TRAIL CAMERA
User Manual
WT07 Trail Camera
BRAND WARRANTY
IN THE BOX
Product Overview
Packaging may vary between production batches.
Actual product appearance is subject to the physical item received.
Preparation Before Use
1. Install batteries 
The product requires 8 batteries, please do not mix old and new batteries (DC interface: 6V 2A adapter)
2. Install the antenna (install as shown n the picture)
3. Install SIM card and TF card 
Note: Wrong card insertion will damage the card holder. Please insert the SIM card and TF card as shown in the figure
4. Install the strap
Description
| 4G Antenna | Receive 4G signals. Please install the antenna before use to ensure the 4G signal is normal. |
| Infrared Light | When the ambient light is insufficient, the infrared light is enabled to increase the brightness of the environment. It is often used for night shooting fill light. |
| Camera | Used for taking photos/videos. The lens will collect the ambient brightness when shooting. When the illumination is low, switch IRCUT to enable the infrared light for shooting. |
| Microphone | Collect ambient sound |
| Speaker | Emit system prompt sound and video playback sound |
| Blue light | When the toggle switch is turned to ON mode, the blue light flashes. |
| Red light | When the toggle switch is turned to SETUP mode, the PIR detects the trigger signal and the red light flashes |
| PIR sensor | When the animal moves in front of the device, the camera starts to capture in time, uploads it to the cloud service and saves it in the TF card. |
| LCD | When the device is turned on, you can view the 4G signal strength, cloud server connection status, shooting resolution, TF card storage information, battery power, time/date and other information on the display. |
| Nano SIM card slot | Load Nano SIM card, pay attention to the direction of card insertion. |
| TF card slot | Load TF card, pay attention to the direction of card insertion |
| USB interface | Used to connect to computer USB and view pictures/ videos in TF card on computer |
| DC interface | Accept 6V/2.0A adapter |
| 1/4 nut interface | Universal 1/4 screw fixing bracket |
Specifications
| Support TF card | 16GB-128GB |
| Number of continuous shots | 1-3 photos |
| Pixels for 4G uploaded photos | 1280*720; supports obtaining high-definitio photos, consuming 3 standard-definition photos |
| Resolution for 4G uploaded videos | 640*360@15fps; supports obtaining high-definition videos |
| File format | JPEG/MPEG-4 (H.264) |
| LCD display | 2.0-inch LCD Display |
| PIR sensing angle | 60 degrees |
| Number of infrared fill lights | 2PCS high-power infrared fill light; 850nm |
| Maximum night vision sensing distance | 65ft/20 meters |
| Trigger interval | 5 seconds-60 minutes (default 30 seconds) |
| Interface | USB; TF memory card socket; 6V DC power supply DC interface |
| Working temperature | -20°C to 60°C |
| Power supply | 8 AA batteries or DC: 6V-2.0A |
| Fixed interface | 1/4-inch standard interface |
| Waterproof level | IP66 |
Button Instruction
 |
Mode Button | OFF Mode: Turn off the camera The camera is completely off. Only in OFF mode should you unplug the memory card or replace the batteries. ON Mode: Turn on the camera When the camera is on, it will enter a countdown. And after the countdown ends, the camera will enter working mode SETUP /Test Mode: Adjust settings/Start operating When switched from OFF to SETUP, the screen display will go into the preview mode. You can manually record video, take photos, and playback the recorded video files or change settings. In the preview mode, the PIR sensor is on. When they are triggered, the light indicator will flash, but the camera will not take photos or record videos automatically. |
 |
Menu Button | Go into the menu/Return to the previous page |
 |
Playback Button | Enter or exit playback mode |
 |
UP Button | 1.Move up/Page forward 2.In preview/test mode, switch the camera to photo moi |
 |
Down Button | 1.Move down/Page back 2.In the preview/test mode, switch the camera to the video mode |
 |
Left Button | Move left |
 |
Right Button | Move right |
 |
OK Button | 1.Confirm the photo/video mode 2.Start/pause video playback 3.Enter the selected project/save settings |
LCD Display Description
 |
Photo/Video Mode Icon | |
 |
TF Card Status Icon | |
 |
Photo Pixels/Video Resolution | |
 4G Network |
 |
Nano SIM Card Status |
 |
SIM Card Recognized but Error Connecting to 4G Network | |
 |
Poor 4G Signal / Expired SIM Card Plan | |
|
Normal SIM Card Reading / Plan is Normal and 4G Signal is Good | |
 Cloud Service |
|
Connected to Cloud Service |
 |
Not Connected to Cloud Service | |
 |
Failed to Connect to Cloud Service | |
 |
Battery Status Icon | |
 |
Date and Time Display | |
APP Operation Instructions
1. Scan the QR code to download the APP
Note:
- This app does not collect any user information or disclose user privacy.
