Weofly Active 3 Smart Watch User Manual

Weofly-logo

Weofly Active 3 Smart Watch

Weofly-Active-3-Smart-Watch-product

Product Overview

The Weofly Active 3 is a smartwatch that powers on via the power key, can be operated from the main interface (including changing the dial face), and connects to a smartphone using the Weofly Fit app for calls, notifications, and other functions.

Specifications

Model No. Weofly Active 3
Device pairing app Weofly Fit
Smartphone OS requirements iOS 9.0 and above; Android 4.4 and above
Bluetooth requirement Bluetooth 5.0 compatibility

Quick Setup & Basic Use

  1. Charge the watch for at least 2 hours before first use.
  2. Place your smartphone adjacent to the watch and turn on your smartphone’s Bluetooth.
  3. Install and open the “Weofly Fit” app.
  4. In the app, set up your personal profile, then go to the Device page and tap Add a new device.
  5. Select Weofly Active 3 from the scanned device list to connect; binding will complete.
  6. To power on/off, press and hold the power key for 3 seconds.
  7. On the main interface, press and hold the screen to switch the dial face.
  8. To sync address book contacts: in the app, go to Device > Address Book > Open > select contacts > Import.

Basic Introduction to the Product

Weofly-Active-3-Smart-Watch-fig-1

Basic Product Operation

Weofly-Active-3-Smart-Watch-fig-2

  1. Press the power key for 3 seconds to turn the device on or off.
  2. On the main interface, press and hold the screen to switch the dial face.

APP Download, Installation and Use

Before pairing your watch with a smartphone, please ensure that your devices are prepared as follows:

  1. When using the watch for the first time, charge it for at least 2 hours to ensure it is fully charged.
  2. Ensure that your smartphone is kept adjacent to your watch.
  3. Ensure that the Bluetooth function of your smartphone is turned on.

Scan the following QR code to download and install the “Weofly Fit” App. Device Requirements: iOS 9.0 and above, Android 4.4 and above, Bluetooth 5.0 compatibility.

Weofly-Active-3-Smart-Watch-fig-3Note: The watch name and MAC address can be queried within the watch settings menu.

Important Notification Note: If you did not allow the watch to receive incoming call reminders and message notifications during the initial pairing process, you must unbind your device and pair your watch again to activate them. After re-pairing, go to the “Devices” page of the APP, select “APP”, and check the specific applications you want to receive messages from.

Basic product functions

Weofly-Active-3-Smart-Watch-fig-4

How to Connect the App via Bluetooth

Weofly-Active-3-Smart-Watch-fig-5

Before using the SmartWatch: Please fully charge the watch and download the compatible free app “Weofly Fit” from the App Store or Google Play Store.

Weofly-Active-3-Smart-Watch-fig-6

  1. Firstly please connect the compatible App and bluetooth in the mobile phone setting.
    HOW TO MAKE A CALL
    If you can’t make a call, please turn on the “dial” iconWeofly-Active-3-Smart-Watch-fig-7
  2. How to syn the address book on the watch? Please open the APP and go to the”device” page, click “AddressBook”—“Open”—“Select contacts” —-“imports”, then done.
  3. When talking on the watch without voice, please check watch mic whether on or off, also check the volume on the phone or watch.
    If it still doesn’t make a call, please close the bluetooth a while and reconnect Bluetooth in the APP and mobile phone bluetooth setting.

Other Functions

Do Not Disturb (DND) Mode / Stopwatch / Countdown Timer / Flashlight / Calculator / Alarm Clock Reminder / Sedentary Reminder / Find Phone, etc.

Disclaimer

This product is not an electrocardiogram (ECG) or professional medical device. Any health measurements or data provided by the device are for general reference only and cannot be used for clinical or medical diagnostics.

Usage Warnings and Attention

  1. Keep the product clean and dry.
  2. Ensure you wear the product correctly.
  3. Do not expose the device and its accessories to extreme temperatures, as this may lead to equipment malfunction, fire, or explosion.
  4. Avoid strong impacts, drops, or vibrations to prevent structural damage.
  5. Do not disassemble or modify the equipment or its accessories without authorization. If a failure occurs, contact official after-sales service.
  6. The waterproof performance of this product is not permanent and may degrade over time. The watch supports short-term exposure such as hand washing and rain, but does not support hot showers, sauna, diving, or surfing. The watch has no resistance against corrosive liquids such as seawater, acid/alkaline solutions, or chemical reagents.
  7. If the device is not used for an extended period, recharge it at least once every three months to preserve battery life.

Troubleshooting

  • Cannot make calls: Turn on the dial icon on the watch control panel. Also confirm the watch microphone is enabled and check volume levels on both the phone and the watch.
  • No voice during talking on the watch: Verify that the watch microphone is turned on, and check volume level on both the mobile phone and the watch.
  • Connection issues (calls still fail): Briefly turn off mobile Bluetooth, then reconnect the device through both the app and your system Bluetooth settings.
  • Call reminders/message notifications not active after pairing: If you did not allow the watch to receive incoming call reminders and message notifications during initial pairing, unbind and pair the watch again. After re-pairing, open the app’s Devices page, select APP, and check the specific applications you want to receive messages from.

Documents / Resources

PDF thumbnailActive 3 Smart Watch
User Manual · Weofly, Weofly Active 3, Active 3, smartwatch, user manual

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.