Winplus RML24 2.4G Remote Controller
Product Information
Specifications
- Remote Controller Type: 2.4G
- Color Selection: 15 types
- Modes: 24 types
- Brightness Levels: 5 adjustable levels
- Shortcut for Color Change: 9 colors
Product Usage Instructions
Power On/Off
- Press the power button once to turn the controller on or off.
Color Selection
- Choose from the available 15 color options by selecting the desired color on the controller.
Modes
- Explore the 24 different modes available by cycling through them using the mode button.
Brightness Adjustment
- Adjust the brightness level using the controller’s brightness button.
- There are 5 levels of brightness to choose from.
Shortcut for Color Change (9 Color)
- Quickly switch between 9 preset colors by pressing the corresponding color button on the controller.
General Operating Instructions
- Power On/ Off: Press once to turn on or off
- Color selection: 15 types
- Mode: 24 types
- Brightness adjustment: 5 levels of brightness can be adjusted
- Shortcut for Color Change (9 Color): Press once to display the corresponding color
Note: Pairing: Receiver (valid for 10 seconds before powering on), Transmitter (Long press the switch button for 2S), White light flashes when pairing is successful
Clear Pairing: The receiver (valid for 10 seconds before powering on), the Transmitter (Press and Hold the brightness button for 2S), and the Yellow light flashes when the clearing is successful
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.
FAQ
How do I pair the remote controller?
To pair the receiver, ensure it is valid for 10 seconds before powering on. For the transmitter, long-press the switch button for 2 seconds. A white light will flash when pairing is successful.
How do I clear pairing settings?
To clear pairing, make sure the receiver is valid for 10 seconds before powering on. For the transmitter, press and hold the brightness button for 2 seconds. A yellow light will flash when clearing is successful.
What should I do if I encounter interference issues?
If you experience interference, consider reorienting or relocating the receiving antenna, increasing separation between devices, connecting to a different outlet, or consulting a professional for assistance.
Is there any restriction on RF exposure with this device?
The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.
Documents / Resources
 |
Winplus RML24 2.4G Remote Controller [pdf] Instruction Manual WUI-RML24, WUIRML24, rml24, RML24 2.4G Remote Controller, RML24, 2.4G Remote Controller, Remote Controller, Controller |