WINLAND-logo

WINLAND D-011-0009 Water Detector and Alarm Additional Sensor

WINLAND-D-011-0009-Water-Detector-and-Alarm-Additional-Sensor-fig-1

W-S-S (Supervised Surface Water Sensor)
The supervised sensor can be connected to the full line of EnviroAlert® and EnviroAlert Professional® products. The alarm will be activated if water is present as well as if the cable is cut.

W-S-U (Unsupervised Surface Water Sensor)
The unsupervised sensor can be connected to the full line of WaterBug® products. No alarm will sound if the cable is cut.

Mounting Instructions

If a W-S-U or W-S-S is to be bolted down in a permanent installation, drill only in the innermost center recessed area. Drilling anywhere other than the innermost circle may damage the internal wiring causing the sensor to fail.

WINLAND-D-011-0009-Water-Detector-and-Alarm-Additional-Sensor-fig-21

ENVIRONMENTAL COMPLIANCE

For all environmental compliances, please see: http://environmental-compliance.winland.com

WARRANTY AND SERVICE INFORMATION

  • Winland Electronics, Inc. (“Winland”) warrants to the original purchaser from Winland that each product of Winland’s that it manufactures shall be free from defects in material and factory workmanship for one (1) year from the date of purchase when properly installed and operated under normal conditions according to Winland’s instruction.
  • Winland’s obligation under this limited warranty is limited to correcting the product without charge, at its factory any part or parts thereof which are returned, transportation charges prepaid, to the factory within one year of the date of purchase subject to Winland’s examination showing to Winland’s satisfaction to be covered by this warranty.
  • Product returns will not be accepted unless a Return Material Authorization has been issued by Winland, which is subject to the purchaser’s identification of the purchase order number and product serial number. UNAUTHORIZED RETURN SHIPMENT OR SHIPMENT CONTRARY TO WINLAND’S WRITTEN INSTRUCTIONS WILL VOID THIS LIMITED WARRANTY. Correction of such defects by repair, replacement, or refund of the amount paid for the product, at Winland’s option, shall constitute fulfillment of all Winland’s obligations under this limited warranty. Repaired and replacement parts will be warranted for the remainder of the original product warranty. Repairs not covered by this limited warranty may be offered by Winland for a charge.
  • This limited warranty shall not apply to any of Winland’s products that have been subject to misuse, negligence, or accident, or which have been repaired or altered outside of Winland’s factory.
  • THIS LIMITED WARRANTY IS INSTEAD OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSES, NON-INFRINGEMENT, DESIGN, AND TITLE, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING, USAGE OF TRADE OR OTHERWISE. ALL OTHER REPRESENTATIONS MADE TO THE END USER/PURCHASER BY ANY OTHER PARTY ARE EXCLUDED. No person, agent, or dealer is authorized to give warranties on behalf of Winland nor to assume for Winland any other liability in connection with any Winland product.
  • WINLAND SHALL NOT BE LIABLE TO ANY PERSON FOR INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY DESCRIPTION, WHETHER ARISING OUT OF WARRANTY OR OTHER CONTRACT, NEGLIGENCE, OTHER TORT, STRICT LIABILITY OR OTHERWISE. Under no circumstances shall Winland’s liability under this limited warranty exceed the purchase price paid by the end user/purchaser for the product. The parties agree that the limitation of remedies in this document is an agreed-upon allocation of risk and does not cause the remedy to fail in its essential purpose.

Tech Support

Documents / Resources

WINLAND D-011-0009 Water Detector and Alarm Additional Sensor [pdf] User Guide
D-011-0009 Water Detector and Alarm Additional Sensor, D-011-0009, Water Detector and Alarm Additional Sensor, Alarm Additional Sensor, Additional Sensor, Sensor

References

Leave a comment

Your email address will not be published. Required fields are marked *