- When installing the app for the first time, please allow all requested permissions.
- Please install the device in an area with good 4G signal reception.
2. Connect the camera to your smartphone
- Install the camera’s 4G antenna, insert the SIM card and TF card, switch the camera to Setup mode, and wait about a minute for the 4G network and cloud service to connect properly.
- Access the Trail Cam Go app and allow all requested permissions.
- Register your account.
- 1 Connect the camera (directly via Bluetooth) as shown in the image.
2 Manually add the camera as shown in the images.
Product Setup and Installation
This product’s imaging range s within a 60-degree sector directly n front of the camera, with an optimal imaging distance of 3-10 meters.
To achieve the desired detection and imaging results, please perform setup and installation as follows:
- Mount the product in a suitable location, close to the height of the animal being detected. The recommended mounting height is 1 meter, horizontally or 2 meters, tilted downward 4 degrees.
- Walk sideways in front of the product’s main PIR sensor window. When the red indicator light flashes once, the PIR has detected an animal and your area is now the effective detection zone. Repeated testing will determine the effective detection zone of the PIR.
Note:
- Daytime Shooting Mode: The infrared light is off, allowing color photos and videos to be captured.
- Nighttime Shooting Mode: The infrared light provides the illumination necessary for nighttime or low-light conditions, resulting in black and white photos and videos.
- The default interval s 30 seconds, adjustable from 5 seconds to 60 minutes.
- Before entering automatic PIR sensing shooting mode, please configure the operating mode and related parameters in SETUP mode.
Connecting to a PC
Connect the product to a computer via a Type-C USB cable. The USB connection icon will appear on the display, indicating a successful connection.
You can now read, copy, and delete the TF card in the device.
Troubleshooting
- The camera automatically shuts down in ON mode.
• This is normal. Please configure the parameters in SETUP mode. - Image s blurry or out of focus.
• Check the camera ens for dirt.
• Remove the ens protective film. - I have forgotten my product password.
• Please enter the default password of 1111. - The camera trigger interval is long.
• Adjust the camera’s PIR sensitivity level to a high setting.
• If you do not use the 4G function, turn off Cellular. Otherwise, the trigger interval will be longer. - Video recording has no sound.
• Please set the camera’s system menu’s “Recording Volume” to ON.
• Please check f the recording port is blocked. - Confirm that the PIR is triggering properly.
• In Setup mode, enter Motion Test mode n the menu to check the number of PIR triggers.
• The PIR will flash red when an animal passes by.
• Ensure that the PIR protective film s removed before use.
Documents / Resources
 | WT07 Trail Camera |
References
- User Manualmanual.tools
Published: November 27, 2025
Updated: November 28, 2025
Salve chiedo se la schema sim 4g data in dotazione a una durata o e senpre attiva
Does the included 4G SIM card have a limited duration or is it always active?
Based on the manual for the WOLFANG WT07, the 4G SIM card requires an active data plan to function. While the camera comes with a SIM card, it is not "always active" for free indefinitely.
Note: If you do not wish to use the 4G features, you can turn off "Cellular" in the settings to save battery, though the camera will then only save files to the local TF card.
_en
Read the full Q&A page
Che scheda video va installata?
What memory card should be installed in the WOLFANG WT07 trail camera?
The WOLFANG WT07 trail camera requires a TF card (also known as a microSD card) for storage. According to the product specifications, the requirements are:
Please note that the camera also requires a Nano SIM card if you intend to use its 4G cloud features.
Read the full Q&A page
Se puede usar una tarjeta sim de compañías nacionales?
Can I use a SIM card from national carriers with this camera?
Yes, the WOLFANG WT07 trail camera is designed to work with 4G networks and uses a Nano SIM card. While the package typically includes a SIM card (as shown in the 'In The Box' section on page 4), the manual indicates that the device functions by receiving 4G signals to upload photos and videos to a cloud service.
To use a national carrier's SIM card, ensure the following:
If you encounter issues with a third-party SIM, check the LCD display for status icons (page 14/54). A '?' icon over the signal bars indicates a poor signal or an expired/unrecognized SIM card plan.
Note: If you do not intend to use the cellular functions, you can turn off the 'Cellular' setting in the menu to save battery life.
Read the full Q&A page