WOLF CE152TF-S Integrated Modules
FEATURES
- Two elements, three zones accommodate different pan sizes
- High-frequency pulsation technology for superior performance and control
- True simmer setting for soups, sauces, and more
- Super-low Melt setting for fine chocolate and other delicate foods
- Rigorously tested in our U.S. manufacturing facilities for decades of use
- Exceptional 24/7 support from our Customer Care team in Madison
Illuminated touch controls - Hot surface indicator lights when the temperature exceeds 150°F
- The temperature limiter ensures that safe operating temperatures are never exceeded
- Universal “off” turns all elements off
- Control panel lock for safety
- Automatic timer up to 99 minutes
- Ceran ceramic glass resists scratching, staining, impact, and heat
TOP CONFIGURATION
COOKTOP SPECIFICATIONS
- 1–51/2″ Single Element (1200W)
- 1–8″ Dual Element (700/2200W)
PRODUCT SPECIFICATIONS
- Model CE152TF/S-208
- Dimensions 15″W x 31/2″H x 21″D
- Weight 30 lb
- Electrical Supply 3-wire, 208 VAC, 60 Hz
- Electrical Service 20 amp dedicated circuit
- Conduit Length 4 feet
ELECTRICAL
DIMENSIONS
STANDARD INSTALLATION
NOTE: Shaded area above countertop indicates minimum clearance to combustible surfaces, combustible materials cannot be located within this area.
FAQ
General Errors Table – CE152TF/S, CI152TF/S and TM15TF/S
| Code | Description | Test | Action |
|---|---|---|---|
| 22 | Pad Error | None | 1. Cycle unit power. 2. Reseat LV Wire Harness – CE. 3. Reseat comm cable -CI and TM. 4. Perform unit reconfiguration. 5. Replace control board. |
| 30 | Data Flash Error (result of flashing software) | None | 1. Cycle unit power. 2. Perform unit reconfiguration. 3. Replace the control board. |
Documents / Resources
 | CE152TF-S Integrated Modules |
References
- User Manualmanual.tools
Published: June 24, 2025
Updated: June 25, 2025