Wheeler Display Stack Chair
Product Specifications
- Model: XYZ-123
- Dimensions: 10 x 6 x 4 inches
- Weight: 5 lbs
- Material: Steel
- Color: Black
General Guidelines
- 2 people required to assemble.
- Assemble on a soft, clean surface.
- Assemble with clean hands and tools.
- Do not tighten screws until all screws are in the holes.
Parts List
| Part | Quantity | Description |
|---|---|---|
| A | 5 | Slats |
| B | 3 | Frame Crossbars |
| C | 2 | Side Frames |
| D | 2 | Armrests |
| E | 1 | Backrest |
| F | 10 | Screws 6*13mm |
| G1 | 2 | Screws 6*25mm |
| G | 4 | Screws 6*30mm |
| G2 | 2 | Screws 6*35mm |
| H | 2 | Washers |
| I | 1 | Allen Key |
Assembly Steps
Step 1
Attach the side frames (C) to the frame crossbars (B) using screws (F) and the Allen key (I).
- Align the side frames with the crossbars.
- Insert screws (6*13mm) and tighten slightly.
Step 2
Attach the slats (A) to the frame using screws (G1).
- Position the slats evenly across the frame.
- Secure with screws (6*25mm).
Step 3
Attach the backrest (E) using screws (G2) and washers (H).
- Align the backrest with the frame.
- Use screws (6*35mm) and washers for secure attachment.
Step 4
Attach the armrests (D) using screws (G).
- Align armrests with the frame.
- Secure with screws (6*30mm).
Frequently Asked Questions
Do I need any special tools for assembly?
No, basic tools like a screwdriver should be sufficient for assembly.
Can the product be disassembled for storage?
Yes, you can follow the assembly instructions in reverse to disassemble the product for storage or transport.
Documents / Resources
 |
Wheeler Display Stack Chair [pdf] Instruction Manual Stack Chair, Stack, Chair |