www.wolfvision.com
Cynap Core PRO
Quick Start Guide

vSolution Cynap Core PRO by WolfVision

Introduction

Cynap Core PRO by WolfVision® delivers an all-in-one collaboration and presentation solution, featuring BYOD, streaming to vSolution Cynap systems, and a document and media player, with support for up to 4K UHD resolution.
Hardware Connection
Make all necessary connections according to the following illustrations. Plugin the power cord as the last step. Power on the equipment. Typical Setup

Connect and Control

Operating for the first time
When Cynap is switched on, all settings can be set in the password-protected settings of the graphical user interface (GUI). Access the GUI by using a web browser on your connected PC or tablet (input the IP address), by using the optional remote control, or by using a connected USB mouse and keyboard. Push the button at the right edge to open the Control center and click on the cogwheel.

Cynap Core PRO Setup

Initial default admin password: Password Check the integrated help for further details.

Miracast on Windows 8.1+ (Wireless Display)
Miracast on Windows

1.  Press + K to list local Miracast receivers.
2.  Select your Cynap system.
3. Activate User Input Back Channel on the Windows device to allow touch back control of it via Cynap system connected touch screen.

AirPlay on MacBook, iMac
AirPlay on MacOS

1. Connect to the Cynap system using the listed WLAN settings.
2. Click in the menu bar at the top of your screen.
3. Select your Cynap system.

AirPlay on iPhone / iPad
AirPlay on iOS

1. Connect to the Cynap system using your camera to scan the QR code.
2. Swipe down to open Control Center and tap on Screen Mirroring.
3. Tap on your Cynap system.

Chromecast on the Chrome browser
Chromecast on Windows, macOS, and Linux

1. Connect to the Cynap system using the listed WLAN settings.
2. Open your Chrome browser and click on the browser menu then Cast…
3. Select cast desktop or browser window and select your Cynap system.

Chromecast on Android

1. Connect to the Cynap system using the listed WLAN settings.
2. Swipe down to open Quick Settings and select Screen Mirroring.
3. Tap on your Cynap system.
   

vSolution Cast on Windows

1. Connect to the Cynap system using the listed WLAN settings.
2. Start vSolution Cast.
3. Tap on your Cynap system.

Documents / Resources

	wolfvision Cynap Core Pro Advanced Collaboration and Presentation [pdf] User Guide Cynap Core Pro Advanced Collaboration and Presentation, Cynap Core Pro, Advanced Collaboration and Presentation
	WOLFVISION Cynap Core Pro Advanced Collaboration and Presentation [pdf] Instructions Cynap Core Pro Advanced Collaboration and Presentation, Cynap Core Pro, Advanced Collaboration and Presentation, Collaboration and Presentation, Presentation

References

• User Manual