃, powered by 36V DC, unless otherwise noted. Specifications subject to change without notice.

Parameter  Conditions  Min. Typ.  Max.  Units
Power Supply 14 36 VDC
Idle Power SD Floating, FAN ON 6. 10 W
SD Floating, FAN OFF 4. 7 W
Standby Power SD Connected to GND, FAN OFF 3. 5 W
Maximum Current 600W @ 6Ohm 18. A
Efficiency 100W @ 6Ohm 90 95 %
Minimum Load Impedance 6 0
Switching Frequency SD Floating 350 KHz
Fan Active @ Temperature 50 °C

Audio Performance

Specifications typical @ +25℃, powered by 36V DC, unless otherwise noted. Specifications subject to change without notice.

Parameter Conditions Min. Typ. Max. Units
Gain 24 25 26 dB
Input Sensitivity(RMS) @ 6 Ohm, 100W, 1Khz 1. V
Input Impedance 33 KG
Output Power @ 6 Ohm, THD+N 1% 70 W
@ 6 Ohm, THD+N 10% 100 W
Bandwidth @ ±3dB @ 6 Ohm 20 20K Hz
THD @ 6 Ohm, 1W, 1Khz 0.053 %
@ 6 Ohm, 10W, 1Khz 0.0938 %
Output Noise Level A-weighting, Input Connected to GND 270. pV
SNR 70W @ 6 Ohm, THD+N 1% 94A dB

Typical Performance Graphs

WONDOM AA AB34181 Class D Audio Amplifier Board - Typical Performance Graphs

All parameters were tested with Rohde & Schwarz UPV audio analyzer (AES17 filter enabled) and Audio Precision AUX0025 filter. For authorized distributors and OEM customers who need more detailed performance graphs and parameter settings, please send an inquiry e-mail to us. (Not available for retail customers)

Model Selection Guide

Model Number  Output Power Power Supply
Range
Typical
Load
Amplifier IC Dimensions
AA-AB33312 2 X 200Watt
+1 X 400Watt
DC 15-46V 30 T-AMP 6″X4.5″0
AA-AB33511 2 X 300Watt
+1 X 500Watt
DC 24-50V 30 T-AMP 6″X4.5″
AA-AB35281 3 X 200Watt DC 24-36V 30 T-AMP 6″X4.5″
AA-AB35191 3 X 300Watt DC 24-40V 30 T-AMP 6″X4.5″
AA-AB35311 3 X 400Watt DC 24-46V 30 T-AMP 6″X4.5″
AA-AB35511 3 X 500Watt DC 24-50V 30 T-AMP 6″X4.5″
AA-AB33184 4 X 100Watt DC 14V-36V 60 TDA7498 6″X4.5″
AA-AB34181 6 X 100Watt DC 14V-36V 60 TDA7498 6″X4.5″

Notes:

  1. The output power is rated at the condition THD+N 10%,1kHz sine wave.
  2. All amplifier boards don’t employ power supply reverse polarity protection. Stresses beyond the power supply range maximum ratings may cause permanent damage.
  3. None typical load may cause rating power reduction.
  4. Dimensions mean length and width of PCB only, excluding excessive part out of the PCB outline.
  5. All parameters were tested with Rohde & Schwarz UPV audio analyzer (AES17 filter enabled) and AP AUX0025 filter. Linear Power Supply units were used for testing.
  6. Sure Electronics promises all standard products life cycle more than 5 years. Sure Electronics reserves the right to update the version without notice. All the products sent to retail customers are the latest version. We will provide back-to-order service (100 Pieces MOQ needed) for our distributors in 5 years.
  7. Suggested power supply solution: Mean Well MW 36V 16.6A 600W AC/DC Switching Power Supply SE-600-36 UL/CUL(PS-SP11189)
    If you have other power supply requirements, please feel free to contact us.

Mechanical Dimensions

WONDOM AA AB34181 Class D Audio Amplifier Board - Typical Performance Graphs 3

Connections

WONDOM AA AB34181 Class D Audio Amplifier Board - Connections

Dimensions  A (inch/mm)  A1 (inch/mm)  B (inch/mm)  B1 (inch/mm)  D (inch/mm) 
#1 6.00/152.40 5.60/142.24 4.50/114.3 4.10/104.14 0.14/3.60

Notes:

  • All dimensions are typical in inches/mm
  • Tolerance x.xx = ±0.02(±0.50)
    Height:
    AA-AB33184, AA-AB34181, AA-AB33182: 1.30inch(33.02mm)
    Others: 1.48inch(37.60mm)

Power Supply Connector:

  • J12 DC Jack 5.5mm/2.5mm
  • J13 Terminal Block RJ128 (optional)
Pin  Function 
GND
VCC

Audio Input Connector:

  •  J6, J7, J8, J9, J10, J11 RCA Jack
  • J1, J2, J3, J4, J5 Terminal Block RJ128 (optional)
Pin Function
J1 CH1
GND
J2 GND
CH2
J3 CH3
CH4
J4 CH5
GND
J5 GND
CH6

Speaker Output Connector:

  • J15, J16, J17, J18, J19, J20 Terminal Block RJ128
Pin Function
J15 OUT1-
OUT1+
J16 OUT2+
OUT2-
J17 OUT3-
OUT3+
J18 OUT4+
OUT4-
J19 OUT5-
OUT5+
J20 OUT6+
OUT6-

WONDOM - logo

Sure Electronics
Make Your Audio Application Simple!
NO.9, Weidi Road, Xianlin University City, Qixia District, Nanjing, Jiangsu Province, P.R.C
www.sure-electronics.com
www.wondom.com
Mail: store@sure-electronics.com
Skype: surewebstore

Documents / Resources

WONDOM AA-AB34181 Class D Audio Amplifier Board [pdf] Owner's Manual
AA-AB34181, Class D Audio Amplifier Board, Audio Amplifier Board, Amplifier Board, AA-AB34181, Board

References

Leave a comment

Your email address will not be published. Required fields are marked *