WENZHOU F6 Socket Panel Socket

Overview
The SOCKET model F6 is a switch device that requires careful electrical handling. Before wiring or charging, switch off the circuit breaker, power test, and follow the parameters indicated on the product.
Specifications
| Product name | SOCKET |
| Model | F6 |
| Batch/Serial number | 20260318 |
| Charging input (as stated) | USB cable to a certified 5V power adapter |
| Compliance | CE |
Quick Setup & Use
- Remove all protective films from the device.
- Turn off the circuit breaker and use an electrical tester to confirm power is off.
- Remove the old switch and pull it away from the wall; identify the Line/Load wire. (Wire colors may differ from the manual.)
- Remove the faceplate from the old switch and test all connected wires to ensure there is no voltage.
- Take photos of the original wiring route before disconnecting.
- Before starting any wiring, keep the circuit breaker off.
- Charging: Connect the provided USB cable to a certified 5V power adapter
Safety & Warnings
Important Safety Information
Risk of electric shock:lmproper handling may result in injury and property damage.lf you are unsure about any part of these instructions, contact a qualified electrician for professional help.
- Make sure that the switch is off before connecting.
- When using, follow the actual parameters indicated on the back of the product.
- Before installation, please make sure that all the equipment is worn out and the wiring is normal.
- Please read and fully understand the instructions carefully before starting work. If you have any questions, please contact our customer support team.
Instructions for Use
- Before First Use: Remove all protective films from the device.
- Turn off the circuit breaker and use the electrical tester to test the power
- Ensure the circuit breaker is off before wiring
- Remove the old switch and pull it away from the wall. Identify Line/Load Wire(Note: The color of your wire may be different from the color shown on the manual)
- We recommend you remove the faceplate from the old switch and use an electrical tester to test all wires connected to the switch to ensure there is no voltage in the circuit.
- Take photos of the original route first
- Charging: Connect the provided USB cable to a certified 5 V power adapter.

MANUFACTURER & EU REPRESENTATIVE INFO
- Company Name: WENZHOU SHANGRAN ELECTRICAL CO., LTD.
- Full Address: China Zhejiang Province Wenzhou Ouhai District Quxi Subdistrict Qurenlu Sanyi Industrial Park Building I Floor 4
- Email: 1432020646@qq.com
- EU Authorized Representative: AR Company Name: ECLAT SOLUTION SARL
- Full Address: Bureau 1 145, 37 Passage du Ponceau
- Telephone: +33 187652619
- Email: eclatsolution@outlook.com
Troubleshooting
- If you are unsure about any part of the instructions, contact a qualified electrician for professional help.
- If you suspect wiring issues, ensure the circuit breaker is turned off and use an electrical tester to verify there is no voltage before proceeding.
- Before connecting, make sure the switch is off.
- Before installation, confirm all equipment is turned off/worn out and that the wiring is normal.
Documents / Resources
![]() | F6 Socket Panel Socket |
References
- User Manualmanual.tools
Published: November 15, 2026
Updated: November 17, 2026
